Accelerated multi-contrast high isotropic resolution 3D intracranial vessel wall MRI using a tailored k-space undersampling and partially parallel reconstruction strategy

Objective

To develop a 3D multi-contrast IVW protocol with 0.5-mm isotropic resolution and a scan time of 5 min per sequence.

Materials and methods

Pre-contrast T1w VISTA, DANTE prepared PDw VISTA, SNAP, and post-contrast T1w VISTA were accelerated using cartesian undersampling with target ordering method (CUSTOM) and self-supporting tailored k-space estimation for parallel imaging reconstruction (STEP). CUSTOM + STEP IVW was compared to full-sample IVW, SENSE-accelerated IVW, and CUSTOM + zero-filled Fourier reconstruction in normal volunteers and subjects with intracranial atherosclerotic disease (ICAD). Image quality, vessel delineation, CSF suppression, and blood suppression were compared.

Results

CUSTOM + STEP vessel wall delineation was comparable to full-sample IVW and better than SENSE IVW for vessel wall delineation on T1w VISTA and luminal contrast on SNAP. Average image quality and wall depiction were significantly improved using STEP reconstruction compared with zero-filled Fourier reconstruction, with no significant difference in CSF or blood suppression.

Conclusions

CUSTOM + STEP allowed multi-contrast 3D 0.5-mm isotropic IVW within 30 min. Although some quantitative and qualitative scores for CUSTOM − STEP were lower than fully sampled IVW, CUSTOM + STEP provided comparable vessel wall delineation as full-sample IVW and was superior to SENSE. CUSTOM + STEP IVW was well tolerated by patients and showed good delineation of ICAD plaque.

     

Esterification of valeric acid over PTA supported mesoporous Al-SBA-15 as efficient solid acid catalysts

Journal of Porous Materials - Valeric acid can be produced by selective hydrogenation of biomass-derived levulinic acid. The present work aims to synthesize ethyl valerate (EV), a fuel, fuel...     

Effect of adhesive‐coated glass fiber in natural rubber (NR), acrylonitrile rubber (NBR), and ethylene–propylene–diene rubber (EPDM) formulations. II. Effect of cyclic loading,abrasion, and accelerated aging

Treated glass fibers (RICS, 3 and 6 mm in length) were added at a concentrations of 10, 20, and 30 phr in natural rubber (NR), nitrile rubber (NBR), and ethylene–propylene–diene comonomer (EPDM) formulations, in both plain and carbon black mixes. The compounds were mixed in two‐roll mill and were evaluated for their resistance to hot‐air aging, abrasion, compression set, Goodrich heat buildup, De Mattia fatigue, and for NR mixes, adhesion in the tensile mode. The vulcanizates of the three rubbers showed resistance to hot‐air aging. Abrasion resistance was poor for NR, and it improved with carbon black addition in the presence of treated glass fiber in NBR. In carbon‐black‐added EPDM vulcanizates, the abrasion resistance and fatigue resistance were better. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1124–1135, 2004     

Propagation of correlations in local random quantum circuits

We derive a dynamical bound on the propagation of correlations in local random quantum circuits—lattice spin systems where piecewise quantum operations—in space and time—occur with classical probabilities. Correlations are quantified by the Frobenius norm of the commutator of two positive operators acting on disjoint regions of a one-dimensional circular chain of length L. For a time \(t=O(L)\), correlations spread ballistically to spatial distances \(\mathcal {D}=t\), growing at best, diffusively with time for any distance within that radius with extensively suppressed distance- dependent corrections. For \(t=\varOmega (L^2)\), all parts of the system get almost equally correlated with exponentially suppressed distance- dependent corrections and approach the maximum amount of correlations that may be established asymptotically.     

Fuzzy Based Ant Colony Optimization Scheduling in Cloud Computing

Cloud computing is an Information Technology deployment model established on virtualization. Task scheduling states the set of rules for task allocations to an exact virtual machine in the cloud computing environment. However, task scheduling challenges such as optimal task scheduling performance solutions, are addressed in cloud computing. First, the cloud computing performance due to task scheduling is improved by proposing a Dynamic Weighted Round-Robin algorithm. This recommended DWRR algorithm improves the task scheduling performance by considering resource competencies, task priorities, and length. Second, a heuristic algorithm called Hybrid Particle Swarm Parallel Ant Colony Optimization is proposed to solve the task execution delay problem in DWRR based task scheduling. In the end, a fuzzy logic system is designed for HPSPACO that expands task scheduling in the cloud environment. A fuzzy method is proposed for the inertia weight update of the PSO and pheromone trails update of the PACO. Thus, the proposed Fuzzy Hybrid Particle Swarm Parallel Ant Colony Optimization on cloud computing achieves improved task scheduling by minimizing the execution and waiting time, system throughput, and maximizing resource utilization.     

Structural,morphological, optical and electrical properties of CdS thin films simultaneously doped with magnesium and chlorine

CdS thin films simultaneously doped with Mg and Cl at different doping concentrations (0, 2, 4, 6 and 8 at%) were prepared on glass substrates by spray pyrolysis technique using perfume atomizer at 400 °C. The effect of Mg and Cl doping concentration on the structural, morphological, optical and electrical properties of the deposited films were investigated using X-ray diffraction (XRD), scanning electron microscopy, UV–Vis spectroscopy and dc electrical measurements, respectively. XRD analysis showed that the undoped and doped CdS films exhibit hexagonal structure with a preferential orientation along the (0 0 2) plane. The 2θ angle position of the (0 0 2) peak of the doped films was shifted towards a higher angle with increasing Mg and Cl concentration. The UV–Vis–NIR absorption spectra of Mg and Cl doped thin films are measured and classical Tauc approach was employed to estimate their band gap energies. The increase in band gap energy from 2.46 to 2.73 eV with the reduction in crystallite size supports quantum size effect. Raman spectra implied that more defects existed in the doped samples. Electrical studies showed that all the films have resistivity in the order of 10¹ Ω-cm and the CdS film with 6 at% Mg and Cl concentration has a minimum resistivity of 1.332 × 10¹ Ω-cm.     

Characterizing the Nash equilibria of a three-player Bayesian quantum game

Quantum games with incomplete information can be studied within a Bayesian framework. We consider a version of prisoner’s dilemma (PD) in this framework with three players and characterize the Nash equilibria. A variation of the standard PD game is set up with two types of the second prisoner and the first prisoner plays with them with probability p and \(1-p\), respectively. The Bayesian nature of the game manifests in the uncertainty that the first prisoner faces about his opponent’s type which is encoded either in a classical probability or in the amplitudes of a wave function. Here, we consider scenarios with asymmetric payoffs between the first and second prisoner for different values of the probability, p, and the entanglement. Our results indicate a class of Nash equilibria (NE) with rich structures, characterized by a phase relationship on the strategies of the players. The rich structure can be exploited by the referee to set up rules of the game to push the players toward a specific class of NE. These results provide a deeper insight into the quantum advantages of Bayesian games over their classical counterpart.     

Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process

The manner with which the composite powder particles injected into the laser formed molten pool decides the deposition quality in a typical laser-based powder deposition of composite material. Since, the morphology and physical properties of nickel (Ni) and tungsten carbide (WC) are different their powder flow characteristics such as the powder particles stream structure, maximum concentration at the converging spot, and the powder particles velocity are noticeably different. In the current study, a computational fluid dynamics (CFD) based powder flow model is established to characterize the coaxial powder flow behavior of Ni–WC composite powders. The key powder flow characteristics such as the stand-off distance, the diameter of the powder stream at the stand-off distance, and the velocity of the powder particles are measured using three different vision based techniques. Both the numerical and experimental results reveal the exact stand-off distance where the substrate needs to be placed, the diameter of the concentration spot of powder at the stand-off distance, and a combination of suitable nozzle angle, diameter, and carrier gas flow rate to obtain a maximum powder concentration at the stand-off distance with a stable composite powder flow.     

Metallurgical Studies of Austenitic Stainless Steel 304 under Warm Deep Drawing

Austenitic stainless steel 304 was deep drawn with different blank diameters under warm conditions using 20 t hydraulic press. A number of deep drawing experiments both at room temperature and at 150 ℃ were conducted to study the metallography. Also, tensile test experiments were conducted on a universal testing machine up to 700 ℃ and the broken specimens were used to study the fractography of the material using scanning electron microscopy in various regions. The microstructure changes were observed at limiting draw ratio （LDR） when the cup is drawn at different temperatures. In austenitic stainless steel, martensite formation takes place that is not only affected by temperature, hut also influenced by the rate at which the material is deformed. In austenitic stainless steel 304, dynamic strain regime appears above 300 ℃ and it decreases the formability of material due to brittle fracture as studied in its fractography. From the metallographic studies, the maximum LDR of the material is observed at 150 ℃ before dynamic strain regime. It is also observed that at 150 ℃, grains are coarse in the drawn cups at LDR.     

Fourier transform infrared-probed O(3P) microreactor: demonstration with ethylene reactions in argon matrix

To demonstrate the development of an oxygen atom microreactor in the form of liquid-helium-cooled solid argon matrix deposited on an infrared (IR) window, the oxidation of ethylene by mobile O atoms has been investigated. O atom diffusion through the argon matrix is confirmed and used to examine ethylene-oxygen atom reactions. In a bench-scale matrix isolation system probed with a Fourier transform infrared (FT-IR) spectrometer, matrices of solid Ar at 8-10 K doped with NO2 and ethylene have been prepared on a ZnSe window within an evacuated cryostat. The matrices have been photolyzed using 350-450 nm photons, and the reaction products resulting from the reaction of O(3P), one of the photolysis products of NO2, with ethylene have been identified using FT-IR and a Gaussian 98W simulation program. These products include oxirane, acetaldehyde, ethyl nitrite radical, and ketene. The temperature effect in the range of 10-30 K on the products formed has also been investigated. The reaction mechanisms are discussed and the viability of the solid Ar matrix being a low temperature microreactor to examine reaction mechanisms of mobile oxygen atoms is elaborated.