Printed wiring boards for mobile phones: characterization and recycling of copper

The popularization of mobile phones, combined with a technological evolution, means a large number of scrap and obsolete equipment are discarded every year, thereby causing economic losses and environmental pollution. In the present study, the printed wiring boards scrap of mobile phones were characterized in order to recycle some of the device components, using techniques of mechanical processing, hydrometallurgy and electrometallurgy. The use of the techniques of mechanical processing (milling, particle size classification, magnetic and electrostatic separation) was an efficient alternative to obtain a concentrated fraction (mainly iron in the magnetic fraction and copper in the conductive fraction) and another fraction containing polymers and ceramics. At the end of mechanical processing, a concentrated fraction of metals could be obtained with an average concentration of 60% copper. This concentrated fraction in metals was dissolved in aqua regia and sent to electrowinning to recover 92% of the dissolved copper. The obtained cathodes have a copper content above 95%, which demonstrates the technical feasibility of recovery of copper using the techniques of mechanical processing, hydrometallurgy and electrometallurgy.     

Utilization of magnetic and electrostatic separation in the recycling of printed circuit boards scrap

The progress of the technology is directly related to the growth of production and consumption of electrical/electronics equipment, especially of personal computers. This type of equipment has a relatively short average lifetime, 2-3 years. The amount of defective or obsolete equipment has been increasing substantially; consequently its disposition and/or recycling should be studied. In this work, printed circuit boards, which are used in personal computers, were studied in order to recover the metals in the circuit boards through mechanical processing, such as crushing, screening, as well as magnetic and electrostatic separation. The results obtained demonstrate the feasibility of using these processes to separate metal fractions from polymers and ceramics, and that it is possible to obtain a fraction concentrated in metals containing more than 50% on average of copper, 24% of tin and 8% of lead.     

环境中的药物——LC-MS/MS分析地表水和地下水

成百上千的活性物质正被用于人药和兽药处方中.由于药物的广泛应用,它们的残留物可通过多种途径进入环境.虽然主要通过尿和粪便的排泄,但是药品生产中的排放也应被考虑.当抗生素用于水产业,就会产生更直接的影响.污水处理设备不能完全除去药物,因此药物会出现在地表和地下水样品中.近年来,人们对环境中药物的兴趣正在增加,需要建立一种快速、灵敏、有选择性的方法来分析水样.     

The validation analysis of the INSHORE system��a precise and efficient coastal survey system

Government and environmental entities are becoming increasingly concerned with qualifying and quantifying the erosion effects that are observed in sandy shores. Correspondingly, survey methodologies that gather data for such erosion studies are increasingly being demanded. The responsible entities are continually broadening their areas of interest, are concerned in the establishment of regular monitoring programmes and are demanding high accuracy from the geo-spatial data that is collected. The budget available for such monitoring activities, however, does not parallel the trend in the increasing demand for quality specifications. Survey methodologies need improvement to meet these requirements. We have developed a new land-based survey system--the INSHORE system--that is ideal for low cost, highly efficient and highly precise coastal surveys. The INSHORE system uses hi-tech hardware that is based on high-grade global positioning system (GPS) receivers and a laser distance sensor combined with advanced software algorithms. This system enables the determination of the ground coordinates of the surveyed areas with a precision of 1 to 2 cm, without having a sensor in contact with the ground surface. The absence of physical contact with the ground makes this system suitable for high-efficiency surveys. The accuracy of the positioning, which is based on advanced differential GPS processing, is enhanced by considering the estimated attitude of the GPS receiver holding structure and eliminates undesirable offsets. This paper describes the INSHORE survey system and presents the results of validation tests that were performed in a sandy shore environment.     

Collection and recycling of electronic scrap: a worldwide overview and comparison with the Brazilian situation

Recycling and the related issue of sustainable development are increasing in importance around the world. In Brazil, the new National Policy on Solid Wastes has prompted discussion on the future of electronic waste (e-waste). Over the last 10 years, different e-waste collection systems and recycling processes have been applied globally. This paper presents the systems used in different countries and compares the world situation to the current Brazilian reality. To establish a recycling process, it is necessary to organize efficient collection management. The main difficulty associated with the implementation of e-waste recycling processes in Brazil is the collection system, as its efficiency depends not only on the education and cooperation of the people but also on cooperation among industrial waste generators, distributors and the government. Over half a million waste pickers have been reported in Brazil and they are responsible for the success of metal scrap collection in the country. The country also has close to 2400 companies and cooperatives involved in recycling and scrap trading. On the other hand, the collection and recycling of e-waste is still incipient because e-wastes are not seen as valuable in the informal sector. The Brazilian challenge is therefore to organize a system of e-waste management including the informal sector without neglecting environmentally sound management principles.     

Evaluation of gold and silver leaching from printed circuit board of cellphones

Electronic waste has been increasing proportionally with the technology. So, nowadays, it is necessary to consider the useful life, recycling, and final disposal of these equipment. Metals, such as Au, Ag, Cu, Sn and Ni can be found in the printed circuit boards (PCB). According to this, the aims of this work is to characterize the PCBs of mobile phones with aqua regia; obtaining “reference” values of leaching, to gold and silver, with cyanide and nitric acid, respectively; and study the process of leaching of these metals in alternative leaching with sodium thiosulfate and ammonium thiosulfate. The metals were characterized by digesting the sample with aqua regia for 1 and 2 h at 60 °C and 80 °C. The leaching of Au with a commercial reagent (cyanide) and the Ag with HNO₃were made. The leaching of Au and Ag with alternative reagents: Na₂S₂O_3, and (NH₄)₂S₂O₃ in 0.1 M concentration with the addition of CuSO₄, NH₄OH, and H₂O₂, was also studied. The results show that the digestion with aqua regia was efficient to characterize the metals present in the PCBs of mobile phones. However, the best method to solubilize silver was by digesting the sample with nitric acid. The leaching process using sodium thiosulfate was more efficient when an additional concentration of 0.015 and 0.030 M of the CuSO₄ was added.     

Application of Fenton's reagent to regenerate activated carbon saturated with organochloro compounds

In this work Fenton's reagent was used to treat activated carbon saturated with organochloro compounds for the oxidation of the adsorbed contaminants and the regeneration of the carbon adsorbent. Activated carbon containing adsorbed chlorinated model substrates such as chlorobenzene, tetrachloroethylene, chloroform or 1,2-dichloropropane was treated with Fenton's reagent at room temperature resulting in a rapid consumption of the organochloro compounds. Thermogravimetric, infrared, BET surface area and MIMS adsorption studies showed that Fenton's treatment has no significant effect on the physico-chemical properties of the activated carbon. The used carbon adsorbents can be efficiently regenerated and recycled with no loss of its adsorption capacity even after five consecutive treatments with Fenton's reagent.     

Tributyltin chloride disrupts aortic vascular reactivity and increases reactive oxygen species production in female rats

Environmental Science and Pollution Research - Organotin compounds, such as tributyltin (TBT), are environment contaminants that induce bioaccumulation and have potential toxic effects on marine...     

A case study on the influence of beach kiosks on marine litter accumulating in Camboinhas beach,Southeast Brazil

Macroplastics are well known to be highly hazardous for marine wildlife, as well as being the most frequently encountered type of marine litter. The main objective of this work was to address the impact of beach kiosk presence on the occurrence of marine debris in a highly frequented beach in Southeast Brazil. For this work, three areas close to kiosks and three areas distant from kiosks were chosen for sampling and comparison. We conducted three transects at each location, each one including two meters of vegetation, from which debris was collected. Samples were taken to the laboratory so that they could be weighed and the debris was classified according to material. Our results show that, in every scenario, plastic was the most frequently found material. In addition, the amount of paper was found to be higher in areas close to kiosks. Presence of kiosks does not have an overall direct impact on the amount of litter. However, we found vegetated areas to have significantly higher volumes of debris, both in areas with and without beach kiosks.