Lead recovery from aqueous environment by using porous carbon of citrus fruits waste: equilibrium,kinetics and thermodynamic studies

ABSTRACT

The mixture of citrus fruits (orange, grapefruit, mandarin, and lemon) wastes was utilized to obtain high surface area activated carbon (AC) by H₃PO₄ activation. The production conditions were optimized and the optimum conditions were determined. The optimal-activated carbon (CFWAC) was characterized by various physicochemical techniques. CFWAC was also used as a sorbent for Pb (II) ions from water. Batch experiments were performed to explore the adsorption capacity and mechanism. The Langmuir isotherm and pseudo-second-order kinetic model showed good fitness to the experimental data. The maximum Pb (II) adsorption capacity of CFWAC was found to be 163.93 mg/g.     

Performance evaluation of a submerged membrane bioreactor for the treatment of brackish oil and natural gas field produced water

Produced water, which is co-produced during oil and gas manufacturing, represents one of the largest sources of oily wastewaters. Therefore, treatment of this produced water may improve the economic viability and lead to a new source of water for beneficial use. In this study a submerged hollow fiber membrane bioreactor (MBR) has been studied experimentally for the treatment of brackish oil and natural gas field produced water. This type of wastewater is also characterized with relatively moderate to high amount of salt, oil and total petroleum hydrocarbons (TPH). However, the bacteria which are growing in conventional activated sludge and MBR cannot survive at these strict conditions, therefore acclimation of the bacteria is of vital importance. The performance of the biological system, membrane permeability, the rate and extent of TPH biodegradability have been investigated under different sludge age and F/M ratios. The results obtained by gas chromatography analyses showed that the MBR system could be very effective in the removal of TPH from produced water and a significant improvement in the effluent quality was achieved.     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Viscous behavior of PS,PP, and ABS in terms of temperature and pressure‐dependent hole fraction

We have developed a zero‐shear viscous model in terms of temperature‐ and pressure‐dependent hole fraction computed from Simha‐Somcynsky Hole Theory. This model successfully interprets the viscosity data of PS, PP, and ABS as a function of hole fraction for a broad range of temperature and pressure. We have also introduced and discussed a new term: Viscoholibility; the derivative of logarithm of viscosity with respect to hole fraction. When the hole fraction takes highest available value, the viscoholibility approaches asymptotically to a constant value by which the viscosity changes linearly with the hole fraction. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fatty acid and 3‐hydroxy fatty acid composition of two Hypericum species from Turkey

The fatty acid compositions of flowering tops of Hypericum perforatum L. and Hypericum retusum Aucher (Guttiferae) were analyzed by gas chromatography and gas chromatography‐mass spectrometry. The major components were C16:0 (24.87%), C18:3 n‐3 (21.94%), 3‐OH‐C18:0 (18.46%) and 3‐OH‐C14:0 (14.22%) for H. perforatumL. and 3‐OH‐C14:0 (28.29%), C18:0 (16.47%) and C16:0 (14.17%) for H. retusum Aucher. Besides widespread plant fatty acids, 3‐hydroxy fatty acids, namely 3‐hydroxytetradecanoic acid (3‐OH‐C14:0) and 3‐hydroxyoctadecanoic acid (3‐OH‐C18:0) were also obtained.     

Empirical model representing microbial activity in a submerged MBR treating strength wastewater

An expression for representing the microbial activity of biomass in the submerged membrane bioreactor treatingwhey was developed by considering the ratio of inert chemical oxygen demand (COD) in the effluent to that in the influent (C₅/C₀) and the ratio of volatile suspended solids to the suspended solids (MLVSS/MLSS). Subsequently, two expressions for the effects of above parameters on the specific oxygen uptake rate were statistically determined using a mathematical model developed by the regression analysis technique, including either the power function or the exponential growth models.     

Comparison of experimental and theoretical residual stresses in welds: The issue of gauge volume

Welding residual stresses have an effect on many aspects of the integrity of structures but are normally one of the largest unknown stresses. Residual stresses are difficult to measure and to estimate theoretically but are often significant when compared with the service stresses on which they superimpose. High tensile residual stresses can lead to loss of performance in corrosion, fatigue and fracture.In this research, measurement of residual stresses by the neutron diffraction technique is compared to an analysis of a sample geometry by theoretical finite-element procedures. The results indicate good qualitative agreement. One of the key issues in this comparison relates to what is termed “gauge volume” in the measurement technologies and what might be described as a “calculation volume” in theoretical approaches.