Potential of microalgae as biopesticides to contribute to sustainable agriculture and environmental development

The loss of yields from agricultural production due to the presence of pests has been treated over the years with synthetic pesticides, but the use of these substances negatively affects the environment and presents health risks for consumers and animals. The development of agroecological systems using biopesticides represents a safe alternative that contributes to the reduction of agrochemical use and sustainable agriculture. Microalgae are able to biosynthesize a number of metabolites with potential biopesticidal action and can be considered potential biological agents for the control of harmful organisms to soils and plants. The present work aims to provide a critical perspective on the consequences of using synthetic pesticides, offering as an alternative the biopesticides obtained from microalgal biomass, which can be used together with the implementation of environmentally friendly agricultural systems.     

Larvicidal and pupicidal activities of eco-friendly phenolic lipid products from Anacardium occidentale nutshell against arbovirus vectors

Environmental Science and Pollution Research - Aedes aegypti and Culex quinquefasciatus are vectors of diseases that constitute public health problems. The discovery of products capable of...     

“Modern agriculture” transfers many pesticides to watercourses: a case study of a representative rural catchment of southern Brazil

Environmental Science and Pollution Research - The total cultivated area in Brazil reached to 62 million ha in 2018, with the predominance of genetically modified soybean and corn (36 and 17...     

Environmental performance evaluation of agro-industrial innovations – Part 2: methodological approach for performing vulnerability analysis of watersheds

Environmental vulnerability analysis has been sparsely used in environmental performance evaluation (EPE) of technological innovations. The present paper proposes a methodological approach to carry out vulnerability analysis of watersheds and to integrate this analysis into methods of environmental performance evaluation of agro-industrial innovations. This approach is applied to the Ambitec-Life Cycle method, described in Part 1 (this issue) of this study. The case study of green coconut substrate compared to ripe coconut substrate, also described in Part 1 (this issue), is now presented considering the vulnerability analysis of the watersheds where the life cycle stages of these products occur. The integration of vulnerability analysis in Ambitec-Life Cycle contributes to a better understanding of the environmental aspects of agro-industrial technological innovations with potential to cause significant impacts in watersheds where these innovations are implemented.     

Environmentally friendly bleaching of cotton using laccases

A new strain of Trametes hirsuta was found to oxidize various cotton flavonoids. Here we show that laccases of this organism were responsible for oxidation of the flavonoids morin, luteolin, rutin and quercetin. Out of two laccases produced by T. hirsuta (60.7 and 51.0 kDa) the more prominent 60.7 kDa laccase was purified and showed K _m and k _cat values of 75.5, 20.9 and 49.4 μM and 72.5, 96.3 and 32.7 s⁻¹, hours on ABTS, syringaldazide and DMP, respectively. Pretreatment of cotton with the T. hirsuta laccase resulted in a whiteness increase of 8.5%.     

Biodegradable Blends with Potential Use in Packaging: A Comparison of PLA/Chitosan and PLA/Cellulose Acetate Films

Poly(lactic acid) (PLA) is a biodegradable polymer that exhibits high elastic modulus, high mechanical strength, and feasible processability. However, high cost and fragility hinder the application of PLA in food packaging. Therefore, this study aimed to develop flexible PLA/acetate and PLA/chitosan films with improved thermal and mechanical properties without the addition of a plasticizer and additive to yield extruder compositions with melt temperatures above those of acetate and chitosan. PLA blends with 10, 20, and 30 wt% of chitosan or cellulose acetate were processed in a twin-screw extruder, and grain pellets were then pressed to form films. PLA/acetate films showed an increase of 30 °C in initial degradation temperature and an increase of 3.9 % in elongation at break. On the other hand, PLA/chitosan films showed improvements in mechanical properties as an increase of 4.7 % in elongation at break. PLA/chitosan film which presented the greatest increase in elongation at break proved to be the best candidate for application in packaging.     

Pharmaceutical compound removal efficiency by a small constructed wetland located in south Brazil

Environmental Science and Pollution Research - The fate of pharmaceuticals during the treatment of effluents is of major concern since they are not completely degraded and because of their...     

Identification of some plasticizers compounds in landfill leachate

In this work it was described a simple method for extraction of plasticizer compounds (mainly phthalate esters and bisphenol A (BPA)) from landfill leachate samples. The samples were submitted to an extraction procedures based on precipitation, solid phase extraction (SPE) and ionic exchange chromatography (IEC). Firstly the landfill leachate sample was acidified by addition of HCl concentrated, in order to precipitate the organic compounds that are less soluble in water. The precipitate was washed with several solvents. The aqueous phase was then submitted to SPE with XAD-4 resin and IEC with Amberlyst A-27 resin. The instrumental analysis was performed by gas chromatography with mass spectrometer detector (GC/MSD) and the compounds were identified by the GC/MSD library (Wiley) and by using some standard substances. These methodologies allow the isolation and identification of the following compounds: dioctylphthalate, diisobutilphthalate, BPA, benzoic acid, palmitic acid and diisopentylphthalate. The methods are very simple, rapid and selective, for plasticizers extraction from landfill leachate matrices.     

Solid-phase fluorescence spectroscopy to characterize organic wastes

The production of solid organic waste (SOW) such as sewage sludge (SS) or municipal solid waste (MSW) has been continuously increasing in Europe since the beginning of the 1990'. Today, the European Union encourages the stabilization of these wastes using biologic processes such as anaerobic digestion and/or composting to produce bio-energy and organic fertilizers. However, the design and management of such biologic processes require knowledge about the quantity and quality of the organic matter (OM) contained in the SOW. The current methods to characterize SOW are tedious, time-consuming and often insufficiently informative. In this paper, we assess the potential of solid-phase fluorescence (SPF) spectroscopy to quickly provide a relevant characterization of SOW. First, we tested well known model compounds (tryptophan, bovine serum albumin, lignin and humic acid) and biologic matrix (Escherichia coli) in three dimensional solid-phase fluorescence (3D-SPF) spectroscopy. We recorded fluorescence spectra from proteinaceous samples but we could not record the fluorescence emitted by lignin and humic acid powders. For SOW samples, fluorescence spectra were successfully recorded for MSW and most of its sub-components (foods, cardboard) but impossible for SS, sludge compost (SC) and ligno-cellulosic wastes. Based on visual observations and additional assays, we concluded that the presence of highly light-absorptive chemical structures in such dark-colored samples was responsible for this limitation. For such samples, i.e. lignin, humic acid, SS, SC and ligno-cellulosic wastes, we show that laser induced fluorescence (LIF) spectroscopy enables the acquisition of 2D fluorescence spectra.