Biological evaluation of two anomeric glucose analogues iodinated in position 6

Two anomeric analogues of glucose labelled with 123 iodine in position 6, proposed as tracers of glucose transport in vivo, have been synthesized: alpha- and beta-methyl-6-deoxy-6-iodo-D-glucopyranoside (alpha MDIG and beta MDIG). The aim of this study was to determine whether these molecules interact with the glucose transporter and whether they could be used as tracers of glucose transport in vivo. The biodistribution of alpha MDIG and beta MDIG was studied in the mouse in vivo. To determine if these two anomers enter the cell via the glucose transporter, their uptake was measured in isolated perfused rat hearts, in human erythrocytes in suspension, and in cardiomyocytes of neonatal rat in culture. Both alpha MDIG and beta MDIG had similar repartitions in the mouse: myocardial uptake averaged 7% of the injected dose/g of organ at 2 min postinjection and alpha MDIG competed with D-glucose to enter the cells. Insulin produced a 123% increase of its uptake in isolated perfused rat hearts and a 100% increase in cardiomyocytes of neonatal rat in culture. alpha MDIG uptake was lowered in the presence of glucose transport inhibitors in each experimental model. An interaction between beta MDIG and glucose transporters was observed only in human erythrocytes in suspension. Only alpha MDIG interacts with the glucose transporter, and thus could be used to estimate glucose transport in vivo.     

Macroscopic and crystallographic density of solid-state extruded polyethylene

Summary The influence of draw ratio on macroscopic and crystallographic density of polyethylene with different initial morphologies, has been investigated by solid-state extrusion. An initial drop followed by an increase in macroscopic density as a function of draw ratio has been observed. Since precision X-ray measurements of unit cell parameters showed no variation of crystallographic density, it was concluded that plastic deformation of polyethylene upon drawing proceeds with a decrease of the degree of crystallinity. This was confirmed by differential scanning calorimetry.     

Arthroscopic lysis in knee arthrofibrosis

OBJECTIVE: To compare the efficacy and toxicity of three patient-controlled analgesia (PCA) morphine regimens. DESIGN: A prospective, randomized, pilot study of three PCA morphine regimens: (1) 1 mg with 6-minute lockout (n = 10), (2) 2 mg with 12-minute lockout (n = 12), and (3) 2 mg with 20-minute lockout (n = 12). SETTING: Large teaching institution. PARTICIPANTS: Thirty-four patients undergoing cholecystectomy or hysterectomy. MAIN OUTCOME MEASURES: Pain scores (0 = no pain, 1 = mild pain, 2 = moderate pain, 3 = severe pain), sedation scores, analgesic consumption, and patient attempts (patient activation of PCA device) and injections (doses actually delivered) were evaluated using analysis of covariance. Distribution of pain and sedation scores and adverse effects were assessed using Fisher's exact test. RESULTS: Data on 24 patients were evaluable. Six patients withdrew for poor pain control (2 in group 1, 1 in group 2, and 3 in group 3). Three other patients withdrew because of adverse effects and 1 withdrew because of pump problems. Mean morphine consumption did not differ significantly among the groups. Distribution of pain and sedation scores and the number of patients with nausea were similar across treatment groups. The mean injection to attempt ratio was significantly smaller in group 3 (0.71 +/- 0.11) compared with groups 1 and 2 (0.9 +/- 0.06 and 0.83 +/- 0.09, respectively; p = 0.001). Adverse events occurred similarly among treatment groups. CONCLUSIONS: No significant differences in the efficacy or toxicity of the three morphine PCA regimens were identified.     

VRCTC-310--a novel compound of purified animal toxins separates antitumor efficacy from neurotoxicity

Two purified animal venom toxins, crotoxin and cardiotoxin, have been combined to produce a unique natural product (VRCTC-310) currently under investigation as an antitumor agent by the National Cancer Institute. In vitro, it has demonstrated cytotoxic disease specificity and a unique mechanism of action when submitted to COMPARE analysis. In vivo, tolerance was developed to the neurotoxic properties of crotoxin which allowed comparison of several schedules of fixed and escalating daily i.m. doses to mice bearing s.c. Lewis Lung carcinoma. An 83% inhibition of tumor growth was achieved using an escalating dose schedule starting at 1.8 mg/kg and reaching 6.3 mg/kg/day on day 20. Although some irritation around the sites of i.m. injection was noted, animal weight loss was negligible and there were no other signs of adverse toxicity. This natural product represents a new, membrane interactive anticancer agent which produces a unique spectrum of cytotoxicity in vitro and which has demonstrated interesting in vivo antitumor efficacy.     

Cost-effective smart power CMOS/DMOS technology: design methodology for latch-up immunity

To answer to the need of a cost effective smart power technology, an original design methodology that permits implementing latch-up free smart power circuits on a very simple CMOS/DMOS technology is proposed. The basic concept used to this purpose is letting float the wells of the MOS transistors most susceptible to initiate latch-up. The efficiency of the design methodology is experimentally shown.     

Catalytic behaviour and surface properties of supported lanthana

This paper deals with the role of dispersed lanthana as an active phase in several catalytic reactions: CO hydrogenation, CO oxidation, and oxidative dimerization of methane.

Characterization of the prepared catalysts indicates that lanthana can be effectively dispersed on silica and on ceria. While in the case of silica-supported catalysts lanthana appears at the surface, leading to an almost full coverage for loadings higher than 40%, in the case of ceria-based systems, lanthana forms a solid solution with the support.

In all the reactions studied, the presence of lanthana can be related to significant changes in the catalytic properties of the bare supports. Thus, the selectivity towards the total oxidation products observed on pure ceria is decreased, and the low activity shown by silica is enhanced. For the CO+H₂ reaction, the addition of lanthana also generates upgraded products.     

Analysis and optimization of weakly coupled thermoelastoplastic systems with applications to weldment design

A systematic approach for the design of weakly coupled thermoelastoplastic systems is presented. The Newton–Raphson iteration method is used in the solution process so that analytic design sensitivity formulations may be efficiently derived via the direct differentiation technique. The derived formulations are suitable for finite element implementations. Analysis and sensitivity analysis capabilities are combined with numerical optimization to form an optimum design algorithm. To demonstrate the algorithm, we optimally design a weldment with respect to manufacturing and service life aspects.     

Efficient and accurate waveguide mode computation using BI‐RME and Lanczos methods

In this paper, a special purpose algorithm for solving large eigenvalue problems based on the Lanczos method is successfully applied to an engineering problem: the electromagnetic analysis and design of passive waveguide devices. For dealing with such complex problems, the boundary integral‐resonant mode expansion (BI‐RME) technique has been recently proposed. This technique solves integral equations (IEs) through the well‐known method of moments (MoM), thus leading to structured eigenvalue problems. These problems frequently become very large when solving complex arbitrary geometries with high accuracy. In such cases, the eigenvalue problem cannot be efficiently solved with standard methods by means of personal computers, essentially due to CPU time and memory allocation requirements. In this paper, we propose an alternative technique, based on the Lanczos method, for the fast and accurate solution of large BI‐RME generalized eigenvalue problems. The novel theoretical aspects of this approach, as well as the impacton the original BI‐RME formulation, are described. Comparative benchmarks are also successfully presented for the full‐wave analysis and design of real passive microwave devices. Copyright © 2005 John Wiley Sons, Ltd.     

Branching and pruning: An optimal temporal POCL planner based on constraint programming

A key feature of modern optimal planners such as graphplan and blackbox is their ability to prune large parts of the search space. Previous Partial Order Causal Link (POCL) planners provide an alternative branching scheme but lacking comparable pruning mechanisms do not perform as well. In this paper, a domain-independent formulation of temporal planning based on Constraint Programming is introduced that successfully combines a POCL branching scheme with powerful and sound pruning rules. The key novelty in the formulation is the ability to reason about supports, precedences, and causal links involving actions that are not in the plan. Experiments over a wide range of benchmarks show that the resulting optimal temporal planner is much faster than current ones and is competitive with the best parallel planners in the special case in which actions have all the same duration.¹