Interaction between atmospheric flows and obstacles: Experiments in a rotating channel

We performed an experimental study using scale models in a hydrodynamic rotating channel, concerning the interactions between fluid flows and obstacles of different shapes. The study was meant to analyze the characteristics of the wakes observed on the lee side of quasi-bidimensional obstacles, in a neutral atmosphere.The obstacles were half-cylinders (with aspect ratio 0.87), placed transversally on the channel bottom and totally submerged in the fluid. We call them quasi-bidimensional since their width was a little smaller than the channel width, thus allowing the flow to partially go round their edges.The simulations were performed in the rotating hydraulic channel of ICG-CNR in Turin, and included various conditions of rotation period and flow speed. An interesting behaviour of the wakes was found on the lee side of subsynoptic-scale obstacles, modelled in conditions of Reynolds-Rossby similitude. More precisely, if a given threshold of flow velocity is exceeded, wake size is constant and is fully determined by the height of the obstacle.     

Acoustic sounding of land and sea breezes

Sodar measurements have been made at La Spezia, Italy during land- and sea-breeze conditions. The backscatter returns are discussed qualitatively, including their relation to the vertical structure of the boundary layer as revealed by vertical soundings of wind and temperature. During inversion conditions, the sodar signals may be difficult to interpret especially when there is a land breeze flowing over irregular terrain.     

A laboratory simulation of mesoscale flow interaction with the Alps

A series of laboratory experiments, aimed at the simulation of some aspects of Alpine lee cyclogenesis has been carried out in the rotating tank of the Coriolis Laboratory of LEGI-IMG in Grenoble. Dynamic and thermodynamic processes, typical of baroclinic development triggered by the orography, were simulated. The background flow simulating the basic state of the atmosphere consisted of a stream of intermediate density fluid introduced at the interface between two fluid layers. The structure of the intermediate current was established by mixing fluid obtained from the upper layer of fresh water with fluid removed from the heavier salty layer below.The dynamical similarity parameters are the Rossby (Ro), Burger (Bu) and Ekman (Ek) numbers, although this last, owing to its small values, need not be matched between model and prototype, since viscous effects are not important for small time scales. The flow in both the prototype and laboratory simulation is characterized by hydrostatics; this requires (Ro²δ²/Bu)1 (where δ=H/L is the aspect ratio of the obstacle) which is clearly satisfied, in the atmosphere and oceans, and for the laboratory experiment.A range of experiments for various Rossby and Burger numbers were conducted which delimited the region of parameter space for which background flows akin to that found to the northwest of the Alps prior to baroclinic cyclogenesis events, were observed.One such experiment was carried out by placing a model of the Alps at the appropriate place in the flow field. The subsequent motion in the laboratory was observed and dye tracer motions were used to obtain the approximate particle trajectories. The density field was also analyzed to provide the geopotential field of the simulated atmosphere. Using standard transformations from the similarity analysis, the laboratory observations were related to the prototype atmosphere. The flow and the geopotential fields gave results compatible with the particular atmospheric event presented.     

A wind-speed anomaly in the surface layer in the Po Valley

A wind anomaly, consisting of a relative minimum in speed at a height of 100 m, in a direction opposite to that of the local flows, has been observed on the meteorological tower of Trino Vercellese, at the western extremity of the Po Valley. An interpretation in terms of a thermal wind, due to an horizontal thermal gradient induced by sloping terrain close to the site, is suggested.     

旋转扰动流体中壁面湍流不稳定及其拟序结构研究Ⅱ：数值模式

对第一部分的实验结果进行了讨论,指出局地最大、最小涡度的存在与所谓的正压不稳定和大气中经常观测到的滚动涡有关。速度廓线中的拐点和涡度极大值点对应不稳定发展的位置。另外,为了改进湍流的模拟,根据“准正则”近似,发展了一个三阶闭合模式。这个模型已被证明可以描述与湍流过程有关的流体动力学变量的趋势。     

1999年欧洲圣诞节风暴数值模拟分析

对1999年圣诞期间发生在欧洲中西部的圣诞节风暴进行了分析,认为4个主要的低气压系统中的第二个给法国北部带来了强风暴雨,巴黎的Orly机场阵风速度〉47m／s;第四个低压系统沿法国西海岸产生相似的恶劣天气,并在西班牙的北部海岸及地中海沿岸国家造成了毁灭性的破坏。在法国中部风暴最剧烈的时候,最大阵风〉41m／s;在法国和德国之间的区域,达55m／s。圣诞节风暴造成欧洲国家大约140人死亡,其他损失包括树木、街道和房屋被毁,电力系统和电话中断时间长达数天,受影响的人数大约为1000万,财产损失大约为80亿美元。由于风暴的极端强度和快速发展速度,欧洲大多数国家的数值预报中心没有对这次剧烈天气提供足够的预警。为此,利用中尺度数值预报系统（RAMS）模拟圣诞节风暴,并与ECMWF分析资料以及实况观测资料进行了对比分析。结果表明,RAMS模式能够准确模拟风暴的主要特性、低气压的演变和位置移动、发展的关键时间点、风暴演化期间的平均风场;模拟的平均风场和气象观测网的观测结果相一致;模拟的风暴移动时间和主要新闻媒体的报道相吻合;模式计算的一些特定地区平均风速的时间趋势显示,在阿尔卑斯山脉地区,无论是上风区还是下风区,风暴的时间都被准确地预测;模拟的第一次风暴最低气压值较实际值偏低。     

旋转扰动流体中壁面湍流不稳定及其拟序结构研究Ⅰ:实验

重点介绍和讨论了中性条件下旋转扰动流体中边界层强迫不稳定及其相关的一些问题,阐述了旋转体系中切变驱动边界层不稳定的动力学特征.这些不稳定状态的研究在大气物理学、流体动力学、海洋学等多个领域中引起科学家极大的兴趣,近年来在实验和理论研究中都得到了不断的发展.意大利都灵大学基础物理系地球科学实验组通过水槽旋转实验方法,不断改变水槽启动或结束时的旋转运动速度,以及底部壁面粗糙度等要素,所得到的实验结果与SDBL理论非常一致.     

A Wind-Speed Anomaly in the Surface Layer in the Po Valley

A wind anomaly, consisting of a relative minimum in speed at a height of 100 m, in a direction opposite to that of the local flows, has been observed on the meteorological tower of Trino Vercellese, at the western extremity of the Po Valley. An interpretation in terms of a thermal wind, due to an horizontal thermal gradient induced by sloping terrain close to the site, is suggested.     

A study of the performance of a land surface process model (LSPM)

In this paper, a reliable Land-Surface Process Model (LSPM), which is a new version of the LPM of Ji and Hu (1989), is described. The LSPM has been validated with experimental data measured at two stations in the Po Valley (Northern Italy).     

Boundary-Layer Stress Instabilities in Neutral,Rotating Turbulent Flows

Boundary-layer instabilities are studied by analyzing the results of laboratory simulations of wall turbulence in a shear-driven rotating flow. The experiments were carried out in the Turin University Laboratory rotating water tank, where a circular flow was generated by either increasing (spin-up) or decreasing (spin-down) the rotation speed of the platform. The flow was measured using a Particle Image Velocimetry technique and the developed turbulence analyzed. Two cases were accounted for, in the former the measurements were performed over a smooth surface (bottom of the tank), while in the latter a rough-to-smooth transition was considered. The turbulent boundary layer developed inside the tank is analyzed by means of vertical profiles of mean and turbulent quantities and on the basis of drag coefficients. Then turbulent structures developed in the different cases are shown and discussed in terms of the vorticity fields. Finally, an analysis based on the concept of swirling strength was carried out to select among the vortex extremes those associated with a coherent structure.