Effects of ozonation process on lignin-derived compounds in pulp and paper mill effluents

The effect of ozonation process on pulp and paper mill effluents was investigated. The objectives were to: (1) identify various compounds in wastewater from a pulp and paper mill, (2) evaluate decolorization and organic removal efficiency by conventional bubble reactor and (3) evaluate the biodegradability at various progressive stages of ozonation. The qualitative GC/MS analyses were performed before and after the biological treatment and ozonation process. Two groups of compounds were observed in this wastewater: lignin-derived compounds and aliphatic compounds used in the pulp and paper production process (i.e. n-alkanes, fatty alcohols, fatty acid and ester). Treatment efficiency was measured by decolorization and TOC removal rates. Additionally, the utilization coefficient (k) and BOD/COD ratio were determined to observe the biodegradability of ozonized effluents. The results indicated that after 45 min, the ozonation of effluents yielded almost colorless effluent with over 90% decolorization efficiency and with corresponding ozone capacity rate of 20.0 mg O(3)L(-1). This decolorization was not always accompanied by the mineralization of the organic matters therefore ozonation was not related to TOC removal rates. The BOD/COD ratio increased from 0.10 to a maximum value of 0.32 with ozone flow rate (O/F) of 4.0 L min(-1). It was confirmed by the utilization coefficient as first order BOD equation, the magnitude k value increased from 0.21 day(-1) to maximum value of 0.47 day(-1) as the ozonation time was raised to 60 min with O/F 4.0 L min(-1).     

Electrospun poly(L‐lactic acid)/hydroxyapatite composite fibrous scaffolds for bone tissue engineering

Poly(L ‐lactic acid) (PLLA) is one of the most studied synthetic biodegradable polymeric materials as a bone graft substitute. Taking into account the osteoconductive property of hydroxyapatite (HAp), we prepared fibrous matrices of PLLA without and with HAp particles in amounts of 0.25 or 0.50% (w/v, based on the volume of the base 15% w/v PLLA solution in 70:30 v/v dichloromethane/tetrahydrofuran). These fibrous matrices were assessed for their potential as substrates for bone cell culture. The presence of HAp in the composite fibre mats was confirmed using energy dispersive X‐ray spectroscopy mapping. The average diameters of both neat PLLA and PLLA/HAp fibres, as determined using scanning electron microscopy, ranged between 2.3 and 3.5 µm, with the average spacing between adjacent fibres ranging between 5.7 and 8.5 µm. The porosity of these fibrous membranes was high (ca 97–98%). A direct cytotoxicity evaluation with L929 mouse fibroblasts indicated that the neat PLLA fibre mats released no substance at a level that was toxic to the cells. The presence of HAp particles at 0.50% w/v in the PLLA fibrous scaffolds not only promoted the attachment and the proliferation of MC3T3‐E1 mouse pre‐osteoblastic cells, but also increased the expression of osteocalcin mRNA and the extent of mineralization after the cells had been cultured on the scaffolds for 14 and 21 days, respectively. The results obtained suggested that the PLLA/HAp fibre mats could be materials of choice for bone tissue engineering. Copyright © 2009 Society of Chemical Industry     

Building spacetime meshes over arbitrary spatial domains

We present an algorithm to construct meshes suitable for spacetime discontinuous Galerkin finite-element methods. Our method generalizes and improves the Tent Pitcher algorithm of Üngör and Sheffer. Given an arbitrary simplicially meshed domain X of any dimension and a time interval [0, T], our algorithm builds a simplicial mesh of the spacetime domain X × [0, T], in constant time per element. Our algorithm avoids the limitations of previous methods by carefully adapting the durations of spacetime elements to the local quality and feature size of the underlying space mesh.This work was supported in part by The Center for Process Simulation and Design at the University of Illinois, Urbana-Champaign, under NSF ITR grant DMR-0121695. A preliminary version of this paper was presented at the 11th International Meshing Roundtable [9].     

Bacteriological survey of water and ice for general uses in Thailand

Bacteriological quality of water in Chanthaburi province in Thailand was assessed at monthly intervals throughout one year. Water supplies, public wells, bottling factories, reservoirs for rain water and an ice factory were examined. Plesiomonas shigelloides was detected from water supply samples and from well water. Shigella and Salmonella were detected from the treated water supply. Counts of coliform bacteria were above the limit in some cases.     

An Experimental Study of Sliver Exudation

We present results on a two-step improvement of mesh quality in three-dimensional Delaunay triangulations. The first step refines the triangulation by inserting sinks and eliminates tetrahedra with large circumradius over shortest edge length ratio. The second step assigns weights to the vertices to eliminate slivers. Our experimental findings provide evidence for the practical effectiveness of sliver exudation. ID="A1" Correspondence and offprint requests to: H. Edelsbrunner, Department of Computer Science, Duke University, Box 90129, Durham, NC, USA