Inorganic iodine incorporation into soil organic matter: evidence from iodine K-edge X-ray absorption near-edge structure

The transformation of inorganic iodine (I⁻ and IO₃⁻) incubated in soils with varying amounts of organic matter (Andosols from the surface layer of an upland field and forest, as well as Acrisols from surface and subsurface layers of an upland field) was investigated by using the iodine K-edge X-ray absorption near-edge structure (XANES). After 60 d of reaction, both I⁻ and IO₃⁻ were transformed into organoiodine in surface soils containing sufficient amounts of organic matter, whereas IO₃⁻ remained unchanged in the subsurface soil of Acrisols with low organic matter contents. Transformation of IO₃⁻ into organoiodine was not retarded when the microbial activity in soil was reduced by γ-ray irradiation, suggesting that microbial activity was not essential for the transformation of inorganic iodine into organoiodine. Soil organic matter has the ability to transform inorganic iodine into organoiodine.     

Rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar

The rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass tar was carried out in a hydrogen atmosphere at 1073 K and 973 K. The assumed oligomers were partially pyrolyzed epoxy resin with biomass tar as solvent for the resin. The product distributions obtained from rapid hydropyrolysis of phenol and bisphenol-A are shown. We also discuss the effects of reaction temperature and hydrogen partial pressure on the product yield. In particular, more phenol was produced from bisphenol-A at 973 K than at 1073 K. The yield of methane, which was the final hydropyrolysis product, increased with increasing hydrogen partial pressure, whereas benzene and phenol were believed to behave as intermediate products in the hydropyrolysis reaction. The results suggest that phenol could be obtained with high selectivity from tar by optimizing the reaction conditions.     

Genetic engineering of cyanobacteria to enhance biohydrogen production from sunlight and water

To mitigate global warming caused by burning fossil fuels, a renewable energy source available in large quantity is urgently required. We are proposing large-scale photobiological H(2) production by mariculture-raised cyanobacteria where the microbes capture part of the huge amount of solar energy received on earth's surface and use water as the source of electrons to reduce protons. The H(2) production system is based on photosynthetic and nitrogenase activities of cyanobacteria, using uptake hydrogenase mutants that can accumulate H(2) for extended periods even in the presence of evolved O(2). This review summarizes our efforts to improve the rate of photobiological H(2) production through genetic engineering. The challenges yet to be overcome to further increase the conversion efficiency of solar energy to H(2) also are discussed.     

Waste reduction through variable charging programs: its sustainability and contributing factors

 In this study, we analyzed the sustainability and determinant factors of waste reduction through variable charging schemes. We drew three main conclusions from the study. (1) Waste reduction was achieved by variable charging and was sustained over an average of at least 10 years. The results regarding the sustainability of the price effect were inconclusive. (2) The main factors contributing to the combustible waste reduction achieved through variable charging were two-tier pricing and the price of waste bags. The effect of two-tier pricing programs was positive. (3) Waste paper recycling and variable charging reinforce each other to promote waste reduction. Received: September 3, 2001 / Accepted: January 13, 2002     

Effect of decabromodiphenyl ether and antimony trioxide on controlled pyrolysis of high-impact polystyrene mixed with polyolefins

The controlled pyrolysis of polyethylene/polypropylene/polystyrene mixed with brominated high-impact polystyrene containing decabromodiphenyl ether as a brominated flame-retardant with antimony trioxide as a synergist was performed. The effect of decabromodiphenyl ether and antimony trioxide on the formation of its congeners and their effect on distribution of pyrolysis products were investigated. The controlled pyrolysis significantly affected the decomposition behavior and the formation of products. Analysis with gas chromatograph with electron capture detector confirmed that the bromine content was rich in step 1 (oil 1) liquid products leaving less bromine content in the step 2 (oil 2) liquid products. In the presence of antimony containing samples, the major portion of bromine was observed in the form of antimony bromide and no flame-retardant species were found in oil 1. In the presence of synergist, the step 1 and step 2 oils contain both light and heavy compounds. In the absence of synergist, the heavy compounds in step 1 oil and light compounds in step 2 oils were observed. The presence of antimony bromide was confirmed in the step 1 oils but not in step 2 oils.     

A badge-type personal sampler for measurement of personal exposure to NO2 and NO in ambient air

A badge-type personal sampler was developed for measuring personal exposure to nitrogen dioxide (NO₂). An absorbent sheet containing triethanolamine (TEA) solution absorbed NO₂ which diffused through five layers of hydrophobic fiber filter. Wind effects on absorption rate were suppressed by these filter layers. NO₂ was measured by the sampler with a sensitivity of 124.8 μg h/m³ (66 ppb h) and an accuracy of within ± 20%. It could be used for measuring personal exposure to NO₂ without interfering with the wearer's daily activities. Nitric oxide (NO) could be measured after a small modification to the sampler provided oxidation ability to the layers of diffusion filter. Three layers of hydrophobic fiber filter were replaced by 12 layers of glass fiber filter containing chromium trioxide solution. NO was oxidized to NO₂ in the oxidation layers and absorbed by the absorbent sheet together with the coexisting NO₂. Sensitivity and accuracy of the sampler for NO were nearly equal to that for NO₂.     

The individual and cumulative effect of brominated flame retardant and polyvinylchloride (PVC) on thermal degradation of acrylonitrile-butadiene-styrene (ABS) copolymer

Acrylonitrile-butadiene-styrene (ABS) copolymers without and with a polybrominated epoxy type flame retardant were thermally degraded at 450 degrees C alone (10 g) and mixed with polyvinylchloride (PVC) (8 g/2 g). Gaseous and liquid products of degradation were analysed by various gas chromatographic methods (GC with TCD, FID, AED, MSD) in order to determine the individual and cumulative effect of bromine and chlorine on the quality and quantity of degradation compounds. It was found that nitrogen, chlorine, bromine and oxygen are present as organic compounds in liquid products, their quantity depends on the pyrolysed polymer or polymer mixture. Bromophenol and dibromophenols were the main brominated compounds that come from the flame retardant. 1-Chloroethylbenzene was the main chlorine compound observed in liquid products. It was also determined that interactions appear at high temperatures during decomposition between the flame retardant, PVC and the ABS copolymer.     

Spatio-temporal variations in the diet and stable isotope composition of the Argentine hake <Emphasis Type="Italic">Merluccius hubbsi</Emphasis> Marini, 1933 of the continental shelf of southeastern Brazil

The feeding ecology of Merluccius hubbsi was investigated in 2 regions of SE Brazil. The major food sources for the hakes were fish, crustaceans, and squid. In the upwelling system of Cabo Frio, the diet was very similar in the summers of 2001/2002 and spring 2002; fish were the most important prey followed by crustaceans. In Ubatuba, euphausiids were an important prey during the winter 2001 (100 m), while in the summer 2002, fish and amphipods predominated in the diet in the shallower site (40 m) and squid in the deeper site (100 m). The hakes showed temporal differences in stable isotope signatures in both regions, while C:N ratios varied only in Cabo Frio. δ¹⁵N and δ¹³C (bulk and corrected for lipid content) increased with fish length, which seems to be related to the increasing importance of fish and decreasing importance of euphausiids and amphipods in the diet of larger hakes. The mean trophic level of 3.7 for M. hubbsi was estimated using δ¹⁵N of bivalves as baseline and the fractionation of 3.4‰ between trophic levels.     

Is a voluntary approach an effective environmental policy instrument?: A case for environmental management systems

Using Japanese facility-level data from an OECD survey, we estimate the effects of implementation of ISO14001 and publication of environmental reports on the facilities’ environmental performance. While most previous studies focused on an index of emissions toxicity, this study examines three areas of impacts, none of which have been explored in the literature: natural resource use, solid waste generation, and wastewater effluent. The study is also unique in that the effectiveness of ISO14001 is considered in relation to environmental regulations. Our findings are summarized as follows. First, both ISO14001 and report publication help reduce all three impacts; the former appears more effective in all areas except wastewater. Second, environmental regulations do not weaken the effect of ISO14001. Third, assistance programs offered by local governments—a voluntary approach—promote facilities’ adoption of ISO14001. These findings suggest that governments can use command-and-control and voluntary approaches concurrently.     

Characteristics of dioxin emissions at startup and shutdown of MSW incinerators

Dioxin concentrations from municipal waste incinerators in Japan and elsewhere often show low concentrations that comply with legal limits (in this paper, the term "dioxin" designates WHO-TEQ: PCDD/Fs+dioxin-like PCB). However, such data is usually generated under normal steady state operational conditions, and there has been little investigation of releases occurring during startup and shutdown. It is important, therefore, to ascertain quantitatively emissions in an unsteady state (startup and shutdown) in order to correctly evaluate the relationship between emissions from a facility and the surrounding environment. The present study aimed to examine dioxin emissions of a continuously operated incinerator at startup and shutdown, and estimating the time period of greatest emission, and the processes causing dioxin generation. The startup process was divided into five stages and the shutdown into two; at each stage, dioxins in the flue gas were measured at the boiler outlet and the stack. From the concentration of dioxins and the flue gas volume at each stage, the amount of dioxins at startup and shutdown were calculated, and these were compared with that under steady state conditions. Dioxin concentration at the stack under steady state conditions was a very low level, while those at startup and shutdown were higher. In the case where dioxin concentration under a steady state is a low level like in this study, it is indicated that the total annual dioxin emission from a facility could be attributed to the startup periods.