Use of activated dry flowers (ADF) of Alstonia Scholaris for chromium (Vl) removal: equilibrium, kinetics and thermodynamics studies

In this study, a natural adsorbent (activated dry flowers (ADF)) was prepared from plant-derived waste biomass by chemical activation and employed for chromium (VI) removal from aqueous medium using experimental batch technique. Experiments were carried out as function of adsorbent dosage, pH, and contact time. The maximum chromium (Vl) removal was observed at initial pH 3 (~94 % removal). The equilibrium data was fitted well to Langmuir isotherm. The adsorption capacity of ADF was found to be 4.40 (mg chromium (Vl)/g) which was comparable to the adsorption capacity of some other adsorbents documented. Among various kinetic models applied, pseudo second-order model was found to explain the kinetics of chromium (VI) adsorption most effectively (R ² >0.99). Thermodynamic parameters such as ΔG, ΔS, and ΔH shows that adsorption process was spontaneous and endothermic at all the concentration ranges studied. Desorption of chromium (Vl) with 2 N NaOH was effective (~71 %) and, hence, there exists the possibility of recycling the ADF. The major advantages of using ADF as an adsorbent are due to its effectiveness in reducing the concentration of chromium (Vl) to very low levels. It requires little processing and is reversible as well as eco-friendly in contrast to traditional methods.     

Anthropometry for Design for the Elderly

This paper presents anthropometric data on elderly people in Australia. Data were collected in the metropolitan city of Sydney, NSW, Australia. In all 171 elderly people (males and females, aged 65 years and above) took part in the study. Mean values, standard deviations, medians, range, and coefficients of variation for the various body dimensions were estimated. Correlation coefficients were also calculated to determine the relationship between different body dimensions for the elderly population. The mean stature of elderly Australian males and females were compared with populations from other countries. The paper discusses design implications for elderly people and provides several examples of application of the anthropometric data.     

Workplace Design for Manual Assembly Tasks: Effect of Spatial Arrangement on Work-Cycle Time

This article reports the results of an experimental study undertaken to investigate the effect of spatial arrangement of assembly board and parts bin in the normal work area on work-cycle time in manual assembly tasks. Operator performance was measured in terms of average work-cycle time taken to complete a laboratory-simulated manual assembly task. Results showed that both location and distance factors had significant effects on work-cycle time. Effect of the size of parts was also investigated in the study. Average observed work-cycle times were compared with the methods–time measurement (MTM) values. Repetitive manual assembly tasks are common in industry and are thought to lead to musculoskeletal disorders. The results of this research are important for ergonomic design of the workplace for assembly tasks, which would help to enhance operators’ efficiency.     

Distribution behavior and carcinogenic level of some polycyclic aromatic hydrocarbons in roadside soil at major traffic intercepts within a developing city of India

A study of polycyclic aromatic hydrocarbons (PAHs) pollution in roadside soil was conducted at a developing city locations of Jalandhar (Punjab), India in winter season to ascertain the contamination levels and their distribution behavior in roadside soil. PAHs concentration level of ten locations was measured at 1, 2, and 3 m distances from roadside soil covering all the major traffic intercepts within a city. Samples were extracted in acetone and dichloromethane (1:1) using soxhlet extraction. The extracts were filtered on a silica gel micro column to remove impurities and eluate was subjected to GC-FID. The total average PAHs concentration (city average) was found to be 4.04 μg g(-1), whereas the concentration of 16 individual PAHs was found to vary between 0.008 and 28.4 μg g(-1). The average concentration of noncarcinogenic and carcinogenic PAHs in all the samples was 2.17 and 6.41 μg g(-1) (ratio 1:2.95). The concentration of five ringed PAHs was found to be 45% to 60%, whereas two ringed PAHs were found to be in the range from 0.28% to 0.56% in all most all locations. The average highest PAHs concentration for any individual location was found as 12.23 μg g(-1) at DAV Chowk at 1 m distance and minimum concentration was 0.98 μg g(-1) at Maqsuda Chowk at 1 m distance from roadside. DiB (ah) A was the individual PAHs found in highest concentration in all the intercepts ranging between 1.26 and 28 μg g(-1). At most of the city intercepts, total carcinogenic PAHs concentration was found to range from 60% to 80% in comparison to noncarcinogenic PAHs (20%-40%) at most of the intercepts. The pollution level our study was compared with other cities of India/worldwide.     

A Multilevel Approach to Manual Lifting in Manufacturing Industries

Musculoskeletal injuries are often the consequences of wrong postural configurations used during Manual Materials Handling (MMH). This eventually leads to a large payout of worker’s compensation and loss of production time. A simulated study of back injury risks has been carried out on seven selected manufacturing industries to identify and evaluate harmful working postures. For each MMH task, Ovako Working Posture Analyzing System (OWAS) codes have been identified with the help of motion study pictures. Also, Chaffin's biomechanical model was used to calculate L5/S1 load compression values on the spine during MMH activities. The multilevel approach adopted was a combination of OWAS and Chaffin’s biomechanical model. The application of a digitizer enabled us to identify the coordinates and it made a subsequent evaluation of the angles of each body link possible.