Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Wear of graphite anodes during electrolysis of add sulphate solutions

Graphite electrodes were prepared by mixing calcined coke and coal tar pitch. They were pressed under 250 kg cm^–2 and heat treated up to 2800° C. Rectangles measuring 70 mm x 40 mm x 8 mm were anodically polarized under galvanostatic and potentiostatic conditions. Electrolyses were conducted at 10–50 mA cm^–2 for periods ranging from 10–120 hours in Na₂SO₄ solutions acidified with sulphuric acid to various pH values. The wear of graphite anodes increased with decreasing bath temperature, increasing acid concentration, decreasing pH of the electrolyte and increasing current density. A model is suggested which assumes that corrosion takes place via the formation of a lamellar crystal compound with the formula (C ₈ ⁰ O)(OH)₃HSO ₄ ^– ·2H₂SO₄.The compound is unstable at higher temperatures when corrosion is effected by oxidation of graphite by atomic oxygen. The formation of the carbon ions was found to be a necessary precondition for the formation of the complex.     

Corrosion protection of magnesium ZM 21 alloy with polyaniline–TiO2 composite containing coatings

A polyaniline–TiO₂ composite (PTC) was prepared by oxidative polymerization of aniline in phosphoric acid with ammonium persulphate, in the presence of TiO₂. The composite was characterized by spectroscopic methods. An acrylic paint containing the PTC was prepared and the coating formed on magnesium alloy was evaluated by electrochemical impedance spectroscopy after exposure to salt spray test for a period of 250 h. The coating containing the PTC was found to protect the magnesium alloy more efficiently than the coating containing polyaniline.     

Mechanical characterization and chemical resistances of cured unsaturated polyester resins modified with vinyl ester resins based on recycled poly(ethylene terephthalate)

Unsaturated polyester resin (UP) was prepared from glycolyzed oligomer of poly(ethylene terephthalate) (PET) waste based on diethylene glycol (DEG). New diacrylate and dimethacrylate vinyl ester resins prepared from glycolysis of PET with tetraethylene glycol were blended with UP to study the mechanical characteristics of the cured UP. The vinyl ester resins were used as crosslinking agents for unsaturated polyester resin diluted with styrene, using free‐radical initiator and accelerator. The mechanical properties of the cured UP resins were evaluated. The compressive properties of the cured UP/styrene resins in the presence of different vinyl ester concentrations were evaluated. Increasing the vinyl ester content led to a pronounced improvement in the compression strength. The chemical resistances of the cured resins were evaluated through hot water, solvents, acid, and alkali resistance measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3175–3182, 2007     

Our current understanding of lake ecosystem response to climate change: What have we really learned from the north temperate deep lakes?

Climatic change is recognized as an important factor capable of influencing the structural properties of aquatic ecosystems. Lake ecosystems are particularly sensitive to climate change. Several long time-series studies have shown close coupling between climate, lake thermal properties and individual organism physiology, population abundance, community structure, and food-web structure. Understanding the complex interplay between climate, hydrological variability, and ecosystem structure and functioning is essential to inform water resources risk assessment and fisheries management. The purpose of this paper is to present the current understanding of climate-induced changes on lake ecosystem phenology. We first review the ability of climate to modulate the interactions among lake hydrodynamics, chemical factors, and food-web structure in several north temperate deep lakes (e.g., Lake Washington, Lake Tahoe, Lake Constance, Lake Geneva, Lake Baikal, and Lake Zurich). Our aim is to assess long-term trends in the physical (e.g., temperature, timing of stratification, and duration of ice cover), chemical (e.g., nutrient concentrations), and biological (e.g., timing of the spring bloom, phytoplankton composition, and zooplankton abundance) characteristics of the lakes and to examine the signature of local weather conditions (e.g., air temperature and rainfall) and large-scale climatic variability (e.g., ENSO and PDO) on the lake physics, chemistry and biology. We also conducted modeling experiments to quantify the relative effect of climate change and nutrient loading on lake phenology. These modeling experiments focused on the relative changes to the major causal associations underlying plankton dynamics during the spring bloom and the summer stratified period. To further understand the importance of climate change on lakes, we propose two complementary directions of future research. First, additional research is needed to elucidate the wide array of in-lake processes that are likely to be affected by the climate change. Second, it is essential to examine the heterogeneity in responses among different water bodies. The rationale of this approach and its significance for dealing with the uncertainty that the climate signals cascade through lake ecosystems and shape abiotic variability and/or biotic responses have been recently advocated by several other synthesis papers.     

An analytical model for manufacturing service supply contracts

The practice of service-based manufacturing, utilized in various industries, particularly in electronics, pharmaceuticals, and automotive, is on the rise as it improves enterprise effectiveness in dynamic markets. The mutual responsibilities between the supplier(s) and user(s) of such services are spelled out in defined-time-horizon contracts. While such contracts define mutual obligations of both parties on a tactical/operational level, the long-term strategic objectives of the parties may be in conflict. This paper is focused on studying the dynamics of manufacturing service contracts. It investigates the factors affecting the shape of the negotiation space for such contracts and also the way the space should be navigated in response to changing market conditions. The paper presents an analytical framework developed to facilitate behavior analysis of the actors involved in the contract.     

Detailed Real-Time Urban 3D Reconstruction from Video

The paper presents a system for automatic, geo-registered, real-time 3D reconstruction from video of urban scenes. The system collects video streams, as well as GPS and inertia measurements in order to place the reconstructed models in geo-registered coordinates. It is designed using current state of the art real-time modules for all processing steps. It employs commodity graphics hardware and standard CPU’s to achieve real-time performance. We present the main considerations in designing the system and the steps of the processing pipeline. Our system extends existing algorithms to meet the robustness and variability necessary to operate out of the lab. To account for the large dynamic range of outdoor videos the processing pipeline estimates global camera gain changes in the feature tracking stage and efficiently compensates for these in stereo estimation without impacting the real-time performance. The required accuracy for many applications is achieved with a two-step stereo reconstruction process exploiting the redundancy across frames. We show results on real video sequences comprising hundreds of thousands of frames.     

Dependency-based security risk assessment for cyber-physical systems

A cyber-physical attack is a security breach in cyber space that impacts on the physical environment. The number and diversity of such attacks against Cyber-Physical Systems (CPSs) are increasing at impressive rates. In times of Industry 4.0 and Cyber-Physical Systems, providing security against cyber-physical attacks is a serious challenge which calls for cybersecurity risk assessment methods capable of investigating the tight interactions and interdependencies between the cyber and the physical components in such systems. However, existing risk assessment methods do not consider this specific characteristic of CPSs. In this paper, we propose a dependency-based, domain-agnostic cybersecurity risk assessment method that leverages a model of the CPS under study that captures dependencies among the system components. The proposed method identifies possible attack paths against critical components of a CPS by taking an attacker’s viewpoint and prioritizes these paths according to their risk to materialize, thus allowing the defenders to define efficient security controls. We illustrate the workings of the proposed method by applying it to a case study of a CPS in the energy domain, and we highlight the advantages that the proposed method offers when used to assess cybersecurity risks in CPSs.

     

Sequency Domain Signal Processing Using Complex Hadamard Transform

Signal processing can be performed in time domain as well as intransform domain. Frequency domain is perhaps the most widely used domain for transform domain signal processing. In this paper we analyze sequency domain (SD) signal processing as an alternate to the conventional frequency domain signal processing. We perform signal processing in sequency domain using conjugate-symmetric sequency-ordered complex Hadamard transform and compare the results with those of discrete Fourier transform. We observe that in comparison with frequency spectrum, spectral energy of sequency spectrum is spread over the entire spectrum. We performed signal and image denoising in SD and found that our designed SD filters effectively denoise the signals.