Mass and isotopic concentrations of water-insoluble refractory carbon in total suspended particulates at Mt.Waliguan Observatory(China)

Mass concentration and isotopic values δ¹³C and ¹⁴C are presented for the water-insoluble refractory carbon（WIRC） component of total suspended particulates（TSP）,collected weekly during 2003,as well as from October 2005 to May 2006 at the WMO-GAW Mt.Waliguan（WLG） site.The overall average WIRC mass concentration was（1183±120）ng/m³（n = 79）,while seasonal averages were 2081 ±1707（spring）,454±205（summer）,650±411（autumn）,and 1019±703（winter） ng/m3.Seasonal variations in WIRC mass concentrations were consistent with black carbon measurements from an aethalometer,although WIRC concentrations were typically higher,especially in winter and spring.The δ¹³C PDB value（-25.3 ± 0.8）%.determined for WIRC suggests that its sources are C₃ biomass or fossil fuel combustion.No seasonal change in δ¹³C PDB was evident.The average percent Modern Carbon（pMC） for ¹⁴C in WIRC for winter and spring was（67.2 ± 7.7）%（n = 29）.Lower pMC values were associated with air masses transported from the area east of WLG,while higher pMC values were associated with air masses from the Tibetan Plateau,southwest of WLG.Elevated pMC values with abnormally high mass concentrations of TSP and WIRC were measured during a dust storm event.     

Polyvinylpyrrolidone and graphene-modified hematite nanoparticles for efficient electrocatalytic oxidation of p-nitrophenol

Journal of Solid State Electrochemistry - Polyvinylpyrrolidone (PVP) and graphene (G)-modified iron oxides (Fe2O3-PVP-G) are prepared by a simple hydrothermal reaction. Their morphology and...     

静磁场伴随有静电场存在

阐述检测物体是否产生了电场的方法；通过实际检测证实立方体永磁体既产生了负静电场，也产生了正静电场，并测定了具体的场强．     

Single-Molecule single crystals of isotactic polystyrene

Single-molecule single crystals were grown from amorphous droplets of fractionated isotactic polystyrene. The crystals were analyzed by electron microscopy and electron diffraction. The molecular mass distribution could be matched with a statistical analysis of single-molecule particles (amorphous and crystals). Proof was brought that single molecules of isotactic polystyrene do not reach equilibrium dimensions on crystallization, rather assume the lamellar morphology with chain-folded macroconformation, also known from crystallization of polymolecular crystals. © 1994 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America. US Government contract No. DE-AC05-840R-21400.

     

A novel process for anaerobic composting of municipal solid waste

A novel process has been developed and evaluated in a pilotscale program for conversion of the biodegradable fraction of municipal solid waste (MSW) to methane via anaerobic composting. The sequential batch anaerobic composting (SEBAC) process employs leachate management to provide organisms, moisture, and nutrients required for rapid conversion of MSW and removal of inhibitory fermentation products during start-up. The biodegradable organic materials are converted to methane and carbon dioxide in 21–42 d, rather than the years required in landfills.     

Unveiling the importance of reactant mass transfer in environmental catalysis: Taking catalytic chlorobenzene oxidation as an example

To date, investigations onto the regulation of reactants mass transfer has been paid much less attention in environmental catalysis. Herein, we demonstrated that by rationally designing the adsorption sites of multi-reactants, the pollutant destruction efficiency, product selectivity, reaction stability and secondary pollution have been all affected in the catalytic chlorobenzene oxidation (CBCO). Experimental results revealed that the co-adsorption of chlorobenzene (CB) and gaseous O₂ at the oxygen vacancies of CeO₂ led to remarkably high CO₂ generation, owning to their short mass transfer distance on the catalyst surface, while their separated adsorptions at Brönsted HZSM-5 and CeO₂ vacancies resulted in a much lower CO₂ generation, and produced significant polychlorinated byproducts in the off-gas. However, this separated adsorption model yielded superior long-term stability for the CeO₂/HZSM-5 catalyst, owning to the protection of CeO₂ oxygen vacancies from Cl poisoning by the preferential adsorption of CB on the Brönsted acidic sites. This work unveils that design of environmental catalysts needs to consider both of the catalyst intrinsic property and reactant mass transfer; investigations of the latter could pave a new way for the development of highly efficient catalysts towards environmental pollution control.     

低β 162.5 MHz taper型HWR腔的机械性能分析（英文）

北京大学正在设计β=0.09,频率为162.5 MHz taper型的二分之一波长射频超导谐振腔(HWR腔),这种腔针对高流强质子束(约100mA)和氘束(约50mA)的加速而设计。对于这种超导腔而言机械性能分析是十分重要的,可以通过机械性能分析来估计由于腔体的形变带来的频率偏移。用ANSYS分析了由于液氦压力不稳定造成的麦克风效应以及洛伦兹力造成的腔体失谐,并且对沿腔体轴线方向的调谐进行了分析。模拟结果显示这只腔压力敏感系数为31.1 Hz/kPa,洛伦兹力系数为-0.41Hz/(MV·m~(-1))~2。腔体的调谐范围达到±177kHz,足够补偿腔体可能的频率偏移。腔体的机械性能满足腔体正常运行的要求。     

Fast switching beam steering based on ferroelectric liquid crystal phase shutter and polarisation grating

We report on fast-switching and high-efficient optical beam steering based on a polymerisable liquid crystal polarisation grating (PG) in combination with ferroelectric liquid crystal (FLC) phase shutter. The PG was fabricated in a convenient single-step holographic exposure process using photo-sensitive azo-dye material as alignment layer for liquid crystal (LC) director. A binary electro-optical FLC was employed for circular polarisation selection, which enables the electro-tunable steering of the combined system. The efficiency of 95.7% with 82 μs switching time is obtained for 1064 nm laser. This work provides a versatile candidate for non-mechanical beam steering devices.     

Modified reverse microemulsion synthesis for iron oxide/silica core–shell colloidal particles

Iron oxide/silica core–shell colloidal particles were prepared by basic reverse microemulsion (RM) method and two modified RM methods. By basic RM method, maximum particle size obtained was mere 40 nm. For building photonic crystals working in the visible range, the colloidal particles must be larger than 100 nm. Thus two modified RM methods were used. By alcohol modified RM method, short chain alcohols were used as co-surfactant. The particle size rose to near 100 nm, but the core–shell structure was comparatively poor. By emulsifier pair modified RM method, the particle size leapt to over 200 nm and a narrow growth window was found favorable to enhance the stability and rigidity of the surfactants layers. The core–shell mechanism was also discussed and a new four-step mechanism was proposed.