4-Transitivity and 6-figures in some Moufang-Klingenberg planes

In this paper, the Moufang-Klingenberg plane over a local alternative ring R of dual numbers is studied. It is shown that its collineation group is transitive on quadrangles. It is therefore shown that the coordinatization of these Moufang-Klingenberg planes is independent of the choice of the coordinatization quadrangle. Also, the concept of 6-figures is extended to these Moufang-Klingenberg planes and it is shown that any 6-figure corresponds to only one inversible m ∈ R.     

Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Natural and artificial radioactivity levels of greenhouse soils and relations with soil properties

Journal of Radioanalytical and Nuclear Chemistry - In this study, natural (226Ra, 232Th, 40K) and artificial (137Cs) radionuclide activity concentration levels of 63 greenhouse soils collected from...     

Determination of radiological hazard parameters and radioactivity concentrations in bauxite samples: the case of the Sutlegen Mine Region (Antalya,Turkey)

Journal of Radioanalytical and Nuclear Chemistry - Iron phosphate glasses with melting temperatures of?~?1300 °C were developed to immobilize spent nuclear fuels. The...     

First-principles studies of the electronic structure and optical properties of AgBO<Subscript>3</Subscript> (B=Nb,Ta) in the paraelectric phase

The electronic energy-band structure, density of states (DOS), and optical properties of AgBO₃ in the paraelectric cubic phase have been studied by using density functional theory within the local density approximation for exchange-correlation for the first time. The band structure shows a band gap of 1.533 eV (AgNbO₃)and 1.537 eV (AgTaO₃)at (M-⌈)point in the Brillouin zone. The optical spectra of AgBO₃ in the photon energy range up to 30 eV are investigated under the scissor approximation. The real and imaginary parts of the dielectric function and — thus the optical constants such as reflectivity, absorption coefficient, electron energy-loss function, refractive index, and extinction coefficient — are calculated. We have also made some comparisons with related experimental and theoretical data that is available.      

Determination of lead, copper and manganese by graphite furnace atomic absorption spectrometry after separation/concentration using a water-soluble polymer

In this study, a water-soluble polymer, polyvinylpyrrolidinone (PVP) having chelating functionalities was used for the preconcentration and separation of traces of Pb, Cu, Ve and Mn prior to their determination by graphite furnace atomic absorption spectrometry. For this purpose, the sample and the PVP solutions were mixed and the metal bound polymer was precipitated by adding the mixture onto acetone. The precipitate was separated by decantation and dissolved with water. By increasing the ratio of the volumes of sample to water used in dissolving the precipitate, the analyte elements were concentrated as needed. The concentration of trace elements was determined using graphite furnace atomic absorption spectrometry. The analyte elements in matrix free aqueous solutions were quantitatively recovered. The validity of the proposed method was checked with a standard reference material (NIST SRM 1577b bovine liver) and spiked fruit juice, sea water and mineral water samples. The analytical results were found to be in good agreement with certified and added values. Detection limits (3δ) were 1.7, 3.6 and 4.1 μg l⁻¹ for Pb, Cu and Mn, respectively, using 10 μl of sample volume. The method is novel and can be characterized by rapidity, simplicity, quantitative recovery and high reproducibility.     

The strong solution of the Monge–Ampère equation on the Wiener space for log-concave densities

Let (W,H,μ) be an abstract Wiener space, assume that $\text{d}\text{ν=L}\text{d}\text{μ}$ is a second probability measures on $\text{(W,}\text{B}\text{(W))}$ such that $\text{L=}\text{1}\text{c}\text{exp}\text{?f}$, with $\text{f∈}\text{D}{}_{\mathrm{2,1}}$ lower bounded and H-convex. Let $\text{T=I}{}_{\mathrm{W}}\text{+??,}\text{?∈}\text{D}{}_{\mathrm{2,1}}$, be the solution of the Monge problem transporting μ to ν and realizing the H-Wasserstein distance between μ and ν. We prove that $\text{?∈}\text{D}{}_{\mathrm{2,2}}$ hence the Gaussian Jacobian $\text{Λ=}\text{det}{}_2\text{(I+?}{}^2\text{?)}\text{exp}\text{{}\text{L}\text{??1/2|??|}{}_{\mathrm{H}}{}^2\text{}}$ is well-defined and T is the strong solution of the Monge–Ampère equation ΛL°T=1 a.s. on W. To cite this article: D. Feyel, A.S. Üstünel, C. R. Acad. Sci. Paris, Ser. I 339 (2004).     

Determination of lead and nickel in Apple-Leaves and sea-water by electrothermal atomic absorption spectrometry after solid-phase extraction using Chromosorb-107 filled in a syringe

Lead and nickel were concentrated and separated after sorbing on Chromosorb-107 filled in a syringe prior to their determination by electrothermal atomic absorption spectrometry. To retain the analytes, the sample solution treated with or without ammonium pyrolidine dithiocarbamate (APDC) was drawn into the syringe filled with Chromosorb-107 and discharged back manually. Then the analyte elements were eluted by drawing and discharging the suitable eluent. The optimum experimental conditions for quantitative recoveries of analytes (amount of sorbent, pH of sample, concentration and kind of eluent, flow rates of sample and eluent and adding of the effect of complexing agent) were investigated. Nickel was quantitatively retained at pH6 irrespective of whether it was complexed with APDC while the quantitative sorption of lead was achieved at pH8 only if it was treated with APDC prior to passing through the sorbent. The lead and nickel retained on the sorbent were eluted drawing and discharging 4.5 M HNO(3), respectively. If the concentration of analyte elements in the sample were too low to be detected, then they were concentrated by increasing the ratio of sample value to eluent volume as needed. The lead and nickel in spiked sea-water samples and in certified reference Apple-Leaves (NIST SRM 1515) standards were quantitatively (95%) recovered with R.S.D. of around +/-2%.