Controlling a bunch of multiple filaments by means of a beam diameter

We demonstrate a three orders of magnitude increase and stability in the backscattered fluorescence signal from nitrogen molecules by terawatt femtosecond laser pulse induced air filaments using a new method. The method is based on squeezing the initial beam diameter using a telescope. The effect of laser shot-to-shot fluctuations was included in numerical simulations by a random distribution of the initial intensity in both squeezed and non-squeezed beams. Statistical processing of the simulation results shows that the average diameter of plasma channels as well as the total amount of free electrons generated in a bunch of multiple filaments in air is larger in the squeezed beam. Shot-to-shot stability of the simulated plasma density increases in the squeezed beam. The change of this plasma density with propagation distance is in good qualitative agreement with the change of the range-corrected nitrogen fluorescence signal with distance. PACS 42.65.Jx; 42.60.Jf; 42.68.Ay; 42.68.Wt     

Dielectrophoretic force on a sphere near a planar boundary

The small gap distance separating a spherical colloidal particle in electrophoretic motion from a planar nonconducting surface is a required parameter for calculating its electrophoretic mobility. In the presence of an externally applied electric field, this gap distance is determined by balancing the van der Waals, electrical double layer interaction, and gravitational forces with a dielectrophoretic (DEP) force. Here, the DEP force was determined analytically by integration of the Maxwell stress over the surface of the particle. The account of this force showed that its previous omission from the analysis always resulted in underpredicted gap distances. Furthermore, the DEP force dominated under conditions of low particle density or high electric field strength and led to much higher gap distances on the order of a few microns. In one particular case, a combination of low particle density and small particle size produced two possible equilibrium gap distances for the particle. However, the particle was unstable in the second equilibrium position when subjected to small perturbations. In general, larger particles had smaller gap sizes. The effects of four other parameters on gap distance were studied, and gap distances were found to increase with lower particle density, higher electric field strength, higher particle and wall zeta potentials, and lower Hamaker constants. Retardation effects on van der Waals attraction were considered.     

Excited-state electron-transfer quenching by a series of water photoreduction mediators

Rate constants k_q for the quenching of the excited state of Ru(bipy)₃²⁺ by a series of viologen salts having different redox potential E_{$\text{1}\text{2}$} have been determined in deaerated aqueous solutions at pH = 5 by laser flash photolysis. The k_q values are found to decrease with increasing —E_{$\text{1}\text{2}$} and to correlate with the reaction free-energy change ΔG. Such a correlation is shown to be consistent with the Rehm—Weller model for electron-transfer reactions.     

Hydrogen activation on Mo-based sulfide catalysts,a periodic DFT study

Hydrogen adsorption on Mo[bond]S, Co[bond]Mo[bond]S, and Ni[bond]Mo[bond]S (10 1 macro 0) surfaces has been modeled by means of periodic DFT calculations taking into account the gaseous surrounding of these catalysts in working conditions. On the stable Mo[bond]S surface, only six-fold coordinated Mo cations are present, whereas substitution by Co or Ni leads to the creation of stable coordinatively unsaturated sites. On the stable MoS(2) surface, hydrogen dissociation is always endothermic and presents a high activation barrier. On Co[bond]Mo[bond]S surfaces, the ability to dissociate H(2) depends on the nature of the metal atom and the sulfur coordination environment. As an adsorption center, Co strongly favors molecular hydrogen activation as compared to the Mo atoms. Co also increases the ability of its sulfur atom ligands to bind hydrogen. Investigation of surface acidity using ammonia as a probe molecule confirms the crucial role of sulfur basicity on hydrogen activation on these surfaces. As a result, Co[bond]Mo[bond]S surfaces present Co[bond]S sites for which the dissociation of hydrogen is exothermic and weakly activated. On Ni[bond]Mo[bond]S surfaces, Ni[bond]S pairs are not stable and do not provide for an efficient way for hydrogen activation. These theoretical results are in good agreement with recent experimental studies of H(2)[bond]D(2) exchange reactions.     

Convexity preserving interpolation by algebraic curves and surfaces

The problem of interpolation by a convex curve to the vertices of a convex polygon is considered. A natural 1-parameter family ofC algebraic curves solving this problem is presented. This is extended to a solution, of a general Hermite-type problem, in, which the curve also interpolates to one or two prescribedtangents at any desired vertices of the polygon. The construction of these curves is a generalization of well known methods for generatingconic sections. Several properties of this family of algebraic curves are discussed. In addition, the method is generalized to convexC interpolation of strictly convex data sets inR ³ by algebraicsurfaces.     

FDA Quality assurance for radioactivity in foods and radiopharmaceuticals

Summary The Food and Drug Administration (FDA) has regulatory responsibility for radionuclides in foods and radiopharmaceuticals and must maintain an ongoing Quality Assurance Program. These Quality Control Programs involve the U.S. Environmental Protection Agency (EPA) [1, 2] and the National Institute of Standards and Technology (NIST) [3], who supply the necessary reference materials and standards to ensure that the measurements are accurate and reproduceable. Data from EPA (1987 to 1991) and from a NIST Blind Source study (1985 to 1991) show the results are accurate with an average variation from NIST values of 1.8% [4–10]. The use of standard materials with the same matrices as the samples being analyzed provides credibility to the measurements.     

Detailed analysis of α,ω-bis(4-hydroxybutyl) poly(dimethylsiloxane) using GPC-MALDI TOF mass spectrometry

In this study the prepolymer alpha,omega-bis(4-hydroxybutyl) poly(dimethylsiloxane), used in the formulation of oxygen permeable films, is evaluated by gel permeation chromatography (GPC) combined with matrix assisted laser desorption ionization (MALDI) time of flight (TOF) mass spectrometry (MS). Two unexpected mass distributions are observed in the mass spectra. Reaction schemes for the formation of these distributions are proposed. A solution phase trimethylsilane end group modification was performed on the prepolymer to determine whether the unexpected mass distributions occur as impurities from synthesis or as artifacts from the MS process. Evaluation of the TMS modified prepolymer indicates the unexpected mass distributions indeed occur as impurities from the synthetic procedure. Average molecular weight values are determined by traditional GPC, direct MALDI-TOF MS, and GPC-MALDI-TOF MS methods and the results are compared.     

Scandium-catalyzed allylboration of aldehydes as a practical method for highly diastereo- and enantioselective construction of homoallylic alcohols

A general approach for the allylation of aldehydes using stable, air-tolerant camphor-based chiral allylboronates under Sc(OTf)3 catalysis is described. This practical methodology provides both syn and anti propionate units and other homoallylic alcohols with very high levels of diastereo- and enantioselectivity for several substrates, including functionalized aliphatic aldehydes useful toward the elaboration of complex natural products.     

Gas-liquid chromatographic method for the measurement of plasma levels of d-7,8-dimethoxy-3-methyl-phenyl-2,3,4,5-tetrahydro-1h-3-benzazepine acid maleate (SCH-12679) and its major metabolites in aggressive mental retardites

A sensitive gas-liquid chromatographic technique for the quantitative analysis of SCH-12679 (d-7,8-dimethoxy-3-methyl-phenyl-2,3,4,5-tetrahydro-1H-3-benzazepine acid maleate) and its major metabolites in plasma of aggressive mental retardates receiving therapeutic doses of the medicament has been developed. The lower limits of detection are 20 ng/ml for SCH-12679, 0.5 ng/ml for 3-desmethyl SCH-12679 and 0.4 ng/ml for 7-desmethyl plus 8-desmethyl SCH-12679. SCH-12679 is estimated with a flame ionization detector. Its metabolites are quantitated using an electron-capture detector after conversion of the compounds to their heptafluorobutyryl derivatives by reaction with the appropriate anhydride. Data on plasma levels of unchanged SCH-12679, 3-desmethyl SCH-12679 and a combination of 7-desmethyl and 8-desmethyl SCH-12679 in fifteen patients treated with the medicament are presented.     

Heavier alkali-metal monosulfides (KS, RbS, CsS, and FrS) and their cations

The heavier alkali-metal monosulfides (KS, RbS, CsS, and FrS) have been studied by high-level ab initio calculations. The RCCSD(T) method has been employed, combined with large flexible valence basis sets. All-electron basis sets are used for potassium and sulfur, with effective core potentials being used for the other metals, describing the core electrons. Potential-energy curves are calculated for the lowest two neutral and cationic states: all neutral monosulfide species have a (2)Pi ground state, in contrast with the alkali-metal monoxide species, which undergo a change in the electronic ground state from (2)Pi to (2)Sigma(+) as the group is descended. In the cases of KS, RbS, and CsS, spin-orbit curves are also calculated. We also calculate potential-energy curves for the lowest (3)Sigma(-) and (3)Pi states of the cations. From the potential-energy curves, spectroscopic constants are derived, and for KS the spectroscopic results are compared to experimental spectroscopic values. Ionization energies, dissociation energies, and heats of formation are also calculated; for KS, we explore the effects of relativity and basis set extrapolation on these values.