Expanded gamut printing is an approach in color reproduction that expands the color gamut of conventional CMYK printing processes via the use of additional colorants, such as Orange, Green, and Violet inks. This study evaluates the ability of commercial color management software to create an accurate solution for an expanded gamut printing system. In this study, two printing processes were used, an Epson SureColor P9000 inkjet printer/proofer and an HP Indigo 7900 digital production press, both with 7-color expanded gamut ink sets. Software solutions from Alwan, CGS ORIS, ColorLogic, GMG Color, Heidelberg, and Kodak were evaluated. The systems were tested to see how well they could reproduce the colors in the entire PANTONE+ Solid Coated spot color library. It is shown that the solutions are able to reproduce 89% to 94% of the spot colors on the Epson P9000 inkjet printer and 77% to 87% of the library on the Indigo 7900, both to less than two CIEDE2000 (a typical tolerance in label and packaging work). The number of color patches in expanded gamut characterization test charts was noted, as this is still an area of proprietary, nonstandardized working practice. There are many different colorant combinations that can make the same color in expanded gamut printing. The ink build created by the different software solutions was studied, as it relates to press stability through appropriate choice of colorants. Pantone and Adobe provide everyday commercial tools for expanded color workflows. The study identified some issues with products from these companies that could confuse a less-skilled user in a busy production environment. The conclusion of the study is that expanded gamut solutions for spot color printing produce totally acceptable results for digital printing processes; expanded gamut printing is ready, here and now. The findings show that expanded gamut printing can replace cumbersome conventional spot color workflows creating considerable savings and advantages, especially for label and packaging printers. 相似文献
The samples of the series Co1+ySnyFe2- 2y- xCrxO4 ferrites with x = 0.0, 0.1, 0.2, 0.3, 0.4, 0.5 and y = 0.05, were prepared by the usual double sintering ceramic technique. The single- phase spinel structure of the samples was confirmed by using X- ray diffractometry technique. The lattice parameter ’a’ with an accuracy of ± 0.002 Å were determined using Bragg peaks of XRD pattern. The lattice parameter ’a’ decreases with concentration, x, which is due to the difference in the ionic radii of Cr3+ and Fe3+ ions. The X- ray intensity calculations were carried out in order to determine the possible cation distribution amongst tetrahedral (A) and octahedral [B] sites. The X- ray intensity calculations show Cr3+ ions occupying B site. The saturation magnetization, σs, and magneton number, nB (the saturation magnetization per formula unit), measured at 300 K determined from high field hysteresis loop technique decrease with increase in concentration, x, suggesting a decrease in ferrimagnetic behaviour. Thermal variation of low field a.c. susceptibility measurements from room temperature to about 800 K exhibits almost normal ferrimagnetic behaviour and the Curie temperature, TC determined from a.c. susceptibility data decreases with increase in x.
The processing of stepwise graded Si3N4/SiC ceramics by pressureless co-sintering is described. Here, SiC (high elastic modulus, high thermal expansion coefficient) forms the substrate and Si3N4 (low elastic modulus, low thermal expansion coefficient) forms the top contact surface, with a stepwise gradient in composition existing between the two over a depth of ∼1.7 mm. The resulting Si3N4 contact surface is fine-grained and dense, and it contains only 2 vol% yttrium aluminum garnet (YAG) additive. This graded ceramic shows resistance to cone-crack formation under Hertzian indentation, which is attributed to a combined effect of the elastic-modulus gradient and the compressive thermal-expansion-mismatch residual stress present at the contact surface. The presence of the residual stress is corroborated and quantified using Vickers indentation tests. The graded ceramic also possesses wear properties that are significantly improved compared with dense, monolithic Si3N4 containing 2 vol% YAG additive. The improved wear resistance is attributed solely to the large compressive stress present at the contact surface. A modification of the simple wear model by Lawn and co-workers is used to rationalize the wear results. Results from this work clearly show that the introduction of surface compressive residual stresses can significantly improve the wear resistance of polycrystalline ceramics, which may have important implications for the design of contact-damage-resistant ceramics. 相似文献
Economic dispatch is carried out at the energy control center to find out the optimal output of thermal generating units such that power balance criterion is met, unit operating limits are satisfied and the fuel cost is minimized. With growing environmental awareness and strict government regulations throughout the world, it has become essential to optimize not only the total fuel cost but also the harmful emissions, both, under static as well as dynamic conditions. The static environment economic dispatch finds the optimal output of generating units for a fixed load demand at a given time, while the dynamic environmental economic dispatch schedules the output of online generators with changing power demands over a certain time period (normally one day) so as to minimize these two conflicting objectives, simultaneously. In this paper, the price penalty factor approach is employed for simultaneous minimization of cost and emission. The generator ramp rate constraints, non-convex and discontinuous nature of cost function and the large number of generators in practical power plants, make this problem very difficult to solve. Here, a fuzzy ranking approach is employed to identify the solution which offers the best compromise between cost and emission objectives. 相似文献
In this work, a composite numerical scheme based on finite difference and Haar wavelets is proposed to solve time dependent coupled Burgers’ equation with appropriate initial and boundary conditions. Time derivative is discretized by forward difference and then quasilinearization technique is used to linearize the coupled Burgers’ equation. Space derivatives discretization with Haar wavelets leads to a system of linear equations and is solved using Matlab7.0. Convergence analysis of proposed scheme exhibits that the error bound is inversely proportional to the resolution level of the Haar wavelet. Finally, the adaptability of proposed scheme is demonstrated by numerical experiments and shows that the present composite scheme offers better accuracy in comparison with other existing numerical methods. 相似文献
The application of conventional observer designs for high-dimensional systems may not always be practical due to high computational requirements or the resulting observers being too sensitive to measurement noise. In order to address these issues, this paper presents two observer design techniques for state estimation of high-dimensional chemical processes. One technique is used for systems with inputs, whereas the other one is specifically geared towards systems that are not excited from the outside. Both of these observers are applicable to linear and with a modification to non-linear systems.The main idea behind the presented observer designs is that a reduced-order observer is implemented instead of a conventional state estimator. The motivation is that subspaces, which are close to being unobservable, cannot be correctly reconstructed in a realistic setting due to measurement noise and inaccuracies in the model. The presented approaches make use of this observation and only reconstruct the parts of the system where accurate state estimation is possible. The observer designs are illustrated on a 30-tray distillation column model. Additionally, it has been shown that the location of process measurements has a major effect on the performance of the presented reduced-order observers. 相似文献