Volcano-related materials in concretes: a comprehensive review

Massive volcano-related materials (VRMs) erupted from volcanoes bring the impacts to natural environment and humanity health worldwide, which include generally volcanic ash (VA), volcanic pumice (VP), volcanic tuff (VT), etc. Considering the pozzolanic activities and mechanical characters of these materials, civil engineers propose to use them in low carbon/cement and environment-friendly concrete industries as supplementary cementitious materials (SCMs) or artificial/natural aggregates. The utilization of VRMs in concretes has attracted increasing and pressing attentions from research community. Through a literature review, this paper presents comprehensively the properties of VRMs and VRM concretes (VRMCs), including the physical and chemical properties of raw VRMs and VRMCs, and the fresh, microstructural and mechanical properties of VRMCs. Besides, considering environmental impacts and the development of long-term properties, the durability and stability properties of VRMCs also are summarized in this paper. The former focuses on the resistance properties of VRMCs when subjected to aggressive environmental impacts such as chloride, sulfate, seawater, and freezing–thawing. The latter mainly includes the fatigue, creep, heat-insulating, and expansion properties of VRMCs. This study will be helpful to promote the sustainability in concrete industries, protect natural environment, and reduce the impacts of volcano disaster. Based on this review, some main conclusions are discussed and important recommendations regarding future research on the application of VRMs in concrete industries are provided.     

Flowering pattern of biodiesel plant Jatropha in frost- and drought-prone regions of Botswana

Jatropha has gained interest as a potential biodiesel feedstock. Nevertheless, its oil production decreases significantly in frost- and drought-prone regions. In this study, we characterized the flowering pattern of Jatropha in Botswana in the 2014/2015 season. Extensive springtime pruning synchronized Jatropha regrowth in summer and effectively stimulated growth after frost damage. Flowering started in February 2015 and peaked in April and May. Wide variations in flowering frequency were observed among different Jatropha accessions. Trees flowering in February and March produced fruit in May, but most trees only flowered in April and May and did not yield fruit because of cold snaps. These observations suggested that harvesting seed before wintertime is the key to improve Jatropha production in the Botswana climate. This study highlighted the importance of inducing early flowering by developing new agricultural managements. These may include frost cover and sun shades to prevent stress-induced damage, canopy control by pruning, optimization of fertilization practice, and/or introduction of superior Jatropha varieties.     

α1-Microglobulin levels and correlation with cadmium and other metals in urine of non-smoking women among general populations in Japan

The present study was initiated to examine urinary α₁-microglobulin (α₁-MG-U) levels among non-smoking women in the general population in Japan. A previously established database on spot urine samples from adult woman volunteers in 10 non-polluted areas all over Japan was re-examined. The data examined were on α₁-MG-U, cadmium, calcium, magnesium and zinc levels in urine (Cd-U, Ca-U, Mg-U and Zn-U, respectively), urinary creatinine (CR or cr), urine specific gravity (SG or sg), smoking habits and age. Thus, 8975 never-smoking women were selected for statistical analyses. The grand geometric mean (GM) for α₁-MG-U among the population was 2.1?mg/L or 2.5?mg/g?cr, depending on the correction for urine density. It was 1.1?µg/L or 1.3?µg/g?cr for GM Cd-U. The inter-area difference in α₁-MG-U was <1.5?mg/g?cr or <0.7?mg/L; the area with the highest or lowest GM Cd-U was not always highest or lowest in GM α₁-MG-U. The correlation coefficient (0.53) between log?Cd-U and log?α₁-MG-U (both without urine density correction) became substantially smaller when the analyte levels were corrected for CR (0.25) or SG (0.26). In multiple regression analysis, the power of influence of the five independent variables (log?Cd-U, Ca-U, Mg-U, Zn-U and age) in combination was small (R ²?≦?0.13). In contrast, logistic regression analysis suggested that α₁-MG-U might be elevated as a function of an increase in Cd-U, depending on the cut-off values. Discussion was made on dose (Cd-U_cr) and response (α₁-MG-U_cr) relationship based on information available in literatures to show that the increment in α₁-MG-U_cr per Cd-U_cr was much greater when Cd-U_cr was large, e.g., in excess of 10?µg/g?cr.     

Comparison of polybrominated diphenyl ethers in fish, vegetables, and meats and levels in human milk of nursing women in Japan

At present, little is known about the occurrence of polybrominated diphenyl ethers (PBDEs) in fish and food products sold in Japan. To investigate whether human exposure to PBDEs through the diet is significant, the concentrations of PBDEs were determined in fish and in meat and vegetables sold in two food markets in the city of Hirakata, Osaka prefecture. The concentrations of PBDEs in the breast milk of 12 primiparae nursing women at one month after delivery also were determined to ascertain the relationship between the levels found in the diet and levels in humans. sigma PBDE concentrations ranged between 21 and 1650 pg/g fresh weight in the edible tissues of five species of fish and one shellfish species. The highest concentrations were measured in yellow-fin tuna, followed by short-necked clam, salmon, yellowtail, mackerel and young yellowtail. Interestingly, sigma PBDE concentrations were not statistically significantly different in two cultured mackerel samples from Japan and mackerel collected from northern European waters. sigma PBDE concentrations in beef, pork and chicken meat (ranging between 6.25 and 63.6 pg/g fresh weight) and in three different vegetables (ranging between 38.4 and 134 pg/g fresh weight) were significantly lower than the concentrations in fish. In human milk, sigma PBDE concentrations ranged between 668 and 2840 pg/g lipid basis, which is comparable to the levels in populations of nursing women reported in Sweden and elsewhere. There was a strong positive relationship between PBDE concentrations in human milk and dietary intake of fish and shellfish, which was established in the women from responses to a questionaire on food consumption habits. The results of this study of food products commonly consumed in Japan and the levels found in nursing women raise a concern about low level PBDE contamination of fish and other foods intended for human consumption.     

Bioethanol production from enzymatically saccharified lawn clippings from a golf course

The utilization of bioethanol is being focused on as a fuel alternative to oil and or natural gas. Bioethanol production from cellulosic plant residues is one of the solutions proposed for the problems caused by usage of food crops that are also vital for human consumption, such as sugar cane and corn, as a source of bioethanol. However, to utilize these new sources for bioethanol production, conditions for saccharification in each different material have not been optimized. In this study, we reported some optimum conditions for the saccharification of Korean lawn grass (KL) and bent grass (BG) using acremonium cellulase and endoglucanase as saccharifying enzymes for ethanol fermentation. With respect to saccharification of KL and BG, 0.19 and 0.18 g of d-glucose per g-substrate at maximum were produced, respectively. Comminution with a ball mill was found to be effective in the saccharification of KL, while ball-milled BG showed no significant improvement in saccharification. Being incorporated with 99 % of d-glucose consumption, saccharified KL was incubated for 3 days with Saccharomyces cerevisiae and Zymomonas mobilis, respectively, and each mixture fermented to ethanol yielding approximately 100 % of theoretical values from d-glucose consumption, respectively.     

Reward and non-reward learning of flower colours in the butterfly Byasa alcinous (Lepidoptera: Papilionidae)

Learning plays an important role in food acquisition for a wide range of insects. To increase their foraging efficiency, flower-visiting insects may learn to associate floral cues with the presence (so-called reward learning) or the absence (so-called non-reward learning) of a reward. Reward learning whilst foraging for flowers has been demonstrated in many insect taxa, whilst non-reward learning in flower-visiting insects has been demonstrated only in honeybees, bumblebees and hawkmoths. This study examined both reward and non-reward learning abilities in the butterfly Byasa alcinous whilst foraging among artificial flowers of different colours. This butterfly showed both types of learning, although butterflies of both sexes learned faster via reward learning. In addition, females learned via reward learning faster than males. To the best of our knowledge, these are the first empirical data on the learning speed of both reward and non-reward learning in insects. We discuss the adaptive significance of a lower learning speed for non-reward learning when foraging on flowers.     

Photochemical nitrosation of dimethylamine in aqueous solution containing nitrite

Dimethylamine was found to be nitrosated photochemically in aqueous solution containing nitrite both by the irradiation with a high pressure mercury lamp and by the exposure to sunlight to give nitrosodimethylamine, a well-known carcinogen. The nitrosation occurred more readily at alkaline pH than at acidic and neutral pH. These findings suggest that nitrosodimethylamine is produced photochemically under natural environmental conditions.     

Influence of H<Subscript>2</Subscript> on the decomposition of halides by nonthermal plasma incorporated with in situ alkaline absorption

To control the emission of halides into the environment, an experiment on the nonthermal plasma decomposition of the halides CF₄, CHF₃, C₂HCl₃, and CHClF₂ was conducted in a wire-in-tube corona reactor. It was found that the decomposition of C₂HCl₃ and CHClF₂ was easy compared with the decomposition of CF₄ and CHF₃. With the addition of H₂ in N₂ gas, the decomposition ratio of CF₄, C₂HCl₃, and CHClF₂ increased. In contrast, the decomposition ratio of CHF₃ in a hydrogen-rich atmosphere was lower than that in an N₂ atmosphere. It was demonstrated that the yields of HF and/or HCl formed during halide decomposition clearly increased in the presence of H₂ in N₂ gas. Furthermore, in order to prevent the production of unwanted products from halide decomposition, a combination of plasma decomposition and in situ alkaline absorption was devised by coating a layer of Ca(OH)₂ onto the surface of the grounding electrode. It was demonstrated that the Ca(OH)₂ sorbent played an effective role as a scavenger, participating in halide decomposition by capturing reaction products such as HCl and HF, therefore resulting in increased halide decomposition.     

The role of forest stand density in controlling soil erosion: implications to sediment-related disasters in Japan

The role of forest stand density in controlling soil erosion was investigated in Ehime Prefecture, Japan. The main objective was to compare soil erosion under different forest conditions including forest type, species composition, and stand density as influenced by thinning operations. Relative yield index (Ry) was used as an indicator of stand density to reflect the degree of management operations in the watershed. Eleven treatments were established based on the above forest conditions. Soil loss was collected in each of the 11 treatments after each rainfall event for a period of 1 year. The paper presents summary data on soil loss as affected by forest conditions and rainfall patterns. Findings showed that an appropriate forest management operation, which can be insured by stand density control, is needed to reduce soil loss. The present study plays an important role in clarifying technical processes related to soil erosion, while it helps linking these elements to current Japanese forestry issues and bringing new inputs to reducing sediment-related disasters in Japan.