Role of chain symmetry and hydrogen bonding in segmented copolymers with monodisperse hard segments

Thermoplastic segmented polyurethane and polyurea copolymers whose monodisperse hard segments are based on only a single diisocyanate molecule are discussed. The solid-state structure-property behavior of these materials demonstrates that a proper selection of the level of symmetry and/or cohesiveness of the hard microdomains may allow elimination of the traditional requirement of chain extension to obtain melt processable segmented urethanes, and more specifically, urea copolymers with useful structural properties.     

A light refractory concrete for thermal insulation

Compositions have been developed for nonshrinking vibrocast thermally insulating light refractory concretes with densities of 1.0, 1.3, 1.5, and 1.8 g/cm³ for temperatures of use up to 1400°C. The structure and properties have been examined for the concrete of density 1.3 g/cm³. __________ Translated from Novye Ogneupory, No. 4, pp. 29–32, April, 2008.     

Turbulent flow of a chemically reactive gas suspension in a channel with a blow

The influence of the chemical reactions occurring in the gas phase of a gas suspension flowing in a channel with penetrable walls and the combustion of the condensed-impurity particles in this flow on its gasdynamic structure has been investigated. It is shown that the order of the system of equations defining a flow of a chemically reactive gas suspension with a homogeneous exothermic reaction proceeding at a definite rate and a heterogeneous combustion of the condensed-phase particles can be decreased if certain assumptions are mode. The distributions of the parameters of the gas and dispersed phases were calculated as functions of the rate of blow and the sizes of the particles. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 4, pp. 91–98, July–August, 2007.     

Measurement of forming trajectories during drilling

Results are provided for an experimental study of forming trajectories during drilling and the effect on them of cutting speed and drilling depth. __________ Translated from Izmeritel’naya Tekhnika, No. 8, pp. 31–33, August, 2006.     

Effect of coke quality on blast-furnace performance indices

The quality of coke has a strong effect on the performance indices of a blast furnace. For a furnace to operate with high productivity and a low coke rate, it is necessary to use coke with high strength characteristics. The Novolipetsk Metallurgical Combine has conducted studies of the effect of coke quality on the operation of blast furnaces of different sizes. The quality of the coke was evaluated on the basis of the following indices: CSR, CRL, the cold-strength indices M₁₀ and M₂₅, and the integral coke-quality index I_g.c used by the Sidmar company. Furnace productivity, coke rate, and the totterman index (DMI) were also used for the sake of comparison.     

Release of salicylic acid through poly(vinyl alcohol)/poly(vinyl pyrrolidone) and poly(vinyl alcohol‐g‐N‐vinyl‐2‐pyrrolidone) membranes

A controlled release profile of salicylic acid (SA) for transdermal administration has been developed. Poly (vinyl alcohol) (PVA) and Poly(vinyl alcohol)/Poly(vinyl pyrrolidone) (PVP) blended preparations were used to prepare the membranes by solvent‐casting technique. The release of the drug from the membranes was evaluated at in vitro conditions. The effects of PVA/PVP (v/v) ratio, pH, SA concentration and temperature were investigated. 60/40 (v/v) PVA/PVP ratio was found to be the best ratio for the SA release. Increase in pH and temperature was observed to increase the transport of SA. Instead of blending PVA with PVP, N‐Vinyl‐2‐pyrrolidone (VP) was grafted onto the PVA and the delivery performance for SA was compared with that of the blended PVA/PVP membranes. Grafted membranes gave higher transport percentages than the blended membranes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1244–1253, 2006     

Preparation of segmented, high molecular weight, aliphatic poly(ether-urea) copolymers in isopropanol. In-situ FTIR studies and polymer synthesis

The use of isopropanol (IPA) as the reaction solvent for the preparation of high molecular weight segmented polyether-urea copolymers based on cycloaliphatic diisocyanates was investigated. Reactivity of IPA with bis(4-isocyanatohexyl)methane (HMDI) and isophorone diisocyanate (IPDI) was studied between 0 and 40 °C using in-situ FTIR spectroscopy. HMDI, which has secondary isocyanate groups, shows a very slow reaction with a large excess of IPA at 0 and 23 °C. Analysis of the kinetic data indicates an activation energy of 51 kJ/mol for the reaction between HMDI and IPA. As expected, IPDI, which has both a primary and a secondary isocyanate (NCO) group, reacts faster with IPA compared with HMDI, which only has secondary NCO groups. However, the rate of reaction of IPDI with IPA at 0 °C is extremely slow (approximately 1% consumption of isocyanate in 60 min) thus allowing the use of IPA as the reaction solvent for polyether-urea synthesis. Preparation of high molecular weight, high-strength HMDI and IPDI based polyether-urea segmented copolymers in IPA has been demonstrated. Thermal analysis and stress-strain analyses were used to characterize the products.     

Electrospinning of polyurethane fibers

A segmented polyurethaneurea based on poly(tetramethylene oxide)glycol, a cycloaliphatic diisocyanate and an unsymmetrical diamine were prepared. Urea content of the copolymer was 35 wt%. Electrospinning behavior of this elastomeric polyurethaneurea copolymer in solution was studied. The effects of electrical field, temperature, conductivity and viscosity of the solution on the electrospinning process and morphology and property of the fibers obtained were investigated. Results of observations made by optical microscope, atomic force microscope and scanning electron microscope were interpreted and compared with literature data available on the electrospinning behavior of other polymeric systems.