Properties of poly(ethylene terephthalate)–poly(ethylene naphthalene 2,6‐dicarboxylate) blends with montmorillonite clay

The production and properties of blends of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) with three modified clays are reported. Octadecylammonium chloride and maleic anhydride (MAH) are used to modify the surface of the montmorillonite–Na⁺ clay particles (clay–Na⁺) to produce clay–C18 and clay–MAH, respectively, before they are mixed with the PET/PEN system. The transesterification degree, hydrophobicity and the effect of the clays on the mechanical, rheological and thermal properties are analysed. The PET–PEN/clay–C18 system does not show any improvements in the mechanical properties, which is attributed to poor exfoliation. On the other hand, in the PET–PEN/clay–MAH blends, the modified clay restricts crystallization of the matrix, as evidenced in the low value of the crystallization enthalpy. The process‐induced PET–PEN transesterification reaction is affected by the clay particles. Clay–C18 induces the largest proportion of naphthalate–ethylene–terephthalate (NET) blocks, as opposed to clay–Na⁺ which renders the lowest proportion. The clay readily incorporates in the bulk polymer, but receding contact‐angle measurements reveal a small influence of the particles on the surface properties of the sample. The clay–Na⁺ blend shows a predominant solid‐like behaviour, as evidenced by the magnitude of the storage modulus in the low‐frequency range, which reflects a high entanglement density and a substantial degree of polymer–particle interactions. Copyright © 2005 Society of Chemical Industry     

Wavelength-switchable fiber laser using acoustic waves

We report a wavelength-switchable fiber ring laser that includes a Bragg grating-based acoustooptic superlattice modulator. Wavelength switching of the laser emission is achieved by controlling the peak reflectivity of the different reflection bands that appear on both sides of the Bragg wavelength when a longitudinal acoustic wave propagates along the grating.     

Optimization of the properties obtained by quenching in martensitic stainless steels X30-40Cr13 and X40-60CrMoV14

An experimental study of the effects produced by different parameters of the heat-quenching cycle permitted the optimization of the properties typical of these martensitic stainless steels: hardness and corrosion resistance. The results obtained demonstrate that the heating temperatures currently used in industrial quenching treatment of these steels should be modified.     

Analysis of an interferometric optical fibre detection technique applied to silicon vibrating sensors

A simple and accurate analysis of a single-mode optical fibre interferometric displacement detection technique is resented. This analysis is in good agreement with experimental measurements, and shows that angular alignment between the fibre and the sensor is the most critical parameter.     

The performance of foliage mass and crown radius models in forming the input of a forest reflectance model: A test on forest growth sample plots and Landsat 7 ETM+ images

Several published foliage mass and crown radius regression models were tested on the preparation of the input for the reflectance model of Kuusk and Nilson [Kuusk, A. and Nilson, T. (2000), A directional multispectral forest reflectance model. Remote Sensing of Environment, 72(2):244–252.] for 246 forest growth sample plots in Estonia. In each test, foliage mass and crown radius for trees in the sample plots were predicted with a particular pair of allometric regression models. The forest reflectance model was then run using the estimated foliage mass and crown radius values. Reflectance factors were simulated and compared with the reflectance values obtained from three atmospherically corrected Landsat 7 Enhanced Thematic Mapper (ETM+) scenes. The statistics of linear regression between the simulated and measured reflectance factors were used to assess the performance of foliage and crown radius models. The hypothesis was that the best allometric regression models should provide the best fit in reflectance. The strongest correlation between the simulated and measured reflectance factors was found in the short-wave infrared band (ETM + 5) for all the images. The highest R² = 0.71 was observed in Picea abies dominated stands. No excellent combination of foliage mass and crown radius functions was found, but the ranking based on determination coefficients showed that some linear crown radius models are not applicable to our data. Processing of raster images, reflectance measurement for small sample plots, usage of tree-species-specific fixed parameters (specific leaf area, etc.), and the ignored influence of phenology introduced additional variation into the relationships between simulated and measured reflectance factors. Further studies are needed, but these preliminary results demonstrate that the proposed method could serve as an effective way of testing the performance of foliage mass and canopy cover regressions.     

Land‐use dynamic discovery based on heterogeneous mobility sources

Nowadays, cities are the most relevant type of human settlement and their population has been endlessly growing for decades. At the same time, we are witnessing an explosion of digital data that capture many different aspects and details of city life. This allows detecting human mobility patterns in urban areas with more detail than ever before. In this context, based on the fusion of mobility data from different and heterogeneous sources, such as public transport, transport‐network connectivity and Online Social Networks, this study puts forward a novel approach to uncover the actual land use of a city. Unlike previous solutions, our work avoids a time‐invariant approach and it considers the temporal factor based on the assumption that urban areas are not used by citizens all the time in the same manner. We have tested our solution in two different cities showing high accuracy rates.     

Study of the kinetics of dissolution and preciptitation of complex carbides and their effect on martensitic transformation in corrosion-resistant steels

Conclusion Separation of martensitic transformation into several stages in martensitic corrosionresistant steels may be explained by a concentration gradient for carbon and carbide-forming elements in austenite as a result of precipitation of them during cooling.Spain. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 7–8, July, 1991.     

Study of operating variables in the transformation of aqueous ethanol into hydrocarbons on an HZSM‐5 zeolite

With the aim of determining the possibilities of directly upgrading the liquid obtained from carbohydrate fermentation, the effect of operating conditions (temperature, space time, water content in the feed) has been studied in the catalytic transformation of aqueous ethanol into hydrocarbons on an HZSM‐5 zeolite in an isothermal fixed bed reactor. Special attention has been paid to the effect of water content on the yield, product distribution and catalyst deactivation. Although deactivation by coke decreases as the water content is increased, this content must be limited at 450 °C and higher temperatures in order to avoid irreversible deactivation of the catalyst by dealumination. © 2002 Society of Chemical Industry