排序方式: 共有57条查询结果,搜索用时 15 毫秒
1.
高抗冲聚丙烯序列结构的综合表征 总被引:3,自引:0,他引:3
用高分辨^13C NMR、FTIR等手段获得了高抗冲聚丙烯的组成和序列分布等链结构方面的信息。用DSC、WAXD等方法研究了它们的结晶行为、熔融转变及晶体结构,多种方法相结合有效地表征了高抗冲聚丙烯的序列结构。 相似文献
2.
聚己内酯与不同纤维素衍生物形成的共混体系的红外光谱研究 总被引:1,自引:0,他引:1
用傅里叶变换红外光谱研究了聚己内酯与硝基纤维素、乙基纤维素和纤维素氨基甲酸酯所形成的共混体系中组分间的相互作用。对羟基基团、羰基基团以及聚己内酯结晶相相关的吸收谱带分析表明 :随着纤维素结构单元上羟基被取代程度的增加 ,纤维素衍生物的自身氢键相互作用明显减弱 ,而与聚己内酯之间的相互作用得到加强。这种相互作用的加强 ,显著改变了聚己内酯的结晶行为 ,使其结晶能力减弱。 相似文献
3.
Polyethylene terephthalate(PET)/polycaprolactone(PCL) segmented copolymers with different hard segment contents and a blend of two of them were studied by using DSC, WAXS, TEM and IR techniques and dynamic mechanical, stress-strain and isothermal crystallization measurements. Emphasis was laid on the studies of influence of compositional heterogeneity on the morphology and properties of these segmented copolymers. It was found that the solution cast specimens of the more heterogeneous sample exhibit better segregation of segments, high crystallinity and melting temperature. They have higher thermal stability of mechanical properties at small deformations. However, they are less stable against large deformations and may become softer than the more homogeneous ones. 相似文献
4.
5.
6.
7.
A series of PCL/MDI/BDO segmented polyurethanes have been synthesized by two-step method in solution.The hard segment content ranges from 10% to 48% by weight, and the molecular weight of PCL diols is 1500. Hard segment spherulites have been observed in compression molded specimens of all of the samples except the one of the lowest hard segment content. The difficulty in sphernlite formation was explained as only in a small temperature range,the microphase separation rate may be faster than the crystallization rate and all these processes are very slow due to the hydrogen bonding between hard and soft segments and the interactions between hard segments themselves. PCL soft segments of molecular weight 1500 is still crystallizable and may form different crystalline superstructures. 相似文献
8.
不同软段结构聚氨酯-酰亚胺嵌段共聚物的合成及热性能研究 总被引:4,自引:2,他引:4
用二步法合成了不同软段 (PPO ,PEG ,PEPA)聚氨酯 酰亚胺 (PUI)嵌段共聚物 ,FTIR光谱表征了所有合成PUI分子主链均含有酰亚胺链段 ,并研究了PUI嵌段共聚物的热性能受软段类型及长度的影响 .DSC研究表明聚酯型PUI的软硬段之间的相容性比聚醚型PUI好 ,随相同软段分子量的增加 ,PUI体系的软硬段兼容性变差 ,并显示了相分离的特征 ;热失重 (TGA)研究得出不同软段的PUI样品的热稳定性大小顺序为 :PEPA PUI >PEG PUI>PPO PUI ;动态力学 (DMTA)研究给出了所合成的PUI样品在 5 0~ 2 0 0℃范围内均出现了较长的模量平台显示出有较好的耐热性 ,且随硬段含量的升高其储能模量不断增强 相似文献
9.
丙烯酸乙酯60Co辐照下形成的过氧化物及其引发活性 总被引:2,自引:0,他引:2
聚己内酯(PCL)中加入与其有一定混溶性的非晶组分乙基纤维素(EC),可明显影响其长环带状晶的行为,表明具有低湿溶性及某种分子间相互作用的二元共混体系PCL/EC仍能在一定温度范围内形成环带球晶;良好的混溶性,强的分子间相互作用并非是一二元共混体系中PLC长环带球晶不可缺少的因素。通过偏光显微镜发现PCL的加入有利于乙基纤维素/二氯乙酸溶液中液晶相的形成,用Flory关于棒状分子-无规线团-溶剂三 相似文献
10.
高分辨1H-NMR研究溶聚丁苯橡胶链化学结构 总被引:1,自引:0,他引:1
用高分辨 1H NMR研究了不同溶聚丁苯橡胶链化学结构的特征 ,并对其中的化学组成特别是丁二烯异构体含量进行了定量计算 .揭示了轮胎工业中公认性能优良的拜尔溶聚丁苯橡胶具有较高的cis 1,4丁二烯异构体含量 ,而trans 1,4丁二烯异构体含量较低 ,1,2add丁二烯异构体含量和苯乙烯含量比较适中 ,而且丁二烯异构体具有一定的序列有序性 .正是这些结构因素 ,决定了拜尔溶聚丁苯橡胶能够对绿色轮胎低生热、抗湿滑和耐磨性能起到了最佳平衡作用 相似文献