Wave forces on submarine pipelines near a plane boundary

Forces induced by regular waves on submarine pipelines resting on as well as near a plane boundary and aligned parallel to wave fronts of the oncoming waves are investigated experimentally. The inline hydrodynamic coefficients of drag and inertia are evaluated through the use of Morison equation and the least squares method. The transverse force is analysed in terms of maximum transverse force and transverse root mean square (r.m.s.) coefficients. The resulting inline and transverse hydrodynamic coefficients are correlated with the period parameter or Keulegan-Carpenter number and relative clearance of the pipeline from the plane boundary. The effect of depth parameter on these coefficients and the correlation between maximum transverse force and transverse r.m.s. coefficients are also reported.     

The origin and biogeochemistry of organic matter in surface sediments of Lake Shihwa and Lake Hwaong

To understand the origin and biogeochemistry of the organic matter in surface sediments of Lake Shihwa and Lake Hwaong, organic nitrogen, inorganic nitrogen, labile organic carbon, and residual organic carbon contents as well as stable isotope ratios for carbon and nitrogen were determined by KOBr-KOH treatment. Ratios of organic carbon to organic nitrogen (C_org/N_org) (mean = 24) were much higher than ratios of organic carbon to total nitrogen (C_org/N_tot) (mean=12), indicating the presence of significant amounts of inorganic nitrogen in the surface sediments of both lakes. Stable isotope ratios for organic nitrogen were, on average, 5.2‰ heavier than ratios of inorganic nitrogen in Lake Shihwa, but those same ratios were comparable in Lake Hwaong. This might be due to differences in the origin or the degree of degradation of sedimentary organic matter between the two lakes. In addition, stable isotope ratios for labile organic carbon were, on average, 1.4‰ heavier than those for residual organic carbon, reflecting the preferential oxidation of¹³C-enriched organic matter. The present study demonstrates that KOBr-KOH treatment of sedimentary organic matter can provide valuable information for understanding the origin and degradation state of organic matter in marine and brackish sediments. This also suggests that the ratio of C_org/N_org and stable isotope ratios for organic nitrogen can be used as indexes of the degree of degradation of organic matter.     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

Rb-Sr and K-Ar systems of biotite in surface environments regulated by weathering processes with implications for isotopic dating and hydrological cycles of Sr isotopes

Biotite is widely used for Rb-Sr and K-Ar isotopic dating and influences Sr isotope geochemistry of hydrological regimes. The isotopic system of biotite behaves diversely in response to surface weathering; i.e. the complete preservation of original Rb-Sr and K-Ar isotopic ages or dramatic reduction. In this study, we have explored the relation between the behavior of isotopic systems and complex weathering processes of biotites in the weathering profiles distributed on the Mesozoic granitoids in South Korea. In the lower parts of the profiles, biotite in the early stages of weathering was transformed into either oxidized biotite or hydrobiotite, with a mass release of ⁸⁷Sr and ⁴⁰Ar forced by the rapid oxidation of ferrous iron. During the transformation to oxidized biotite, ⁸⁷Sr and ⁴⁰Ar were preferentially released relative to Rb and K, respectively, via solid-state diffusion through the biotite lattice, resulting in a drastic reduction of original isotopic age. The reduction of Rb-Sr age was greater than that of K-Ar age because K was preferentially released over Rb whereas ⁸⁷Sr and ⁴⁰Ar were released proportionally to each other. However, during the transformation of biotite to hydrobiotite (i.e., to regularly interstratified biotite-vermiculite), ⁸⁷Sr, Rb, ⁴⁰Ar, and K were completely retained in the alternating biotite interlayer, and thus the original isotopic age can be preserved. In the upper parts of the profiles, where iron oxidation was almost completed, ⁸⁷Sr, Rb, ⁴⁰Ar, and K were gradually and proportionally released, with no further significant change in isotopic age during the gradual transformation of the early-formed oxidized biotite into hydrobiotite and vermiculite or during their final decomposition to kaolinite. The ratios and amounts of isotopes released from weathered biotites are dependent upon the degree of iron oxidation and the pathways of mineralogical transformation. Regional and local variations in isotopic systems affected by particular weathering processes should be considered when dating biotite or biotite-bearing rocks in weathering environments, modeling the transfer of Sr isotopes to hydrologic regimes, and tracking the provenance of sediments.     

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.     

Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst

Hydrometallurgical processing of spent hydrodesulphurisation (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixtures was investigated. The results indicated that the recovery of molybdenum was largely dependent on the concentrations of Na₂CO₃ and H₂O₂ in the reaction medium, which controls the acidity of the leach liquor and carry over of impurities such as Al, Ni, P, Si and V. Leaching process was exothermic and leaching efficiency of molybdenum decreased with increasing solid to liquid ratio. Large scale leaching of spent catalyst, under optimum conditions: 20% pulp density, 85 g/L Na₂CO₃, 10 vol.% H₂O₂ and 1 h reaction, resulted a leaching efficiency of 84% Mo. The obtained leach liquor contained (g/L): Mo — 22.0, Ni — 0.015 and Al — 0.82, P — 1.1, Si — 0.094 and minor quantities of V — 8 mg/L, As and Co — < 1 mg/L. Recovery of Mo from leach solution as MoO₃ of 97.30% purity was achieved by ammonium molybdate precipitation method.     

Yeosu dinosaur track sites of Korea: The youngest dinosaur track records in Asia

Eighty two dinosaur trackways were newly discovered in Upper Cretaceous lacustrine deposits on islands in the vicinity of Yeosu, Korea. Most dinosaur tracks occur in marginal lake deposits with polygonal desiccation cracks. The dinosaur tracks at the Yeosu site include 65 ornithopod trackways, 16 theropod trackways and one sauropod trackway. The prevalence of ornithopod tracks and the limited occurrence of sauropod tracks at the Yeosu site evidently reflect decreased sauropod diversity in the Upper Cretaceous. All ornithopod trackways represent bipeds, and most of the ornithopod tracks are similar to Caririchnium from other sites of the Korean peninsula. All fossil wood specimens collected in the study area represent conifers (three species of cupressaceous and two species of taxodiaceous conifers, and a new species) except for one, which is a discotyledon. It is thus inferred that the southwestern part of the Korean Peninsula was primarily covered with mesic forests with taxodiaceous trees during the Late Cretaceous. The K–Ar age of the Yeosu tracksite is determined as 81–65 Ma (Camapnian to Maastrichtian). It indicates that the Yeosu track site contains the last records of dinosaurs living in Asia. Consequently, semi-arid palaeoclimatic conditions, together with a large lake as a persistent water source and rich vegetation of gymnosperm trees as food, resulted in the preservation of abundant dinosaur tracks in the Upper Cretaceous on the Korean Peninsula.     

Seismic analysis of base-isolated liquid storage tanks using the BE–FE–BE coupling technique

A three-dimensional soil–structure–liquid interaction problem is numerically simulated in order to analyze the dynamic behavior of a base-isolated liquid storage tank subjected to seismic ground motion. A dynamic analysis of a liquid storage tank is carried out using a hybrid formulation, which combines the finite shell elements for structures and the boundary elements for liquid and soil. The system is composed of three parts: the liquid–structure interaction part, the soil–foundation interaction part, and the base-isolation part. In the liquid–structure interaction part, the tank structure is modeled using the finite elements and the liquid is modeled using the internal boundary elements, which satisfy the free surface boundary condition. In the soil–foundation interaction part, the foundation is modeled using the finite elements and the half-space soil media are modeled using the external boundary elements, which satisfy the radiation condition in the infinite domain. Finally, above two parts are connected with the base-isolation system to solve the system's behavior. Numerical examples are presented to demonstrate the accuracy of the developed method, and an earthquake response analysis is carried out to demonstrate the applicability of the developed technique. The properties of a real LNG tank located in the west coast of Korea are used. The effects of the ground and the base-isolation system on the behavior of the tank are analyzed.