Macromolecular recognition by cyclodextrins. Interaction of cyclodextrins with polymethacrylamides bearing hydrophobic amino acid residues

The interaction of cyclodextrins (CDs) with poly(N-methacryloyltryptophan) (pMTrp) and with poly(N-methacryloylphenylalanine) (pMPhe) was investigated as a simple model system of macromolecular recognition of proteins. The association constants (K) for the model compounds, sodium salts of tryptophan and phenylalanine, are not so different (i.e. 43 and 16 M⁻¹ for α-CD, 59 and 69 M⁻¹ for β-CD, and 12 and 3 M⁻¹ for γ-CD, respectively). On the other hand, there is a significant difference in the apparent K values for pMTrp and pMPhe (i.e. the K values for pMPhe are considerably smaller than ca. 10 M⁻¹, whereas those for pMTrp are 30, 83, and 11 M⁻¹ for α-, β-, and γ-CDs, respectively). These observations indicate that a subtle difference in polymer side chains can be critical in macromolecular recognition.     

Improvement in thermal endurance of D-mannitol as phase-change material by impregnation into nanosized pores

This paper describes the control of the melting point and improvement of the thermal endurance of D-mannitol (melting point T_m = 440 K) as a phase-change material (PCM) by vacuum impregnation of the PCM into nanosized pores of porous SiO₂ grains. First, we examined the effects of the average pore size (D_P) of porous SiO₂ on T_m and latent heat (L) of PCM/SiO₂ composites. Second, we investigated the thermal endurance of the composites using constant temperature kinetics based on L of the PCM and composites. Third, we performed cyclic tests of melting and freezing on the composite to evaluate leakage of the PCM. Thermophysical properties of the samples were measured by differential scanning calorimetry, and the following results were obtained: (1) The impregnation ratio of the composites was 0.91–0.99; therefore, almost all pores were completely filled with the PCM. (2) T_m shifted to lower temperature with smaller D_P, reaching 413 K in case of the PCM/SiO₂ composite with a D_P of 11.6 nm (3) T_m was derived as a function of D_P from the Gibbs–Thomson equation taking into account the existence of a nonfreezing layer on the surface of the pore wall. (4) The duration of thermal degradation of the PCM/SiO₂ composite with D_P = 11.6 nm was three times longer than that of the pure PCM at a temperature that is 10 K more than each melting point. (5) The PCM/SiO₂ composite with D_P = 11.6 nm can use as a shape-stable PCM composite without leakage of PCM.     

Measurement invariance of the Gifted Rating Scales—School Form across five cultural groups.

This study examined measurement invariance of the Gifted Rating Scales—School Form (GRS–S) across the United States, Puerto Rico, China, South Korea, and Turkey, using multigroup confirmatory factor analysis. A total of 1,817 students were rated by 287 teachers using either translated versions of GRS–S or the original English GRS–S. Results indicate a similar factor structure for the GRS–S across the five locations; six factors with each of the 72 items equivalently loaded to the same latent variable across groups. The metric invariance test and the factor variance and covariance invariance tests reveal that the patterns of factor loadings and the factor variances and covariances are invariant across the five groups. Moreover, the scalar invariance test indicates that item means are equivalent across the groups. These results suggest that the GRS–S has intercultural utility and can be similarly interpreted. Implications and limitations of the present research for gifted identification are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Strong Surface‐Termination Effect on Electroresistance in Ferroelectric Tunnel Junctions

Tunnel electroresistance in ferroelectric tunnel junctions (FTJs) has attracted considerable interest, because of a promising application to nonvolatile memories. Development of ferroelectric thin‐film devices requires atomic‐scale band‐structure engineering based on depolarization‐field effects at interfaces. By using FTJs consisting of ultrathin layers of the prototypical ferroelectric BaTiO₃, it is demonstrated that the surface termination of the ferroelectric in contact with a simple‐metal electrode critically affects properties of electroresistance. BaTiO₃ barrier‐layers with TiO₂ or BaO terminations show opposing relationships between the polarization direction and the resistance state. The resistance‐switching ratio in the junctions can be remarkably enhanced up to 10⁵% at room temperature, by artificially controlling the fraction of BaO termination. These results are explained in terms of the termination dependence of the depolarization field that is generated by a dead layer and imperfect charge screening. The findings on the mechanism of tunnel electroresistance should lead to performance improvements in the devices based on nanoscale ferroelectrics.     

Current Pumping from Spin Dynamics

We show theoretically that charge and spin currents arise from spin dynamics in the presence of the spin–orbit interaction. The dominant calculation is the inverse spin Hall effect, namely the spin current pumped from precession of local spins is converted into the charge current by the spin–orbit interaction. The conversion mechanism is explained based on the conservation laws of charge and spin.     

A new desk-top encounter-type haptic device with an actively driven pen-tablet LCD panel

In conventional haptic devices for virtual reality (VR) systems, a user interacts with a scene by handling a tool (such as a pen) using a mechanical device (i.e. an end-effector-type haptic device). In the case that the device can ‘mimic’ a VR object, the user can interact directly with the VR object without the mechanical constraint of a device (i.e. an encounter-type haptic device). A new challenge of an encounter-type haptic device is displaying the visuals and haptic information simultaneously on a single device. We are proposing a new desk-top encounter-type haptic device with an actively driven pen-tablet LCD panel. The proposed device is capable of providing pseudo-3D visuals and haptic information on a single device. As the result, the system provides to the user a sense of interaction with a real object. To develop a proof-of-concept prototype, a compact parallel mechanism was developed and implemented. The aim of this research is to propose a new concept in haptic research. In this paper, the concept, the prototype, and some preliminary evaluation tests with the proposed system are presented.     

Depth profiling of carbon in silicon using the C(p, p′γ) reaction

An analytical method has been developed for the measurement of a carbon depth profile of the region a few tens of μm from the surface, using a ¹²C(p, p′γ) reaction. Measurements for a SiC sample coated with a silicon layer and a carbon-implanted silicon sample were performed using this method. Two charged particle detectors and two γ-ray detectors were utilized for the coincident detection of scattered protons and γ-rays from the first excited state (E_x = 4.4 MeV) of ¹²C. The measured depth profiles agree well with results obtained using a surface profiler and an Auger microprobe. These results demonstrate that this method is useful for the non-destructive analysis of carbon at depths of a few tens of μm from the surface.     

High-pressure viscosity prediction of di(2-ethylhexyl) phthalate and tricresyl phosphate binary mixtures using dielectric relaxation data

Dielectric permittivity and loss in di(2-ethylhexyl) phthalate and tricresyl phosphate binary mixtures were measured over a frequency range from 100 Hz to 1.5 MHz under high pressure. The mixtures showed single dielectric relaxation. The composite plots of the dielectric loss data showed one master curve and time–temperature–pressure superposition were applicable. The prediction of high-pressure viscosity was carried out from the change of dielectric relaxation time with temperature and pressure. The predicted results showed relatively good agreement with viscosity data obtained from a falling-sphere viscometer.     

Role of Heavy Meromyosin in Heat‐Induced Gelation in Low Ionic Strength Solution Containing l‐Histidine

The gelation of myosin has a very important role in meat products. We have already shown that myosin in low ionic strength solution containing l ‐histidine forms a transparent gel after heating. To clarify the mechanism of this unique gelation, we investigated the changes in the nature of myosin subfragments during heating in solutions with low and high ionic strengths with and without l ‐histidine. The hydrophobicity of myosin and heavy meromyosin (HMM) in low ionic strength solution containing l ‐histidine was lower than in high ionic strength solution. The SH contents of myosin and HMM in low ionic strength solution containing l ‐histidine did not change during the heating process, whereas in high ionic strength solution they decreased slightly. The heat‐induced globular masses of HMM in low ionic strength solution containing l ‐histidine were smaller than those in high ionic strength solution. These findings suggested that the polymerization of HMM molecules by heating was suppressed in low ionic strength solution containing l ‐histidine, resulting in formation of the unique gel.