Zeolitic imidazolate framework-8 modified cathode promotes microbial electrosynthesis from carbon dioxide

Microbial electrosynthesis (MES) is an electrochemical reduction technology through which microorganisms attached to a cathode are driven by electricity to reduce carbon dioxide (CO₂) into industrial chemicals. However, the limited contact time with biocatalysts affects the performance of MES because of low CO₂ solubility. In this study, zeolitic imidazolate framework-8 (ZIF-8) particles with different pore diameters modified cathodes were prepared. Results showed that the ZIF-8 modified electrode obtained the maximum acetate production rate (0.13 g L^?1 d^?1), which was 1.4 times that of bare CF, and the accumulated acetate concentration reached 4.04 ± 0.1 g L^?1 within 30 days. Brunauer–Emmett–Teller test and CO₂ adsorption characteristic evaluation indicated that ZIF-8 had a high specific surface area and an excellent CO₂ adsorption capacity. Scanning electron microscopy and microbial community analysis revealed that ZIF-8 modified electrodes were beneficial to biofilm formation and increased the enrichment of Acetobacterium and Arcobacter. Therefore, CO₂-adsorbing materials modified electrodes are effective in improving the performance of MES.     

Effects of sintering temperature and Bi2O3, Y2O3 and MgO co-doping on the dielectric properties of X8R BaTiO3-based ceramics

Bi₂O₃, Y₂O₃ and MgO co-doped BaTiO₃ (BT)-based X8R ceramics were synthesized successfully for the first time. The effects of the sintering temperature and Bi₂O₃, Y₂O₃ and MgO dopants on the dielectric properties were investigated systematically. Bi₂O₃ doping can increase the Curie temperature (T_c), but reduces the overall dielectric permittivity. On the other hand, Y₂O₃ doping is beneficial to the formation of core-shell microstructure and the increase of T_c, whereas MgO can prevent excessive Y₂O₃ from diffusing into grain core, and thereby further contributes to the generation of the core–shell microstructure. The generation of the typical core-shell microstructure was confirmed and investigated in detail by using transmission electron microscopy (TEM). It is argued that the synergistic effects of Bi₂O₃, Y₂O₃ and MgO co-doping in terms of the formation of the core-shell structure and the increase of T_c, can help improve the temperature stability of the dielectric permittivity effectively. Increasing the sintering temperature leads to an increase in the grain size, which in turn leads to an increase in the overall dielectric permittivity due to the grain size effect.     

Ablative Radiotherapy Reprograms the Tumor Microenvironment of a Pancreatic Tumor in Favoring the Immune Checkpoint Blockade Therapy

The low overall survival rate of patients with pancreatic cancer has driven research to seek a new therapeutic protocol. Radiotherapy (RT) is frequently an option in the neoadjuvant or palliative settings for pancreatic cancer treatment. This study explored the effect of RT protocols on the tumor microenvironment (TME) and their consequent impact on anti-programmed cell death ligand-1 (PD-L1) therapy. Using a murine orthotopic pancreatic tumor model, UN-KC-6141, RT-disturbed TME was examined by immunohistochemical staining. The results showed that ablative RT is more effective than fractionated RT at recruiting T cells. On the other hand, fractionated RT induces more myeloid-derived suppressor cell infiltration than ablative RT. The RT-disturbed TME presents a higher perfusion rate per vessel. The increase in vessel perfusion is associated with a higher amount of anti-PD-L1 antibody being delivered to the tumor. Animal survival is increased by anti-PD-L1 therapy after ablative RT, with 67% of treated animals surviving more than 30 days after tumor inoculation compared to a median survival time of 16.5 days for the control group. Splenocytes isolated from surviving animals were specifically cytotoxic for UN-KC-6141 cells. We conclude that the ablative RT-induced TME is more suited than conventional RT-induced TME to combination therapy with immune checkpoint blockade.     

Microstructure and some properties of powder-pack borided Ti–5Mo–5V–8Cr–3Al alloy with special attention to the microstructure at the interface TiB/substrate

The borided layer was prepared on the surface of the Ti–5Mo–5V–8Cr–3Al alloy by powder-pack boriding at 1000°C-10h. SEM, EPMA and TEM were used to investigate the effects of alloying elements (Al, V, Mo and Cr) on the growth of TiB whiskers in the borided Ti–5Mo–5V–8Cr–3Al alloy. Wear properties of borided Ti–5Mo–5V–8Cr–3Al alloy were investigated using dry reciprocating friction tests. SEM results show that the thickness of boride layer in Ti–5Mo–5V–8Cr–3Al alloy is thinner than that in the Cp-Ti. This is attributed to the enrichment of alloying elements especially V in TiB/substrate by TEM, which hinders the diffusion of B atoms, thus resulting in the short and thick TiB whiskers in Ti–5Mo–5V–8Cr–3Al alloy. Borided Ti–5Mo–5V–8Cr–3Al alloy has the better wear resistance than as-received alloy.     

Enhanced photoreactivity of MOFs by intercalating interlayer bands via simultaneous ?NCO and ?SCu modification

Herein, we propose a novel method to enhance the photoreactivity of an MOF catalyst by grafting isocyanate bonds ( NCO) and sulfhydryl-complexed copper ( SCu) onto ZIF-8 (NIF-SCu). The grafting process intercalated interlayer bands between the conduction and valence bands of ZIF-8, thereby providing a “ladder” for facile electron transition. The extreme improvement in the photoreactivity of NIF-SCu could be attributed to the enhancement in light responses in the range of 350–450 nm by  NCO groups and the widening of the visible light range of the MOF by  SCu groups. The formation of staggered energy levels in NIF-SCu could also narrow the band gap, lower the resistance, and facilitate the transfer of photogenerated carriers, thereby generating electrons with strong reduction potential in the  SCu conduction band. This study provides a new strategy for improving or even endowing the photoactivity of environmental functional materials with wide bandgaps.     

The Impact of the ‘Mis-Peptidome’ on HLA Class I-Mediated Diseases: Contribution of ERAP1 and ERAP2 and Effects on the Immune Response

The strong association with the Major Histocompatibility Complex (MHC) class I genes represents a shared trait for a group of autoimmune/autoinflammatory disorders having in common immunopathogenetic basis as well as clinical features. Accordingly, the main risk factors for Ankylosing Spondylitis (AS), prototype of the Spondyloarthropathies (SpA), the Behçet’s disease (BD), the Psoriasis (Ps) and the Birdshot Chorioretinopathy (BSCR) are HLA-B*27, HLA-B*51, HLA-C*06:02 and HLA-A*29:02, respectively. Despite the strength of the association, the HLA pathogenetic role in these diseases is far from being thoroughly understood. Furthermore, Genome-Wide Association Studies (GWAS) have highlighted other important susceptibility factors such as Endoplasmic Reticulum Aminopeptidase (ERAP) 1 and, less frequently, ERAP2 that refine the peptidome presented by HLA class I molecules to CD8⁺ T cells. Mass spectrometry analysis provided considerable knowledge of HLA-B*27, HLA-B*51, HLA-C*06:02 and HLA-A*29:02 immunopeptidome. However, the combined effect of several ERAP1 and ERAP2 allelic variants could generate an altered pool of peptides accounting for the “mis-immunopeptidome” that ranges from suboptimal to pathogenetic/harmful peptides able to induce non-canonical or autoreactive CD8⁺ T responses, activation of NK cells and/or garbling the classical functions of the HLA class I molecules. This review will focus on this class of epitopes as possible elicitors of atypical/harmful immune responses which can contribute to the pathogenesis of chronic inflammatory diseases.     

芳烃联合装置抽余液生产间二甲苯工艺的工业应用

介绍了宁波中金石化有限公司200 kt/a 间二甲苯(MX)吸附分离装置的工业应用情况。该装置于2020年建成投产，一次投料开车成功，为全球最大的MX生产装置。装置性能测试结果表明，MX产能达到203.3 kt/a，产品纯度（w）为99.53%，单程收率为95.1%。保持吸附剂在合适的水含量范围内可以有效提高吸附剂选择性，提高产品纯度和单程收率；苯为吸附剂的暂时性毒物，解吸剂中苯含量增加会降低吸附分离过程的单程收率。     

New cardo silylated poly(azomethine)s containing 9,9′‐diphenylfluorene units as materials with Brønsted acid‐dependent fluorescence

Aromatic poly(azomethine)s have been studied due to their attractive properties such as high thermal stability, semiconducting behavior and the ability to coordinate species with their imine units (C?N). In this paper, the synthesis and characterization of two novel silylated poly(azomethine)s containing cardo units are reported. These materials were highly soluble in organic solvents such as chloroform and m‐cresol and were thermally stable, and PAzMC1 exhibited a high glass transition temperature value (287 °C), while that for PAzMC2 was not observed. UV–visible spectrophotometry revealed absorption bands related to the aromatic backbone of both PAzMCs, 300–285 nm in tetrahydrofuran and 310–301 nm in dimethylsulfoxide, and bands attributed to the conjugated imine unit at around 350 nm. In order to investigate the phenomenon of the emission of fluorescence promoted by dopant agents with regard to potential optoelectronic applications, the materials were doped with H₂SO₄ and their optical and electrochemical properties investigated. Thus, the absorption band of the imine group was suppressed due to the nitrogen atoms being protonated. Fluorescence spectroscopy analysis developed in dilute solutions of polymers showed no emission from the undoped polymers, whereas the acid‐doped species emitted fluorescence in the UV and violet regions (322 nm). Cyclic voltammetry measurements were carried out and HOMO–LUMO energies were estimated. This study provides a starting point for the development of new poly(azomethine)s with doping‐dependent emission. © 2019 Society of Chemical Industry     

偶氮着色剂ISO 14632-2017变更解读

ISO 14362—2017《纺织品源于偶氮着色剂的特定芳香胺的测定方法》对于前处理的流程、着色剂的测定范围、分散染料萃取溶剂的选择等做出技术调整,使该方法更为科学、合理和可操作性。介绍了新旧两个标准ISO 24362—2014和ISO 14362—2017的主要技术差别。以几种阳性样品为例,比较了两个标准测试结果的差别,并对产生差别的原因进行了验证试验。