Ah receptor for 2,3,7,8-tetrachlorodibenzo-p-dioxin: Comparative studies in mammalian and nonmammalian species

The Ah receptor was identified and characterized in cytosol from a large number of diverse animal species. Molecular properties of the Ah receptor were similar in all species which had detectable receptor. However, subtle differences in receptor properties exist among animal species and these differences indicate that the Ah receptor protein is not identical in all species. It is not yet known whether differences in receptor properties among animal species play a significant role in determining differential susceptibility of the species to toxicity from halogenated aromatic compounds.     

Analysis of Ah receptor pathway activation by brominated flame retardants

Brominated flame-retardants (BFRs) are used as additives in plastics to decrease the rate of combustion of these materials, leading to greater consumer safety. As the use of plastics has increased, the production and use of flame-retardants has also grown. Many BFRs are persistent and have been detected in environmental samples, raising concerns about the biological/toxicological risk associated with their use. Most BFRs appear to be non-toxic, however there is still some concern that these compounds, or possible contaminants in BFRs mixtures could interact with cellular receptors. In this study we have examined the interaction of decabromodiphenyl ether, Firemaster BP4A (tetrabromobisphenol A), Firemaster PHT4 (tetrabromophthalic anhydride), hexabromobenzene, pentabromotoluene, decabromobiphenyl, Firemaster BP-6 (2,2^′,4,4^′,5,5^′-hexabromobiphenyl) and possible contaminants of BFR mixtures with the Ah receptor. Receptor binding and activation was examined using the Gel Retardation Assay and increased expression of dioxin responsive genes was detected using the reporter gene based CALUX assay. The results demonstrate the ability of BFRs to activate the AhR signal transduction pathway at moderate to high concentrations as assessed using both assays. AhR-dependent activation by BFRs may be due in part to contaminants present in commercial/technical mixtures. This was suggested by our comparative analysis of Firemaster BP-6 versus its primary component 2,2^′,4,4^′,5,5^′-hexabromobiphenyl. Some technical mixtures of brominated flame-retardants contain brominated biphenyls, dioxins or dibenzofurans as contaminants. When tested in the CALUX assay these compounds were found to be equivalent to, or more active than their chlorinated analogues. Relative effective potency values were determined from dose response curves for these brominated HAHs.     

The hardrock minerals industry and the landscape architect

The landscape architecture profession is a source of creative thinking and planning which is relatively untapped within the mining industry in the United States of America. The landscape architect has been active in European operations for years as indicated by the four examples presented. The landscape architect can provide an important interface with mine design and engineering and environmental affairs. To initiate this interface within the United States, and increase its effectiveness, six objectives are presented and discussed.     

Risk factors for increased BTEX exposure in four Australian cities

Benzene, toluene, ethylbenzene and xylenes (BTEX) are common volatile organic compounds (VOCs) found in urban airsheds. Elevated levels of VOCs have been reported in many airsheds at many locations, particularly those associated with industrial activity, wood heater use and heavy traffic. Exposure to some VOCs has been associated with health risks. There have been limited investigations into community exposures to BTEX using personal monitoring to elucidate the concentrations to which members of the community may be exposed and the main contributors to that exposure. In this cross sectional study we investigated BTEX exposure of 204 non-smoking, non-occupationally exposed people from four Australian cities. Each participant wore a passive BTEX sampler over 24h on five consecutive days in both winter and summer and completed an exposure source questionnaire for each season and a diary for each day of monitoring. The geometric mean (GM) and range of daily BTEX concentrations recorded for the study population were benzene 0.80 (0.04-23.8 ppb); toluene 2.83 (0.03-2120 ppb); ethylbenzene 0.49 (0.03-119 ppb); and xylenes 2.36 (0.04-697 ppb). A generalised linear model was used to investigate significant risk factors for increased BTEX exposure. Activities and locations found to increase personal exposure included vehicle repair and machinery use, refuelling of motor vehicles, being in an enclosed car park and time spent undertaking arts and crafts. A highly significant difference was found between the mean exposures in each of the four cities, which may be explained by differences in fuel composition, differences in the mix and density of industry, density of motor vehicles and air pollution meteorology.     

The Role of Macrophytes in the Retention of Phosphorus in the River Thame,England

The effects of the growth of the dominant species of macrophytes on phosphorus transport in the River Thame, a nutrient enriched lowland clay catchment in southern England, were assessed using a mass-balance approach. Macrophyte abundance was estimated between late March and early June at three sites along the river. the plant biomass of phosphorus and the total phosphorus content of sediments in the main part of the river channel and sediments associated with the plant roots were measured on each occasion. Total phosphorus concentrations in the river water were measured at weekly intervals at a gauging station at the lower end of the study reach.

The results showed that the phosphorus content of plants at the site most impacted by sewage derived phosphorus was < 1% of the flux of total phosphorus estimated for the water column in April and May. Phosphorus contained in the total standing crop of macrophytes at the least impacted site was estimated as approximately 3% of the mean daily flux of total phosphorus in the water. Although no trends were found in the total phosphorus contents of the roots, shoots or sediments through the season, differences in the phosphorus content of the sediments were found between sites with different phosphorus loading. Higher porewater and Equilibrium Phosphate Concentrations (EPC_oS) were recorded at the site most impacted by sewage effluent when compared to an upstream sampling site.     

Analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples from the Flemish measurement network: correlation between the CALUX bioassay and GC-HRMS

Since the CALUX (Chemically Activated LUciferase gene eXpression) bioassay is a fast, sensitive and inexpensive tool for the analysis of a high number of samples, the use of this technique in routine analysis of atmospheric deposition samples may be a valuable alternative for GC-HRMS. In this study, a validated CALUX method was used for the analysis of PCDD/Fs and dioxin-like PCBs in more than 90 atmospheric deposition samples for different locations in Flanders. The samples were taken in residential and agricultural areas, where a threshold limit of 21 pg WHO-TEQ m⁻² d⁻¹ for the sum of PCDD/Fs and dioxin-like PCBs was set, and in industrial zones and natural reserves, where no official threshold limit is available. The results from the Flemish measurement program showed correlation between CALUX and GC-HRMS for all the samples, originating from the different areas (R² of 0.81, 0.53 and 0.64 for dl-PCBs, PCDD/Fs and sum of both fractions, respectively). Median CALUX/GC-HRMS ratios of 2.0, 0.9 and 1.3 were reported for the PCDD/Fs, dioxin-like PCBs and the sum of both fractions, respectively. The results show that the CALUX bioassay is a valuable alternative tool for the classic GC-HRMS analysis of atmospheric deposition samples in the Flemish measurement network.     

Analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples from the Flemish measurement network: Optimization and validation of a new CALUX bioassay method

Since the CALUX (Chemically Activated LUciferase gene eXpression) bioassay is a fast, sensitive and inexpensive tool for the analysis of a high number of samples, validation of new methods is urgently needed. In this study, a new method for the analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples with the CALUX bioassay was developed, optimized and validated. The method consists of 4 steps: filtration, extraction, clean up and bioassay analysis. To avoid the use of large amounts of toxic solvents, new techniques were used for filtration and extraction: a C18 filter was used instead of a liquid/liquid extraction and an Accelerated Solvent Extractor (ASE) was used instead of the traditional soxhlet extraction. After pre-oxidation of the sample extract, clean up was done using a multi-layer silica gel column coupled to a carbon column. The PCDD/F and PCB fractions were finally analyzed with the H1L7.5c1 and/or the H1L6.1c3 mouse hepatoma cell lines. The limit of quantification was 1.4 pg CALUX-BEQ m⁻² d⁻¹ for the PCBs and 5.6 pg CALUX-BEQ m⁻² d⁻¹ for the PCDD/Fs, when using the new sensitive H1L7.5c1 cell line. The GC-HRMS recovery for all PCDD/F congeners was between 55% and 112%, with a mean recovery of 90%. CALUX recoveries of spiked procedural blanks were between the accepted ranges of 80-120%. Repeatability and reproducibility were satisfactory and no interferences from metals were detected. The first results from the Flemish measurement program showed good correlation between CALUX and GC-HRMS.     

Which comes first,organizational culture or performance? A longitudinal study of causal priority with automobile dealerships

Prior research supports a link between organizational culture and performance but generally falls short of establishing causality or determining the direction of a culture–performance (C‐P) relationship. Using data collected from 95 franchise automobile dealerships over 6 years, we studied longitudinal culture–performance relationships to determine whether culture or performance has causal priority, or alternatively, whether a reciprocal relationship exists. Results from cross‐lagged panel analyses indicate that culture “comes first,” consistently predicting subsequent ratings of customer satisfaction and vehicle sales. Furthermore, the positive effect of culture on vehicle sales is fully mediated by customer satisfaction ratings. Copyright © 2015 John Wiley & Sons, Ltd.