Surface integrity in finish hard turning of case-hardened steels

Highly stressed steel components, e.g., gears and bearing parts, are appropriate applications for hard turning. Therefore, the process effects on significant engineering properties of work materials have to be carefully analyzed. Roughness, residual stresses, and white layers as parts of surface integrity, are functions of the machining parameters and of the cuttability of the cutting edge, i.e. of the tool wear.The aim of this work was to study the influence of feed rate, cutting speed, and tool wear on the effects induced by hard turning on case-hardened 27MnCr5 gear conebrakes and to point out the technical limitations in mass production.     

Magnebike: A magnetic wheeled robot with high mobility for inspecting complex‐shaped structures

This paper describes the Magnebike robot, a compact robot with two magnetic wheels in a motorbike arrangement, which is intended for inspecting the inner casing of ferromagnetic pipes with complex‐shaped structures. The locomotion concept is based on an adapted magnetic wheel unit integrating two lateral lever arms. These arms allow for slight lifting off the wheel in order to locally decrease the magnetic attraction force when passing concave edges, as well as laterally stabilizing the wheel unit. The robot has the main advantage of being compact (180 × 130 × 220 mm) and mechanically simple: it features only five active degrees of freedom (two driven wheels each equipped with an active lifter stabilizer and one steering unit). The paper presents in detail design and implementation issues that are specific to magnetic wheeled robots. Low‐level control functionalities are addressed because they are necessary to control the active system. The paper also focuses on characterizing and analyzing the implemented robot. The high mobility is shown through experimental results: the robot not only can climb vertical walls and follow circumferential paths inside pipe structures but it is also able to pass complex combinations of 90‐deg convex and concave ferromagnetic obstacles with almost any inclination regarding gravity. It requires only limited space to maneuver because turning on the spot around the rear wheel is possible. This high mobility enables the robot to access any location in the specified environment. Finally the paper analyzes the maximum payload for different types of environment complexities because this is a key feature for climbing robots and provides a security factor about the risk of falling and slipping. © 2009 Wiley Periodicals, Inc.     

Multilevel assessment method for reliable design of composite structures

This work aims at demonstrating the interest of a new methodology for the design and optimization of composite materials and structures. Coupling reliability methods and homogenization techniques allow the consideration of probabilistic design variables at different scales. The main advantage of such an original micromechanics-based approach is to extend the scope of solutions for engineering composite materials to reach or to respect a given reliability level. This approach is illustrated on a civil engineering case including reinforced fiber composites. Modifications of microstructural components properties, manufacturing process, and geometry are investigated to provide new alternatives for design and guidelines for quality control.     

Heuristics for the multi-period orienteering problem with multiple time windows

We present the multi-period orienteering problem with multiple time windows (MuPOPTW), a new routing problem combining objective and constraints of the orienteering problem (OP) and team orienteering problem (TOP), constraints from standard vehicle routing problems, and original constraints from a real-world application. The problem itself comes from a real industrial case. Specific route duration constraints result in a route feasibility subproblem. We propose an exact algorithm for this subproblem, and we embed it in a variable neighborhood search method to solve the whole routing problem. We then provide experimental results for this method. We compare them to a commercial solver. We also adapt our method to standard benchmark OP and TOP instances, and provide comparative tables with state-of-the-art algorithms.     

Computing efficiently the lattice width in any dimension

We provide an algorithm for the exact computation of the lattice width of a set of points K in Z² in linear-time with respect to the size of K. This method consists in computing a particular surrounding polygon. From this polygon, we deduce a set of candidate vectors allowing the computation of the lattice width. Moreover, we describe how this new algorithm can be extended to an arbitrary dimension thanks to a greedy and practical approach to compute a surrounding polytope. Indeed, this last computation is very efficient in practice as it processes only a few linear time iterations whatever the size of the set of points. Hence, it avoids complex geometric processings.     

Generation of Efficient Nested Loops from Polyhedra

Automatic parallelization in the polyhedral model is based on affine transformations from an original computation domain (iteration space) to a target space-time domain, often with a different transformation for each variable. Code generation is an often ignored step in this process that has a significant impact on the quality of the final code. It involves making a trade-off between code size and control code simplification/optimization. Previous methods of doing code generation are based on loop splitting, however they have nonoptimal behavior when working on parameterized programs. We present a general parameterized method for code generation based on dual representation of polyhedra. Our algorithm uses a simple recursion on the dimensions of the domains, and enables fine control over the tradeoff between code size and control overhead.     

NMscatt: a program for calculating inelastic scattering from large biomolecular systems using classical force-field simulations

Computational tools for normal mode analysis, which are widely used in physics and materials science problems, are designed here in a single package called NMscatt (Normal Modes & scattering) that allows arbitrarily large systems to be handled. The package allows inelastic neutron and X-ray scattering observables to be calculated, allowing comparison with experimental data produced at large scale facilities. Various simplification schemes are presented for analyzing displacement vectors, which are otherwise too complicated to understand in very large systems.

Program summary

Title of program:NMscattCatalogue identifier:ADZA_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADZA_v1_0.htmlProgram obtainable from:CPC Program Library, Queen's University of Belfast, N. IrelandLicensing provisions:noNo. of lines in distributed program, including test data, etc.:573 535No. of bytes in distributed program, including test data, etc.:4 516 496Distribution format:tar.gzProgramming language:FORTRAN 77Computer:x86 PCOperating system:GNU/Linux, UNIXRAM:Depends on the system size to be simulatedWord size:32 or 64 bitsClassification:16.3External routines:LAPACKNature of problem: Normal mode analysis, phonons calculation, derivation of incoherent and coherent inelastic scattering spectra.Solution method: Full diagonalization (producing eigen-vectors and eigen-values) of dynamical matrix which is obtained from potential energy function derivation using finite difference method.Running time: About 7 hours per one k-point evaluation in sampling all modes dispersion curves for a system containing 3550 atoms in the unit cell on AMD Athlon 64 X2 Dual Core Processor 4200+.     

A new approach of data clustering using a flock of agents

This paper presents a new bio-inspired algorithm (FClust) that dynamically creates and visualizes groups of data. This algorithm uses the concepts of a flock of agents that move together in a complex manner with simple local rules. Each agent represents one data. The agents move together in a 2D environment with the aim of creating homogeneous groups of data. These groups are visualized in real time, and help the domain expert to understand the underlying structure of the data set, like for example a realistic number of classes, clusters of similar data, isolated data. We also present several extensions of this algorithm, which reduce its computational cost, and make use of a 3D display. This algorithm is then tested on artificial and real-world data, and a heuristic algorithm is used to evaluate the relevance of the obtained partitioning.     

Semantic web technologies to reconcile privacy and context awareness

Increasingly, application developers are looking for ways to provide users with higher levels of personalization that capture different elements of a user’s operating context, such as her location, the task that she is currently engaged in, who her colleagues are, etc. While there are many sources of contextual information, they tend to vary from one user to another and also over time. Different users may rely on different location tracking functionality provided by different cell phone operators; they may use different calendar systems, etc. In this article, we describe work on a Semantic e-Wallet aimed at supporting automated identification and access of personal resources, each represented as a Semantic Web Service. A key objective is to provide a Semantic Web environment for open access to a user’s contextual resources, thereby reducing the costs associated with the development and maintenance of context-aware applications. A second objective is, through Semantic Web technologies, to empower users to selectively control who has access to their contextual information and under which conditions. This work has been carried out in the context of myCampus, a context-aware environment aimed at enhancing everyday campus life. Empirical results obtained on Carnegie Mellon’s campus are discussed.