Towards an integrated neonatal brain and cardiac examination capability at 7 T: electromagnetic field simulations and early phantom experiments using an 8-channel dipole array

Objective

Neonatal brain and cardiac imaging would benefit from the increased signal-to-noise ratio levels at 7 T compared to lower field. Optimal performance might be achieved using purpose designed RF coil arrays. In this study, we introduce an 8-channel dipole array and investigate, using simulations, its RF performances for neonatal applications at 7 T.

Methods

The 8-channel dipole array was designed and evaluated for neonatal brain/cardiac configurations in terms of SAR efficiency (ratio between transmit-field and maximum specific-absorption-rate level) using adjusted dielectric properties for neonate. A birdcage coil operating in circularly polarized mode was simulated for comparison. Validation of the simulation model was performed on phantom for the coil array.

Results

The 8-channel dipole array demonstrated up to 46% higher SAR efficiency levels compared to the birdcage coil in neonatal configurations, as the specific-absorption-rate levels were alleviated. An averaged normalized root-mean-square-error of 6.7% was found between measured and simulated transmit field maps on phantom.

Conclusion

The 8-channel dipole array design integrated for neonatal brain and cardiac MR was successfully demonstrated, in simulation with coverage of the baby and increased SAR efficiency levels compared to the birdcage. We conclude that the 8Tx-dipole array promises safe operating procedures for MR imaging of neonatal brain and heart at 7 T.

     

防黑客设计技术

随着嵌入设备渗透进社会,并承担起更加重要的角色,安全失效会带来潜在的灾难性的后果。嵌入设备以无人干预方式运行在很多领域的数千种关键任务或安全相关系统中,如制造、健康保健、运输、金融和军事等。虽然我们不假思索地依赖于这些嵌入系统,但任何一种嵌入系统都可能成为临时黑客、犯罪团伙、恐怖分子,甚至敌对政府分子的潜在目标。阻止这些攻击的重任就落在了系统设计者的肩上,他不仅要保证通过或保存在嵌入设备中的数据的安全,而且还要保护产品本身的知识产权。     

The development and application of a multiple wavelength illumination technique for the vision-based process monitoring of aero-structure riveting

Airframe riveting is a critical process that requires high levels of process monitoring and quality assurance due to the very high risk associated with the failure of such joints. This paper describes the development of the enabling technology developed for a machine vision-based process monitoring system. One of the key factors affecting the performance of a machine vision system is the quality of the lighting. In the application described in this paper the available lighting was severely limited by the confined space in which the system had to operate. The problem was also compounded by the reflective nature of the objects to be examined. The initial images obtained were not suitable for further processing due to the presence of significant shadows and specular reflections. A novel solution to this problem based on multiple wavelength illumination and signal processing is presented along with results from experimental trials of the approach.     

生物除臭滤池在污水厂污泥处理段的除臭效能

对采用天然有机滤料和合成无机滤料的生物除臭滤池在加拿大多伦多市Ash-bridge’s Bay污水厂污泥处理站的干化和转运段的应用效果进行了分析。详细介绍了污泥脱水工艺、臭气的产生及其组分，进而对软木树皮滤料和矿物合成永久性滤料的除臭效果进行了比较。还讨论了一些具体的运行经验，并采用动态模型对不同条件下的运行数据进行了分析。     

Experimental and theoretical studies on a distributed temperaturesensor based on Brillouin scattering

Results are reported from recent research on the use of the Brillouin gain/loss mechanism for distributed sensing. A theoretical model of the interaction of the pulsed and CW beams is described and compared with experiments. Results from a system with a 51 km sensing length are presented. We finally investigate issues related to the variation within the sensing fiber of the polarizations of the two beams     

The gene encoding human glutathione synthetase (GSS) maps to the long arm of chromosome 20 at band 11.2

Two forms of glutathione synthetase deficiency have been described. While one form is mild, causing hemolytic anemia, the other more severe form causes 5-oxo-prolinuria with secondary neurological involvement. Despite the existence of two deficiency phenotypes, Southern blots hybridized with a glutathione synthetase cDNA suggest that there is a single glutathione synthetase gene in the human genome. Analysis of somatic cell hybrids showed the human glutathione synthetase gene (GSS) to be located on chromosome 20, and this assignment has been refined to subband 20q11.2 using in situ hybridization.     

An investigation into the occurrence of sewage fungus in rivers containing papermill effluents—IV. Growth in experimental channels dosed with effluents and pure compounds

Wastewaters from the manufacture of pulp and paper have given rise to problems of excessive microbial growth in rivers over a number of years. This paper is the first in a series of four articles describing research undertaken by PIRA at four U.K. paper/board mills (one integrated with pulp production) over the period 1978–1980. This first paper briefly reviews the published literature on sewage fungus growth from pulp and paper mill discharges up to 1978, but mainly describes previously unpublished work undertaken by PIRA over the period 1965–1975. This introductory paper thus provides a state-of-the-art review of methods to control sewage fungus growth from pulp and paper mill effluents prior to commencement of the research described in the following three articles.     

Infinite elements for the analysis of open dielectric waveguides

The finite-element method is applied to the modal analysis of unbounded, arbitrarily shaped, and arbitrarily inhomogeneous dielectric waveguides with the use of new infinite elements incorporating several radially decaying exponential trial functions. The outer optimization loop required by methods that use a single decaying trial function is eliminated, and all modes corresponding to a given phase constant are calculated in one pass of the solver. The method is tested for examples involving slab, circular, and square dielectric waveguides     

Hydrogen-assisted cracking studies of 4340 steel by using the optical method of caustics

The optical method of caustics is used to measure the effect of hydrogen on the localized deformation within the fracture process zone (PZ). In particular, the role of the PZ in hydrogen-assisted cracking (HAC) of 4340 steel in hydrogen gas at 1 atm is examined. No change in the caustic diameter was detected prior to crack initiation but an “anomalous” enlargement of the caustic diameter as a function of crack growth was observed as a result of crack tunneling. The “center” of the caustic follows the position of the internal crack front, thus providing a simple means to monitor the growth of internal cracks. It is demonstrated that the technique provides a sensitive means for detecting HAC initiation (the smallest crack depth change detected is 35 μm) and insight into the three-dimensional character of the PZ.