Eradication of Barrett''s mucosa with argon plasma coagulation and acid suppression: immediate and mid term results

Microcapsules are used for the formulation of drug controlled release and drug targeting dosage forms. Encapsulated hydrophobic drugs are often applied as their solutions in plant oils. The uptake of the oils in the complex coacervate microcapsules can be improved by the addition of surfactants. In this study, soybean, olive and peanut oils were chosen as the representatives of plant oils. The well characterized complex coacervation of gelatin and acacia has been used to produce the microcapsules. The amount of encapsulated oil has been determined gravimetrically. The encapsulation of the oils was high (75-80%). When the surfactants with HLB values from 1.8 to 6.7 were used, the amount of encapsulated oil was high (65-85%). A significant decrease of the oil content in the microcapsules was found when Tween 61 with HLB = 9.6 had been added into the mixture. No oil was found inside the microcapsules from the coacervate emulsion mixture containing Tween 81 (HLB = 10) and Tween 80 (HLB = 15), respectively. The results of the experiment confirm the dependence of hydrophobic substance encapsulation on the HLB published recently for Squalan.     

Ischemic preconditioning prior to myocardial protection with cold blood cardioplegia in coronary surgery

OBJECTIVE: Encouraging results on myocardial preconditioning in experimental models of infarction, stunning or prolonged ischemia raise the question whether preconditioning techniques may enhance conventional cardioplegic protection used for routine coronary surgery. METHODS: A prospective clinical trial was conducted to investigate the effect of additional ischemic normothermic preconditioning prior to cardioplegic arrest applying cold blood cardioplegia in patients scheduled for routine coronary surgery (3 vessel disease, left ventricular ejection fraction > 50%). Two cross clamp periods of 5 min with the hearts beating in sinus rhythm were applied followed by 10 min of reperfusion, each (n = 7, group I). Inducing moderate hypothermia cold blood cardioplegia was delivered antegradely. In control groups, cold intermittent blood cardioplegia (n = 7, group II) was used alone. Coronary sinus effluents were analyzed for release of creatine kinase (CK), CK-MB, lactate, and troponin T at 1, 3, 6, 9, and 12 h. In addition, postoperative catecholamine requirements were monitored. RESULTS: The procedure was tolerated well, and no perioperative myocardial infarction in any of the groups studied occurred. Concentrations of lactate tended to be higher in group I, but this difference was not significant. In addition, no significant differences for concentrations of CK, CK-MB, and troponin T were found. Following ischemic preconditioning an increased dosage of dopamine was required within the first 12 h postoperatively (group I: 2.63 +/- 1.44 microg/kg/min, group II: 0.89 +/- 1.06 microg/kg/min). CONCLUSIONS: Combining ischemic preconditioning and cardioplegic protection with cold blood cardioplegia does not appear to ameliorate myocardial protection when compared to cardioplegic protection applying cold blood cardioplegia alone. Inversely, contractile function seemed to be impaired when applying this protocol of ischemic preconditioning.     

An Innovative Methodology for the Performance Evaluation of Coated Cemented Carbide Inserts in Milling of Inconel 718

The performance of cemented carbide inserts coated with various PVD-films in milling Inconel 718 is evaluated by innovative analytical and experimental methods. Three PVD films with different micro and macro structures were applied. The coatings’ strength properties were detected by nanoindentations and by impact tests at various temperatures. These results were considered in FEM calculations of the material removal process to determine the mechanical and thermal loadings of the cutting wedge. Employing this innovative methodology, it is possible to capture proactively the effect of the cutting conditions on tool wear, thus reducing the effort dedicated in traditional sequential cutting experimentation.     

Licence de brevet et partage du risque: Résultats de simulation

Annals of Telecommunications - Le partage du risque est une des raisons les plus souvent avancées pour expliquer les clauses financières des contrats de licence. Pour autant, aucune...     

The first measurement of an absolute surface concentration of reaction intermediates in ethylene hydrogenation

The first measurement of a turnover rate with respect to surface intermediate concentration in a high pressure heterogeneous catalytic reaction is reported. By using infrared-visible sum frequency generation to study the hydrogenation of ethylene on Pt(111), it was found that the surface concentration of -bonded ethylene, the key reaction intermediate, represented approximately 4% of a monolayer. Thus the absolute turnover rate per surface adsorbed ethylene molecule is 25 times faster than the rate measured per platinum atom. To explain these results, we propose a model of weakly adsorbed ethylene intermediates reacting on atop sites.     

Induction of chromosome shattering by ultraviolet irradiation and caffeine: comparison of whole-cell and partial-cell irradiation

Synchronized and asynchronously growing cells of a V79 sub-line of the Chinese hamster were either whole-cell irradiated ( gamma, 254 nm) or laser-UV-microirradiated ( gamma, 257 nm). Post-incubation with caffeine (1-2 mM) often resulted in chromosome shattering, which was a rare event in the absence of this compound. In experiments with caffeine, the following results were obtained. Shattering of all the chromosomes of a cell (generalized chromosome shattering, GCS) was induced by whole-cell irradiation at the first post-irradiation mitosis when the UV fluence exceeded a "threshold" value in the sensitive phases of the cell cycle (G1 and S). GCS was also induced by laser-UV-microirradiation of a small part of the nucleus in G1 or S whereas microirradiation of cytoplasm beside the nucleus was not effective. An upper limit of the UV fluence in the non-irradiated nuclear part due to scattering of the microbeam was experimentally obtained. This UV fluence was significantly below the threshold fluence necessary to induce GCS in whole-cell irradiation experiments. In other cells, partial nuclear irradiation resulted in shattering of a few chromosomes only, while the majority remained intact (partial chromosome shattering, PCS). G1/early S was the most sensitive phase for induction of GCS by whole-cell and partial nuclear irradiation. The frequency of PCS was observed to increase when partial nuclear irradiation was performed either at lower incident doses or at later stages of S. We suggest that PCS and GCS indicate 2 levels of chromosome damage which can be produced by the synergistic action of UV irradiation and caffeine. PCS may be restricted to microirradiated chromatin whereas GCS involves both irradiated and unirradiated chromosomes in the microirradiated nucleus.     

Perceived urban design qualities and affective experiences of walking

This study investigates associations between perceived micro-level urban design qualities, the affective experience of walking, and intention to walk specific routes in the neighbourhood. A total of 106 residents assessed on-site three routes planned for walking in semi-central neighbourhoods. In the prediction of the residents’ intention to choose to walk and intention to avoid walking the route, perceived urban design qualities were mediated by the affective experience of valence of the walk. The perceived complexity and aesthetic quality, upkeep and order, and the presence of well-maintained greenery, were identified as important. These perceived urban design qualities and affective experiences varied between the three routes, but also within the routes. It is proposed that understanding of site-specific affective experience of walking environments could serve as guidance for urban design practices.     

Properties and microstructure of copper-alloyed solid solution-strengthened ductile iron

Solid solution-strengthened ductile iron (DI) exhibits outstanding mechanical properties due to the high silicon content. The strengthening by silicon addition is limited since additions above 4.3?wt-% lead to embrittlement. For a further improvement of mechanical properties, other alloying elements need to be considered. In the present work, the effect of various copper additions on the microstructure and the mechanical properties of solid solution-strengthened DI were investigated. The results show that no appreciable strengthening can be achieved by copper addition without the formation of pearlite in the matrix. The pearlite content increases considerably for Cu-additions above 0.23?wt-% and is independent of the cooling rate for the cooling conditions analysed.     

The live cell irradiation and observation setup at SNAKE

We describe a new setup at the ion microprobe SNAKE (Superconducting Nanoscope for Applied nuclear (Kern-) physics Experiments) at the Munich 14 MV Tandem accelerator that facilitates both living cell irradiation with sub micrometer resolution and online optical imaging of the cells before and after irradiation by state of the art phase contrast and fluorescence microscopy. The cells are kept at standard cell growth conditions at 37 °C in cell culture medium. After irradiation it is possible to switch from single ion irradiation conditions to cell observation within 0.5 s. First experiments were performed targeting substructures of a cell nucleus that were tagged by TexasRed labeled nucleotides incorporated in the cellular DNA by 55 MeV single carbon ion irradiation. In addition we show first online sequences of short time kinetics of Mdc1 protein accumulation in the vicinity of double strand breaks after carbon ion irradiation.