Physicochemical parameters aid microbial community? A case study from marine recreational beaches,Southern India

A total of 176 (water and sediment) samples from 22 stations belonging to four different (urban, semi-urban, rural, and holy places) human habitations of Tamil Nadu beaches were collected and analyzed for physiochemical and microbial parameters during 2008–2009. Bacterial counts were two- to tenfold higher in sediments than in water due to strong bacterial aggregations by dynamic flocculation and rich organic content. The elevated bacterial communities during the monsoon explain rainfalls and several other wastes from inlands. Coliform counts drastically increased at holy and urban places due to pilgrimage and other ritual activities. Higher values of the pollution index (PI) ratio (>1) reveals, human fecal pollutions affect the water quality. The averaged PI ratio shows a substantial higher microbial contamination in holy places than in urban areas and the order of decreasing PI ratios observed were: holy places?>?urban areas?>?semi-urban areas?>?rural areas. Correlation and factor analysis proves microbial communities were not related to physicochemical parameters. Principal component analysis indicates 55.32 % of the total variance resulted from human/animal fecal matters and sewage contaminants whereas 19.95 % were related to organic contents and waste materials from the rivers. More than 80 % of the samples showed a higher fecal coliform and Streptococci by crossing the World Health Organization's permissible limits.     

Scleropyrum pentandrum (Dennst.) mabb—oil as a feedstock for biodiesel production—engine performance and emission studies

A feasibility study on utilization of non edible oil of Scleropyrum pentandrum was carried out to see its potential as a new source for biodiesel production. Nonedible oil seeds of Scleropyrum pentandrum have oil content of 55–60%. Transesterification of freshly extracted oil in the presence of anhydrous sodium hydroxide at a concentration 1% (w/v oil) and methanol-oil ratio of 40% (v/v oil) yields 90.8% methyl esters under conventional heating. Month old oil requires sulfuric acid pretreatment (esterification) before transesterification. The transesterified oil has a density 889–893 kg/m³; kinematic viscosity of 4.21–5.7 mm²/s; cetane index 46.03; pour point of ?15°C and gross calorific value of 40.135 MJ/kg and oxidative stability of 2.35 hours. The properties are well within the Indian, European and American standard limits recommended for biodiesel except the oxidation stability, which can be improved by adding antioxidant additives. The engine performance studies of B10 and B20 blends of Scleropyrum pentandrum biodiesel (SP biodiesel) with statistical inference confirmed that it can be used as a fuel in CI engines without any engine modifications. The engine exhaust emission analysis showed that the emission of hydrocarbons can be minimized by at least 15–20%, CO emission by 15%, smoke opacity by 10–12% and moderately lesser CO₂ and NOx emissions.     

Investigation of performance enhancement of solar still incorporated with Gallus gallus domesticus cascara as sensible heat storage material

In this research work, the conventional single slope still (CSS) with egg shells of breed Gallus gallus domesticus cascara as sensible heat storage (SHS) material are studied experimentally to enhance the yield. In this experimental investigation, the proposed single slope still (PSS) with SHS material was made in comparison with the CSS to evaluate the productivity of fresh water under the same ambient conditions. Comparatively, this PSS has higher thermal conductivity than the CSS. The yield obtained from the PSS is 2.46 L/m², while the yield from the CSS is 2.07 L/m². The average rate at which the rise of output fresh water obtained from the PSS is 18% more than the fresh water output obtained from the CSS. The daily energy efficiency of the PSS is 26.07%, and for the CSS, it is only 22.25%. The daily exergy efficiency of the PSS is 2.36%, and for the CSS, it is only 1.67%. Since using the egg shell will employ as organic waste management and modification in this still is economical, less initial, and maintenance cost.

     

Influence of the effect of nanoparticle additives blended with mahua methyl ester on performance,combustion, and emission characteristics of CRDI diesel engine

Environmental Science and Pollution Research - This research work aims to investigate the effect of fuel-borne additives when added to mahua methyl ester (MME) blend operated on common rail direct...     

Experimental investigation on engine performances,combustion characteristics and emission of exhaust gases of VCR engine fuelled with cottonseed oil methyl ester blended with diesel

This research work investigates the engine performances, combustion characteristics, and emission of exhaust gases of variable compression ratio engine fuelled with cottonseed oil methyl ester (COME) and diesel at different blends. The analysis showed that heat release rate and cylinder pressure is higher for diesel than COME blends. Higher BTE is obtained at the maximum load condition. The higher BTE and lower SFC are obtained for blend B15 as 42.17% and 0.2 kg/kW-hr at brake mean effective pressure (BMEP) of 4.64 bar. Also it is found that the peak cylinder gas pressure and combustion duration increases when the BMEP increases. At the BMEP of 3.51 bar, higher HRR is observed as 18.12 J/deg. Increase in HRR is obtained as 6.07% for B30 at BMEP of 4.64 bar when compared to diesel. Ignition delay decreased by 13.16% for B100, by the increment of blend proportions when compared to diesel, at BMEP of 4.64 bar. Lower smoke, HC and CO emissions are observed when increasing the blend proportions, whereas the nitric oxide emissions increases due to the better combustion resulted in higher temperatures. At BMEP of 4.64 bar, the CO emissions are reduced to 25.24% for neat biodiesel when compared with the diesel.     

Sewage treatment by vermifiltration with synchronous treatment of sludge by earthworms: a low-cost sustainable technology over conventional systems with potential for decentralization

Earthworms’ body works as a ‘biofilter’ and they have been found to remove the 5 days’ BOD (BOD₅) by over 90%, COD by 80–90%, total dissolved solids (TDS) by 90–92%, and the total suspended solids (TSS) by 90–95% from wastewater by the general mechanism of ‘ingestion’ and biodegradation of organic wastes, heavy metals, and solids from wastewater and also by their ‘absorption’ through body walls. Earthworms increase the hydraulic conductivity and natural aeration by granulating the clay particles. They also grind the silt and sand particles, increasing the total specific surface area, which enhances the ability to ‘adsorb’ the organics and inorganic from the wastewater. Intensification of soil processes and aeration by the earthworms enable the soil stabilization and filtration system to become effective and smaller in size. Suspended solids are trapped on top of the vermifilter and processed by earthworms and fed to the soil microbes immobilized in the vermifilter. There is no sludge formation in the process which requires additional expenditure on landfill disposal. This is also an odor-free process and the resulting vermifiltered water is clean and disinfected enough to be reused for farm irrigation and in parks and gardens G. Bharambe—GU & Research Assistant (Under Rajiv K. Sinha), U. Chaudhari—GU (Worked on vermiculture project).     

Converting wasteland into wonderland by earthworms—a low-cost nature’s technology for soil remediation: a case study of vermiremediation of PAHs contaminated soil

Earthworms in general are tolerant to many chemical contaminants including heavy metals and organic pollutants in soil and can bio-accumulate them in their tissues. Earthworms species like Eisenia fetida, Eisenia tetraedra, Lumbricus terrestris, Lumbricus rubellus and Allobophora chlorotica have been found to remove heavy metals (Cd, Pb, Cu, Hg, etc.) pesticides and lipophilic organic micropollutants like the polycyclic aromatic hydrocarbons (PAH) from the soil. They ‘absorb’ the dissolved chemicals through the moist ‘body wall’ in the interstitial water and also ‘ingest’ by mouth while the soil passes through the gut. They either ‘bio-transform’ or ‘biodegrade’ the chemical contaminants rendering them harmless in their bodies. Meanwhile the quality of the soil is improved significantly in terms of physical, chemical and biological properties as the worms thoroughly upturn and disperse the soil, ingest large volumes of soil and excrete nutritive materials (NKP and micronutrients) in the form of ‘vermicasts’ along with millions of beneficial soil microbes including nitrogen fixers.     

An experimental assessment on the influence of high fuel injection pressure with ternary fuel (diesel–mahua methyl ester–pentanol) on performance,combustion, and emission characteristics of common rail direct injection diesel engine

Environmental Science and Pollution Research - Optimization of fuel injection strategies can maximize the utilization of ternary fuel by addressing the issues concerning fuel consumption, engine...     

Performance enhancement of the photovoltaic system with different cooling methods

Environmental Science and Pollution Research - Solar energy has been a vital renewable energy source for humanity for decades. Researchers have proposed many strategies to harness the same but...     

Effect Of n-amyl alcohol/biodiesel blended nano additives on the performance,combustion and emission characteristics of CRDi diesel engine

Environmental Science and Pollution Research - This paper deals with the study on the influence of the effects of iron oxide nanoparticle additives when added to ternary fuel (diesel + mahua methyl...