Alignment between luminous red galaxies and surrounding structures at z∼ 0.5

We analyse a high-redshift sample (0.4 < z < 0.5) of luminous red galaxies (LRGs) extracted from the Sloan Digital Sky Survey data release 4 and their surrounding structures to explore the presence of alignment effects of these bright galaxies with neighbour objects. In order to avoid projection effects, we compute photometric redshifts for galaxies within 3  h ⁻¹ Mpc in projection of LRGs and calculate the relative angle between the LRG major axis and the direction to neighbours within 1000 km s⁻¹. We find a clear signal of alignment between LRG orientations and the distribution of galaxies within 1.5  h ⁻¹ Mpc. The alignment effects are present only for the red population of tracers; LRG orientation is uncorrelated to the blue population of neighbour galaxies. These results add evidence to the alignment effects between primaries and satellites detected at low redshifts. We conclude that such alignments were already present at z ∼ 0.5.     

Petrogenesis and tectonic significance of Jurassic IAT magma types in the Hellenide ophiolites as deduced from the Rhodiani ophiolites (Pelagonian zone, Greece)

The Rhodiani ophiolites are represented by two tectonically superimposed ophiolitic units: the “lower” Ultramafic unit and the “upper” Volcanic unit, both bearing calcareous sedimentary covers. The Ultramafic unit consists of mantle harzburgites with dunite pods and chromitite ores, and represents the typical mantle section of supra-subduction zone (SSZ) settings. The Volcanic unit is represented by a sheeted dyke complex overlain by a pillow and massive lava sequence, both including basalts, basaltic andesites, andesites, and dacites. Chemically, the Volcanic unit displays low-Ti affinity typical of island arc tholeiite (IAT) ophiolitic series from SSZ settings, having, as most distinctive chemical features, low Ti/V ratios (< 20) and depletion in high field strength elements and light rare earth elements.The rare earth element and incompatible element composition of the more primitive basaltic andesites from the Rhodiani ophiolites can be successfully reproduced with about 15% non-modal fractional melting of depleted lherzolites, which are very common in the Hellenide ophiolites. The calculated residua correspond to the depleted harzburgites found in the Rhodiani and Othrys ophiolites. Both field and chemical evidence suggest that the whole sequence of the Rhodiani Volcanic unit (from basalt to dacite) originated by low-pressure fractional crystallization under partially open-system conditions. The modelling of mantle source, melt generation, and mantle residua carried out in this paper provides new constraints for the tectono-magmatic evolution of the Mirdita–Pindos oceanic basin.     

Models of natural and human dynamics in forest landscapes: Cross-site and cross-cultural synthesis

We synthesize the study of coupled natural and human systems across sites and cultures through a process of simplification and abstraction based on multiple dimensions of human-nature connectedness: satisfaction of basic needs, psycho-cultural connectedness and regulation of use of natural resources. We thus provide both a place-based and general understanding of value-driven anthropogenic environmental change and response. Two questions guide this research: what are the crucial stakeholder values that drive land use decisions and thus land cover change? And how can knowledge of these values be used to make decisions and policies that sustain both the human and natural systems in a place? To explore these questions we build simulation models of four study sites, two in the State of Texas, United States, and two in Venezuela. All include protected areas, though they differ in the specifics of vegetation and land use. In the Texas sites, relatively affluent individuals are legally converting forests to residential, commercial, and industrial uses, while in Venezuela landless settlers are extra-legally converting forests for purposes of subsistence agriculture. Contemporary modeling techniques now facilitate simulations of stakeholder and ecosystem dynamics revealing emergent patterns. Such coupled human and natural systems are currently recognized as a form of biocomplexity. Our modeling framework is flexible enough to allow adaptation to each of the study sites, capturing the essential features of the respective natural and anthropogenic land use changes and stakeholder reactions. The interactions between human stakeholders are simulated using multi-agent models that act on forest landscape models, and receive feedback of the effects of these actions on ecological habitats and hydrological response. The multi-agent models employ a formal logic-based method for the Venezuelan sites and a decision analysis approach using multi-attribute utility functions for the Texas sites, differing more in style and emphasis than in substance. Our natural-systems models are generic and can be tailored according to site-specific conditions. Similar models of tree growth and patch transitions are used for all the study sites and the differing responses to environmental variables are specified for each local species and terrain conditions.     

New paleomagnetic result from the Ethiopian flood basalts in the Abbay (Blue Nile) and Kessem gorges

New paleomagnetic investigations on the Ethiopian trap series have been undertaken at the Abbay and Kessem gorges in an attempt to better constrain the 30 Ma paleomagnetic pole of Africa. We sampled six thick massive basaltic lava flows, totaling 230 m, from Abbay Gorge and 10 lava flows, 180 m in thickness, from Kessem Gorge. Detailed paleomagnetic analyses disclosed that the carriers of the characteristic remanent magnetization (ChRM) are different in different lava flows. These are mostly titanomagnetites, titanomaghemites, and magnetite minerals with a broad range of coercive force and blocking temperatures. The heating and cooling susceptibility vs. temperature curves, many of which are irreversible, may indicate chemical remagnetization, notably low temperature maghemitization. Only one flow (KS04) with a clear 580°C Curie temperature was apparently unaffected by chemical remagnetization. The ChRM direction of this flow is identical to that in other flows, which suggests that if and when remagnetization occurred, this was shortly after emplacement of the lava flows. All of the flows sampled have normal polarity. However, a reversed component of low to medium coercive force and low to medium unblocking temperature occurs in flow KS01 at Kessem Gorge. The ChRM directions for the 16 sites are D=3.1°, I=5.8° (α₉₅=12.7°). The paleomagnetic pole obtained from these is at λ=83.0°N, φ=193.3°E (A₉₅=9.0°). Comparison with three previous studies of the traps shows remarkable consistency and a number of means are derived and discussed. Two final preferred poles for the traps are at λ=79.0°N, φ=196.9°E (A₉₅=2.8°) when all 112 published flows are used, and λ=78.7°N, φ=209.4°E (A₉₅=3.4°) when only the 76 flows from the four more recently analyzed sections are included. Both are compatible with the recent reference synthetic pole for Africa of Courtillot and Besse [J. Geophys. Res. (2002) in press]. In that sense, the Ethiopian trap pole is not anomalous and does not require more of a non-dipolar contribution than indicated by analyses of the global paleomagnetic data base covering the last few million years.     

Quantitative imaging of complex structures from dense wide-aperture seismic data by multiscale traveltime and waveform inversions: a case study

An integrated multiscale seismic imaging flow is applied to dense onshore wide‐aperture seismic data recorded in a complex geological setting (thrust belt). An initial P‐wave velocity macromodel is first developed by first‐arrival traveltime tomography. This model is used as an initial guess for subsequent full‐waveform tomography, which leads to greatly improved spatial resolution of the P‐wave velocity model. However, the application of full‐waveform tomography to the high‐frequency part of the source bandwidth is difficult, due to the non‐linearity of this kind of method. Moreover, it is computationally expensive at high frequencies since a finite‐difference method is used to model the wave propagation. Hence, full‐waveform tomography was complemented by asymptotic prestack depth migration to process the full‐source bandwidth and develop a sharp image of the short wavelengths. The final traveltime tomography model and two smoothed versions of the final full‐waveform tomography model were used as a macromodel for the prestack depth migration. In this study, wide‐aperture multifold seismic data are used. After specific preprocessing of the data, 16 frequency components ranging from 5.4 Hz to 20 Hz were inverted in cascade by the full‐waveform tomography algorithm. The full‐waveform tomography successfully imaged SW‐dipping structures previously identified as high‐resistivity bodies. The relevance of the full‐waveform tomography models is demonstrated locally by comparison with a coincident vertical seismic profiling (VSP) log available on the profile. The prestack depth‐migrated images, inferred from the traveltime, and the smoothed full‐waveform tomography macromodels are shown to be, on the whole, consistent with the final full‐waveform tomography model. A more detailed analysis, based on common‐image gather computations, and local comparison with the VSP log revealed that the most accurate migrated sections are those obtained from the full‐waveform tomography macromodels. A resolution analysis suggests that the asymptotic prestack depth migration successfully migrated the wide‐aperture components of the data, allowing medium wavelengths in addition to the short wavelengths of the structure to be imaged. The processing flow that we applied to dense wide‐aperture seismic data is shown to provide a promising approach, complementary to more classical seismic reflection data processing, to quantitative imaging of complex geological structures.     

Magma generation and crustal accretion as evidenced by supra-subduction ophiolites of the Albanide–Hellenide Subpelagonian zone

Abstract Ophiolites of the Mirdita–Subpelagonian zone form a nearly continuous belt in the Albanide–Hellenide orogen, including mid‐ocean ridge basalt (MORB) associations in the western Mirdita sector and supra‐subduction zone (SSZ) complexes, with prevalent island arc tholeiitic (IAT) and minor boninitic affinities in the eastern part of the belt (i.e. eastern Mirdita, Pindos, Vourinos). In addition, basalts with geochemical features intermediate between MORB and IAT (MORB/IAT) are found in the central Mirdita and in the Aspropotamos sequence (Pindos). These basalts alternate with pure MORB and are cut by boninitic dykes. The distinctive compositional characteristics of the mafic magmas parental to the different ophiolitic suites can be accounted for by partial melting of mantle sources progressively depleted by melt extractions. Partial melting processes (10–20%) of lherzolitic sources generated pure MORB, leaving clinopyroxene‐poor lherzolite as a residuum. Approximately 10% water‐assisted partial melting of this latter source, in an SSZ setting, may in turn generate basalts with MORB/IAT intermediate characteristics, whereas IAT basalts and boninites may have been derived from 10–20% and 30% partial melting, respectively, of the same source variably enriched by subduction‐derived fluids. In addition, boninites may also have been derived by comparatively lower degrees of hydrated partial melting of more refractory harzburgitic sources. A generalized petrologic model based on mass balance calculations between bulk rock and mineral compositions, indicate that most of the intrusives (from ultramafic cumulates to gabbronorites and plagiogranites), as well as sheeted dykes and volcanics (from basalts to rhyodacites) forming the bulk crustal section of the SSZ ophiolites, may be accounted for by shallow fractional crystallization from low‐Ti picritic parental magmas very similar in composition to IAT picrites from Pacific intraoceanic arcs. The most appropriate tectono‐magmatic model for the generation of the SSZ Tethyan ophiolites implies low velocity plate‐convergence of the intraoceanic subduction and generation of a nascent arc with IAT affinity and progressive slab roll‐back, mantle diapirism and extension from the arc axis to the forearc region, with generation of MORB/IAT intermediate basalts and boninitic magmas.     

Upper Cretaceous marine‐continental transition (Leonese Area,NW Spain) defined from integrated outcrop and seismic stratigraphy

The Upper Cretaceous succession of the Leonese Area (NW Spain) comprises mixed clastic and carbonate sediments. This succession is divided into two lithostratigraphic units, the Voznuevo Member and the Boñar Formation, which represent fluvial, shoreface, intertidal, subtidal and open‐shelf sedimentary environments. Regional seismic interpretation and sequence stratigraphic analysis have allowed the study of lateral and vertical changes in the sedimentary record and the definition of third‐order levels of stratigraphic cyclicity. On the basis of these data, the succession can be divided into two second‐order depositional sequences (DS‐1 and DS‐2), incorporating three system tracts in a lowstand to transgressive to highstand system tract succession (LST–TST–HST). These sequences are composed of fluvial systems at the base with palaeocurrents that flowed westward and south‐westward. The upper part of DS‐1 (Late Albian–Middle Turonian) shows evidence of intertidal to subtidal and offshore deposits. DS‐2 (Late Turonian–Campanian) comprises intertidal to subtidal, tidal flat, shallow marine and lacustrine deposits and interbedded fluvial deposits. Two regressive–transgressive cycles occurred in the area related to eustatic controls. The evolution of the basin can be explained by base‐level changes and associated shifts in depositional trends of successive retrogradational episodes. By using isobath and isopach maps, the main palaeogeographic features of DS‐1 and DS‐2 were constrained, namely coastline positions, the existence and orientation of corridors through which fluvial networks were channelled and the location of the main depocentres of the basin. Sedimentation on the Upper Cretaceous marine platform was mainly controlled by (i) oscillations of sea level and (ii) the orientation of Mesozoic faults, which induced sedimentation along depocentres. Copyright © 2013 John Wiley & Sons, Ltd.