20MnCr5圆棒锯切困难原因分析

某厂在锯切20MnCr5圆棒过程中锯条容易断裂，采用光学显微镜(OM)和扫描电子显微镜(SEM)等观察分析手段，对锯条容易断裂的原因进行分析。分析结果表明：锯条断裂的原因为加工20MnCr5过程中粘刀崩齿。针对此类加工缺陷，提出了相应的改进措施。     

Strategic environmental assessment in Romania: between benefits and constraints

This paper offers an overall picture of the importance of Strategic Environmental Assessment (SEA) in Romania and its opportunities and constraints. The role, scope and effectiveness of SEA in Romania are presented in two good practice examples and examined in order to highlight the strengths and weaknesses of the procedure at national and local scale. In practice, the number of SEA procedures is very high due to the legislation in force, and it is increasingly effective in decision-making about programmes and plans. SEA can be viewed as a great opportunity for the implementation of sustainable development in practice. It also continues to be an important procedural and decisional instrument for management and monitoring of socioeconomic development, spatial planning and environmental protection in Romania.     

Effectiveness of strategic environmental assessment in Poland

The paper presents the results of an evaluation of the effectiveness of SEA obtained as a result of a survey with the participation of stakeholders. In Poland, several hundred SEAs are conducted annually at the local and regional levels and several at the national level. Although the survey demonstrated that SEA is evaluated as effective or quite effective, the respondents pointed to several irregularities in the non-procedural dimension of effectiveness. The main ones in terms of substantive effectiveness are that SEA is rarely used to help develop plans/programmes and procedures are highly politicised. Moreover, low effectiveness in terms of variant assessment and cumulative impacts and nearly non-existent monitoring of the actual effects of implementing plans/programmes influence substantive effectiveness significantly. The respondents pointed to the problem resulting from the fact that plan-makers are unwilling to take into account the SEA recommended changes. They also emphasised that there are certain attempts to put pressure on SEA consultants to make the conclusions less stringent. Respondents indicate that in Poland the costs associated with conducting SEA often outweigh the profits. The research shows that the society is properly informed about SEA, but public involvement is still low.     

0CrMnTiH齿轮钢的淬透性计算及窄淬透性带控制

采用非线性方程计算法计算20CrMnTiH钢末端淬透性,只需利用生产实际数据加以修正,就能进行精确的淬透性计算和预报,与实测值偏差不超过2HRC。采用化学成分设计和控制,保证20CrMnTiH钢△[C]不超过0.007%,△[Si]波动不超过0.04%,△[Mn]、△[Cr]不超过0.02%,△[Ti]不超过0.01%,△[Alt]不超过0.010%,[Ni]、[Cu]不超过0.05%,[Mo]、[W]、[V]不超过0.03%,[P]、[S]不超过0.020%,[N]和[B]分别不超过0.006 0%和0.0005%,并控制碳偏析指数不超过1.035%,可实现国际先进水平的末端淬透性HRC4带宽控制。     

四川省桶装饮用水回收桶中铜绿假单胞菌的污染状况调查

目的 研究桶装饮用水回收桶中铜绿假单胞菌的污染情况以及清洗消毒工序消除铜绿假单胞菌的有效性。方法 参考GB 8538-2016《食品安全国家标准 饮用天然矿泉水检验方法》中铜绿假单胞菌滤膜过滤法, 对大中小型(各2家)桶装饮用水生产企业的清洗消毒工序前后的回收桶进行检测, 并对检出的微生物进行鉴定。 结果 大中小型生产企业的回收桶清洗消毒前的铜绿假单胞菌的检出率依次为75%、80%、70% (平均75%), 清洗消毒后的检出率依次为0、20%、45% (平均22%), 同时检出其他假单胞菌及不动杆菌。结论 桶装饮用水回收桶中铜绿假单胞菌的污染普遍比较严重, 中小型企业的现有清洗消毒工序不足以清除铜绿假单胞菌。     

An integrated method based on energy concentration for evaluating normally distributed spectra in the visible region

This work proposes a method to scientifically quantify the quality of normally distributed visible spectra from the viewpoint of energy concentration: high transmittance, narrow spectral width, and small deviation from the target wavelength in the target region. In the proposed method, the spectral width of the spectrum is compared with that of a reference spectrum before its deviation from the target wavelength is examined. After extracting the maximum transmittance, a performance index of the spectrum is obtained in a percentile value. The effectiveness of the proposed method was analytically proven by surface plasmon resonance-generated spectra with five design features and five variations in each feature. The results indicated that the proposed method not only substantially reflected the predictions made by intuitive visual inspections, but also avoided misleading and ambiguous results evaluated by existing full-width-at-half-maximum (FWHM) method, figure-of-merit (FOM) method, and coordinates on the chromaticity diagram. In addition to the numerical analysis, the experimentally obtained spectra of phosphors in white light emitting diodes were also evaluated. The results proved that the proposed method can successfully highlight the scaled performance difference among the spectra, which is not supported by existing FWHM and FOM methods by simultaneously considering the aforementioned three characteristics of a spectrum.     

Efficiency and effectiveness enhancement of an intercooler of two‐stage air compressor by low‐cost Al2O3/water nanofluids

The present study was aimed to utilize low‐cost alumina (Al₂O₃) nanoparticles for improving the heat transfer behavior in an intercooler of two‐stage air compressor. Experimental investigation was carried out with three different volume concentrations of 0.5%, 0.75%, and 1.0% Al₂O₃/water nanofluids to assess the performance of the intercooler, that is, counterflow heat exchanger at different loads. Thermal properties such as thermal conductivity and overall heat transfer coefficient of nanofluid increased substantially with increasing concentration of Al₂O₃ nanoparticles. Specific heat capacity of nanofluids were lower than base water. The intercooler performance parameters such as effectiveness and efficiency improved appreciably with the employment of nanofluid. The efficiency increased by about 6.1% with maximum concentration of nanofluid, that is, 1% at 3‐bar compressor load. It is concluded from the study that high concentration of Al₂O₃ nanoparticles dispersion in water would offer better heat transfer performance of the intercooler.