The effect of pH on bioremediation potential for the removal of direct violet textile dye by Aspergillus niger

Alkaline and acidic media have been used in the textile dye industry, depending on the fabric nature. The bioremoval of textile direct violet dye by Aspergillus niger fungal strain was studied. The effect of pH on dye bioremoval was investigated at a pH range from 2 to 11. The direct violet dye bioremoval reached maximum with 92.4%, 64.0%, 91.4%, and 62.3 % at pH values of 2, 3, 8, and 9, respectively, at 24 h of incubation. The percentages of removal rate after 72 h incubation were 98.9, 97.3, 94.0, 95.0, 97.0, and 97.3 at pH 2, 3, 6, 7, 8, and 9, respectively. The optimum pH values were 2, 3, 8, and 9 for direct dye removal. At the end of the experiments, the treatment with fungal strain could reduce COD value of synthetic dye solution by 76-91%. Pseudo first and second order kinetic models were applied to evaluate differences in the biosorption rates and uptakes of textile dye. Pre-equilibrium biosorption of direct violet dye onto fungus under different dye concentrations followed a pseudo second order kinetic model with a high degree of correlation coefficients (R² > 0.99), and the calculated values of q_e nearly matched the experimental values of textile dye during the biotreatment process.     

Electrokinetic potential of kaolinite clay in the presence of polystyrene sulfonate

The determination of the electrokinetic potential of clay is very important in many applications. Therefore, this work was aimed at studying the effect of poly(4‐ sodium styrene sulfonate) on the electrokinetic potential and the sedimentation behavior of kaolinite clays at different pH values and/or in the presence of sodium or calcium chlorides. At pH values lower than the point of zero charge (PZC) of the kaolinite clay, the zeta potential of Na‐ or Ca‐kaolinite in CaCl₂ solutions was higher than that in NaCl solutions at the same concentration. Above the PZC, the zeta potential of Na‐ or Ca‐kaolinite in NaCl solution was higher than that in CaCl₂ at the same electrolyte concentration. These results reflect the ability of calcium cations to compress the double layer of the kaolinite clay better than sodium cations. Also, below the PZC and at low concentrations of poly(4‐sodium styrene sulfonate), the zeta potential of the kaolinite clay suspensions had low value, while the sediment volumes had higher values. On the other hand, above the PZC at increasing polymer concentrations, the zeta potentials increased but the sediment volumes had lower values compared to those produced below the PZC. The data showed the zeta potential of Na‐kaolinite suspensions are higher than Ca‐kaolinite, producing lower sediment volumes of Na‐kaolinite compared to Ca‐kaolinite at the same concentrations of polymer and/or pHs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1705–1711, 2006     

A new systematic firefly algorithm for forecasting the durability of reinforced recycled aggregate concrete

This study presents a new systematic algorithm to optimize the durability of reinforced recycled aggregate concrete. The proposed algorithm integrates machine learning with a new version of the firefly algorithm called chaotic based firefly algorithm (CFA) to evolve a rational and efficient predictive model. The CFA optimizer is augmented with chaotic maps and Lévy flight to improve the firefly performance in forecasting the chloride penetrability of strengthened recycled aggregate concrete (RAC). A comprehensive and credible database of distinctive chloride migration coefficient results is used to establish the developed algorithm. A dataset composite of nine effective parameters, including concrete components and fundamental characteristics of recycled aggregate (RA), is used as input to predict the migration coefficient of strengthened RAC as output. k-fold cross validation algorithm is utilized to validate the hybrid algorithm. Three numerical benchmark analyses are applied to prove the superiority and applicability of the CFA algorithm in predicting chloride penetrability. Results show that the developed CFA approach significantly outperforms the firefly algorithm on almost tested functions and demonstrates powerful prediction. In addition, the proposed strategy can be an active tool to recognize the contradictions in the experimental results and can be especially beneficial for assessing the chloride resistance of RAC.     

High Stable Al-MCM-41: Structural Characterization and Evaluation for Removal of Methylene Blue from Aqueous Solution

Aluminosilicate (Al-MCM-41) was synthesized via a modified wet-method in a Si/Al atomic ratio of 13.64:1.00 and calcination at 500 °C. The structural     

Occurrence and seasonal variations of Giardia in wastewater and river water from Al-Jinderiyah region in Latakia,Syria

ABSTRACT

This study investigates the occurrence and concentration of Giardia cysts in wastewater and river water samples in Al-Jinderiyah region, Latakia, Syria. A total of 120 samples were collected between October 2016 and October 2017 from influent and effluent of Al-Jinderiyah Waste Water Treatment Plant (WWTP) and from three contaminated river water sites. Samples were concentrated and subjected to microscopic examination. The results show that the concentrations of cysts ranged from 0 to 297 cysts/L in wastewater samples. The overall removal efficiency of cysts in the activated sludge WWTP was 84.35%. The concentrations of cysts ranged from 0 to 128.52 cysts/L in river water samples. The highest concentration in river water was recorded near the raw wastewater discharge point. Seasonal variations of Giardia cysts concentration were significant, and the highest concentrations were recorded in the rainy season. The results suggest that Giardia may pose a public health risk in the studied region.     

Preparation of polyaniline and studying its electrical conductivity

Polyaniline was prepared by chemical methods. Its electrical conductivity was measured. The electrical conductivity of polyaniline salt and polyaniline base were compared with composites prepared by the hot press of polyaniline base with KBr, Co(CH₃COO)₂, and picric acid. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1658–1665, 2000     

Exploring motorcyclist injury severity in approach-turn collisions at T-junctions: focusing on the effects of driver's failure to yield and junction control measures

Research has suggested that motorcyclists involved in approach-turn crashes were much more injurious than any other crash-type. This paper investigates the determinants of motorcyclist injury severity resulting from such crash types that occurred at T-junctions, with emphasis on the effects of driver's failure to give way and various junction control measures. The ordered probit models of motorcyclist injury severity were estimated using the data extracted from the STATS19 accident injury database (1991-2004). Approach-turn collisions are categorised into two sub-crashes based on the manoeuvres motorcycles and vehicles were making prior to the collisions. The modelling results uncover several important determinants of injury severity: for example, injuries appeared to be greatest when an approaching motorcycle collided with a turning-right vehicle, and such effect was found to exacerbate injury severity when stop, give-way signs and markings controlled the junction. A turning-right driver that was identified to fail to yield to an approaching motorcyclist was also found to severely injure the motorcyclist. The findings of this study may offer guidelines for further research and provide some important preliminary evidence for the development of countermeasures that may help prevent the specific hazards from occurring.     

Rapid quantitative method for total brominated vegetable oil in soft drinks using ion chromatography

A simple, quantitative and rapid method for total brominated vegetable oil (BVO) using ion chromatography (IC) with suppressed conductivity detection was developed and successfully applied to soft drinks with results expressed as inorganic bromide anion. The procedure involves extraction of BVO with diethyl ether and treatment with zinc dust in a solution of acetic acid, giving recoveries ranging between 92.5 and 98.5%. The calibration curves obtained were linear with correlation coefficients (r (2)) of 0.998, a coefficient of variation (CV) of less than 5% and limit of detection (LOD) and limit of quantification (LOQ) of 250 and 750?μg?l(-1), respectively. The method was successfully applied to the determination of BVO in several commercial soft drinks which were found to contain BVO in the range 1.8-14.510?mg?l(-1). The method has less sources of error compared to previously published methods.