Electrical and optical properties of semi-insulating polycrystalline silicon thin films: the role of microstructure and doping

We have investigated the relationship between microstructure and electrical conductivity in semi-insulating polycrystalline silicon (SIPOS) with oxygen concentrations in the 2–35 at.% range and the effect of doping with boron, phosphorus, arsenic and erbium by ion implantation. SIPOS thin films are mixtures of silicon and silicon oxide phases. The chemical and morphological evolution of these phases upon annealing is emphasized. Electrical conductivity measurements are interpreted in terms of a physical model containing few free parameters related to the material microstructure. A direct extension of this model explains also the conductivity increase in SIPOS doped with elements of the third or the fifth group. In the last part of the paper, data of electroluminescence at 1.54 μm in Er-implanted SIPOS due to intra-4f transitions of the Er³⁺ ion are shown and discussed.     

Development of an undergraduate course – Internet-based instrumentation and control

The objective, strategy, and implementation details of a new undergraduate course, Internet-based Instrumentation and Control, are presented. The course has a companion laboratory that is supported by the National Science Foundation and industry. The combination is offered to senior-level undergraduate engineering students interested in sensing, instrumentation, control, and web programming that want to learn more about the integration of these technologies for solving real-world engineering problems. The course will also be offered to gifted high school seniors with similar interests and can serve as a vehicle to attract them to engineering disciplines. Preliminary assessment of the first offering of the course is encouraging and has shown that the course has achieved success in helping students understand concepts and master basic technologies for developing Internet-based automatic systems.     

Electrochromic properties of tungsten-molybdenum oxide electrodes

Tungsten oxide and molybdenum doped tungsten oxide electrochromic films have been electrochemically prepared from a metal peroxide bath and experimentally tested. They were characterized by electrical and optical methods, using cyclic voltammograms and calculating the charge capacity as a function of the number of deposition cycles.The color of the electrochromic WO₃ film is strongly altered by doping it with molybdenum. Electrochromic W---Mo oxide films were fabricated by adding different percentages of molybdenum to tungsten oxide, ranging from 0.5% to 7% weight of deposition solution. Normal optical transmittance was also measured and evidence is given of different behavior if the switching for oxidation and reduction cycle, so that coloration occurs in a shorter time than the bleaching. The time constant of the process tends to increase as a function of the molybdenum oxide doping concentration.     

Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

A model to assess the effectiveness of topical antipruritics

A model has been developed to determine the effectiveness of topical antipruritics. It utilizes controlled, experimentally induced itch and has demonstrated the effectiveness of the direct action on cutaneous receptor sites of a topical anesthetic, benzocaine, in a topical antipruritic formulation, and has been used to differentiate between two effective topical antipruritics. Three studies are presented: The first study examined the reliability of the experimentally induced itch. Several indices of reliability were computed from the data of this first study. Cronbach's alpha was 0.92. Winer's theta also was 0.92. Simple test-retest reliability, computed at intervals of 29 min, 1 day, and 6-7 days, resulted in Pearson correlations of 0.84, 0.73, and 0.60, respectively. In the second study, the model differentiated statistically between the itch relief resulting from the topical application of a formulation with 6% benzocaine and the same formulation without benzocaine. The third study examined 2 known topical antipruritics: one containing 6% benzocaine and the other 1% hydrocortisone. Both topical antipruritics were found to relieve itch; however, the benzocaine antipruritic produced statistically significantly greater itch relief in more subjects than the hydrocortisone antipruritic at both 1 and 30 min after application. These results demonstrate that OTC antipruritics can be differentiated for effectiveness.     

Preceramic organoboron–silicon polymers

Several boron-containing organosilicon polymers were synthesized from a sodium-coupling reaction of silicon and boron halides with and without alkyl halide in hydrocarbon solvents. The B–Si preceramic polymers were characterized using techniques such as IR, UV, and NMR spectrometry, gel permeation chromatography, elemental analysis, molecular weight measurement, and thermal analyses (TGA, DSC, DTA, and TMA). The chemical structures of the preceramic polymers were postulated based on the analytical results. Black ceramic materials were obtained from the precursor polymers upon thermal degradation at temperatures above 1000°C in an inert atmosphere. The precursor polymers had a ceramic yield of up to 70%. Thermogravimetric analysis of the ceramic material in air at a flow rate of 100 mL/min showed it was stable up to 1000°C with little weight gain or loss. Several methods were used to characterize the ceramic materials: XRD, solid NMR, high-temperature DTA, elemental analysis, and acid digestion. The analyses indicated that the ceramic materials comprised a mixture of silicon carbide (SiC), silicon borides (SiB₄, SiB₆), and amorphous Si–B–C ceramics, with small amounts of silica and free silicon.     

Growth dynamics in cystic fibrosis

The growth profiles of 28 cystic fibrosis patients, followed for at least three years, were analysed in order to study the dynamics of growth and to verify if any correlation with clinical events exists. Heights and weights were recorded at three-month intervals, and the patterns did not appear stable or linear, although a graphical smoothing might depict a linear pattern. Height and weight velocity profiles were plotted and all cases showed regular pulsatile patterns of height and weight velocity. By taking measurements at three-month intervals, the pulsatile rhythm was found to be associated with a circannual rhythm. When the appearance of clinical events was related to growth velocity profiles for each individual, the majority (71-82%) occurred during the descending phase of the growth velocity. An understanding of the individual pulsatile pattern of growth may actually increase the sensitivity of surveillance, and checks might be programmed according to the individual pattern, since the risk of developing an adverse clinical event is significantly greater during the slowing phase of the growth velocity.