A new method to quantify the impact of soil carbon management on biophysical soil properties: the example of two apple orchard systems in New Zealand

A new method to diagnose the environmental sustainability of specific orchard management practices was derived and tested. As a significant factor for soil quality, the soil carbon (C) management in the topsoil of the tree-row of an integrated and organic apple orchard was selected and compared. Soil C management was defined as land management practices that maintain or increase soil C. We analyzed the impact of the soil C management on biological (microbial biomass C, basal respiration, dehydrogenase activity, respiratory quotient) and physical (aggregate stability, amount of plant-available water, conductive mean pore diameter near water saturation) soil properties. Soil in the alley acted as a reference for the managed soil in the tree row. The total and hot-water-extractable C amounts served as a combined proxy for the soil C management. The soil C management accounted for 0 to 81% of the degradation or enhancement of biophysical soil properties in the integrated and organic system. In the integrated system, soil C management led to a loss of C in the top 0.3 m of the tree row within 12 yr, causing a decrease in microbial activities. In the tree row of the organic orchard, C loss occurred in the top 0.1 m, and the decrease in microbial activities was small or not significant. Regarding physical soil properties, the C loss in the integrated system led to a decrease of the aggregate stability, whereas it increased in the organic system. Generally, the impact of soil C management was better correlated with soil microbial than with the physical properties. With respect to environmental soil functions that are sensitive to the decrease in microbial activity or aggregate stability, soil C management was sustainable in the organic system but not in the integrated system.     

Biodegradable Water Soluble Copolymer for Antimicrobial Applications

Synthesis and characterization of novel biodegradable, water soluble and optically active DL-malic acid (DMA) and citric acid (CA) copolymers were studied for possible use as antibacterial agents. The copolymers were synthesized by direct bulk melt condensation in the absence of a catalyst above 150 °C. Characterization of obtained copolymers was carried out with the help of infrared absorption spectra, differential scanning calorimetry and thermo gravimetric analysis. The antibacterial activity of copolymers against bacteria was investigated. The results obtained shows the above copolymers possess a broad wound dressing activity against different types of bacteria and may be useful as antibacterial agents.     

Electron microscopy documenting the cellular metabolic fate of Zn IONS∗

In vertebrates and invertebrates Zn exist as complexed compounds with metallothioneins. However, its cellular level effects and metabolic fates are scantly documented. In the elucidation of this fact, EM results on hepatic cellular alterations in fish under lethal dose exposure at 4.0 ppm over a week is illustrated.

A large number of lysosomes in hepatic cells prevailed on exposure to Zn in its sulfate form. Evidently, due to metal compound stress and cellular damage lysosomal activity is augmented. The lysosomes harboured digestible material, presumably the aforementioned substrates. Contrary to it, fat droplets prevailed while glycogen depletion is noticeable. Unlike the effects of Hg, the nuclei were normal with granular chromatin and prominent nucleoli. However, the mitochondria contained some small intramitochondrial bodies. Similar to the effects of Hg, the cell membrane remained intact.

In vivo enzymatic studies indicated augmentation in catalase, acid‐ and alkaline‐phosphatases, while glucose‐6‐phosphatase is inhibited. However, only alkaline‐ and glucose‐6‐phosphatases are inhibited under in vitro conditions.

Thus, it is evident that Zn enhances cellular bioenergetic requirements culminating in glycogen depletion owing to stress, concomitantly envisaging inhibition of oxidative phosphorylation in the electron transport system.     

Reproductive status influences group size and persistence of bonds in male plains zebra (<Emphasis Type="Italic">Equus burchelli</Emphasis>)

Animal groups arise from individuals’ choices about the number, characteristics, and identity of associates. Individuals make these choices to gain benefits from their associations. As the needs of an individual change with its phenotype, so too we expect the nature of its associations to vary. In this paper, we investigate how the social priorities of male plains zebra (Equus burchelli) depend on reproductive state. An adult male is either a bachelor, and lacking mating access, or a stallion defending a harem. Multiple harems and bachelor males aggregate in larger herds. Herds frequently split and merge, affording males opportunities to change associates. Over a 4-year period, we sampled the herd associations in a population of 500–700 zebras. To isolate the effects of reproductive state on male social behavior, we account for potential confounding factors: changes in population size, grouping tendencies, and sampling intensity. We develop a generally applicable permutation procedure, which allows us to test the null hypothesis that social behavior is independent of male status. Averaging over all individuals in the population, we find that a typical bachelor is found in herds containing significantly more adults, bachelors, and stallions than the herds of a typical stallion. Further, bachelors’ bonds with each other are more persistent over time than those among stallions. These results suggest that bachelors form cohesive cliques, in which we may expect cooperative behaviors to develop. Stallion–stallion associations are more diffuse, and less conducive to long-term cooperation. This contribution is part of the special issue “Social Networks: new perspectives” (Guest Editors: J. Krause, D. Lusseau and R. James).     

Updraft gasification of juniper wood biomass using CO2–O2 and Air (N2–O2)

Biomass gasification is being considered as one of the most promising technologies for converting low-quality solid biomass fuel into gaseous fuel. Redberry juniper (Juniperus pinchotii), one of the woody species that dominate uncultivated lands in the southern great plains, USA, may have a great potential for bioenergy utilization. In this study, the results of gasification of juniper are presented. Juniper wood chips were gasified in an adiabatic fixed bed updraft gasifier using air and the mixture gas of carbon dioxide and oxygen (CO₂:O₂) as gasification medium. The effect of gasification parameters such as moisture contents, gasification mediums, and gasification temperature on produced gas properties and the tar yield were investigated. It was observed that oxy fuel gasification (the reaction of woody fuels with carbon dioxide) of juniper resulted in the increase of production of carbon monoxide, especially at higher peak gasification temperatures. As a result, the CO₂ gasification resulted in producing higher heating value gas (6264 kJ/nm³ with dilution of CO₂ and 19,750 kJ/nm³ inert free) compared to air gasification. For air gasification, it was observed that the updraft gasification produced large amount of the tar in the product gas (more than 100 g/nm³) for the fuels with moisture content between 6% and 11%. Generally, the tar yield increased with the increase of equivalence ratio (er) and moisture content. However, when the fuel moisture content reached 23.5%, the tar yield reduced significantly due low gasification temperature which reduced the less tar cracking.     

Effects of untreated hospital effluents on the accumulation of toxic metals in sediments of receiving system under tropical conditions: Case of South India and Democratic Republic of Congo

Physicochemical and ecotoxicological analyses have been performed to assess the quality of sediments receiving untreated hospital effluents from Indian and Democratic Republic of Congo (DRC) hospitals. The sediments were collected monthly and characterized for grain size, organic matter, total organic carbon, total carbon, nitrogen, phosphorus, toxic metals and ecotoxicity. The results highlight the high concentration of toxic metals from the Indian hospital effluent receiving systems, especially for Cr, Cu, As, Zn and Hg. On the other hand, the metal concentrations in the sediment receiving system from DRC are low (e.g. maximum Hg and Zn concentration were 0.46 and 48.84 mg kg⁻¹ respectively). Ostracods exposed to sediment samples H2 (September month sample) and H3 (June and September month samples) were found dead after 6 d of exposure whereas the higher mortality rate for Congo sediments was 23% but was accompanied with 33 ± 7% of growth inhibition. The results of this study show the variation of sediment composition on toxic metal levels as well as toxicity related to both, the type of hospitals and the sampling period. Additionally, hospital effluent disposal practices at the study sites can lead to the pollution of water resources and may generate risks for aquatic organisms and human health.     

Comparative tolerance of Pinus radiata and microbial activity to copper and zinc in a soil treated with metal-amended biosolids

A study was conducted to evaluate the effects of elevated concentrations of copper (Cu) and zinc (Zn) in a soil treated with biosolids previously spiked with these metals on Pinus radiata during a 312-day glasshouse pot trial. The total soil metal concentrations in the treatments were 16, 48, 146 and 232 mg Cu/kg or 36, 141, 430 and 668 mg Zn/kg. Increased total soil Cu concentration increased the soil solution Cu concentration (0.03–0.54 mg/L) but had no effect on leaf and root dry matter production. Increased total soil Zn concentration also increased the soil solution Zn concentration (0.9–362 mg/L). Decreased leaf and root dry matter were recorded above the total soil Zn concentration of 141 mg/kg (soil solution Zn concentration, >4.4 mg/L). A lower percentage of Cu in the soil soluble?+?exchangeable fraction (5–12 %) and lower Cu²⁺ concentration in soil solution (0.001–0.06 μM) relative to Zn (soil soluble?+?exchangeable fraction, 12–66 %; soil solution Zn²⁺ concentration, 4.5–4,419 μM) indicated lower bioavailability of Cu. Soil dehydrogenase activity decreased with every successive level of Cu and Zn applied, but the reduction was higher for Zn than for Cu addition. Dehydrogenase activity was reduced by 40 % (EC₄₀) at the total solution-phase and solid-phase soluble?+?exchangeable Cu concentrations of 0.5 mg/L and 14.5 mg/kg, respectively. For Zn the corresponding EC₅₀ were 9 mg/L and 55 mg/kg, respectively. Based on our findings, we propose that current New Zealand soil guidelines values for Cu and Zn (100 mg/kg for Cu; 300 mg/kg for Zn) should be revised downwards based on apparent toxicity to soil biological activity (Cu and Zn) and radiata pine (Zn only) at the threshold concentration.     

Non-linear regression model for spatial variation in precipitation chemistry for South India

Chemical composition of rainwater changes from sea to inland under the influence of several major factors – topographic location of area, its distance from sea, annual rainfall. A model is developed here to quantify the variation in precipitation chemistry under the influence of inland distance and rainfall amount. Various sites in India categorized as ‘urban’, ‘suburban’ and ‘rural’ have been considered for model development. pH, HCO₃, NO₃ and Mg do not change much from coast to inland while, SO₄ and Ca change is subjected to local emissions. Cl and Na originate solely from sea salinity and are the chemistry parameters in the model.Non-linear multiple regressions performed for the various categories revealed that both rainfall amount and precipitation chemistry obeyed a power law reduction with distance from sea. Cl and Na decrease rapidly for the first 100 km distance from sea, then decrease marginally for the next 100 km, and later stabilize. Regression parameters estimated for different cases were found to be consistent (R² ～ 0.8). Variation in one of the parameters accounted for urbanization. Model was validated using data points from the southern peninsular region of the country. Estimates are found to be within 99.9% confidence interval.Finally, this relationship between the three parameters – rainfall amount, coastline distance, and concentration (in terms of Cl and Na) was validated with experiments conducted in a small experimental watershed in the south-west India. Chemistry estimated using the model was in good correlation with observed values with a relative error of ～5%. Monthly variation in the chemistry is predicted from a downscaling model and then compared with the observed data. Hence, the model developed for rain chemistry is useful in estimating the concentrations at different spatio-temporal scales and is especially applicable for south-west region of India.     

Advanced design techniques in passive and active tubular solar stills: a review

Environmental Science and Pollution Research - Clean water production using green energy supply plays a significant role in the globe’s health and economic development. In recent years, so...