Optical properties of gadolinia-doped cubic yttria stabilized zirconia single crystals

Cubic zirconia single crystals stabilized with yttria and doped with Gd₂O₃ (0.10–5.00 mol%) were prepared by the optical floating zone method, and characterized by a combination of X-ray diffraction (XRD), and Raman, electron paramagnetic resonance (EPR), ultraviolet–visible (UV–Vis), photoluminescence excitation (PLE) and photoluminescence (PL) spectroscopic techniques. XRD and Raman spectroscopy showed that the crystal samples were all in the cubic phase, whereas the ceramic sample consisted of a mixture of monoclinic and cubic phases. The absorption spectrum showed four peaks at 245, 273, 308, and 314 nm in the ultraviolet region, and the optical band gap differed between samples with ≤3.00 mol% and those with >3.00 mol% Gd₂O₃. The emission spectrum showed a weak peak at 308 nm and a strong peak at 314 nm, which are attributed to the ⁶P_5/2 → ⁸S_7/2 and ⁶P_7/2 → ⁸S_7/2 transitions of Gd³⁺, respectively. The intensities of the peaks in the excitation and emission spectra increased with Gd³⁺ concentration, reached a maximum at 2.00 mol%, then decreased with higher concentrations. This quenching is considered to be the result of the electric dipole-dipole interactions, and this interpretation is supported by the Gd³⁺ EPR spectra, which showed progressive broadening with increasing Gd³⁺ concentration throughout the concentration range investigated.     

Improved optical and structural properties of cadmium sulfide nanostructures for optoelectronic applications

In this study, the effect of ZnO seed layer on the growth of uniform CdS nanostructures was investigated using chemical bath deposition technique. Besides, the influence of molar concentration of reagents on the surface morphology, structural and optoelectrical properties of the deposited CdS thin films were examined. The CdS nanostructures were grown on bare glass and ZnO/glass substrates with different reagent molar concentrations. The results indicated an improvement in the homogeneity and uniformity of the grown CdS nanostructures on ZnO seed layer which can be due to the low lattice mismatch between ZnO and CdS structures. The CdS/ZnO samples were optimized by changing the molar concentration of reagents. A three–dimensional intersecting vertical nanosheet morphology with hexagonal structure was obtained when modified chemical concentration of 0.5 M was applied. The XRD pattern of CdS nanosheets indicated the hexagonal phase of CdS which were strongly orientated along (002) plane. The elevated intensity of dominant peak related to this sample confirmed the improved crystal quality of this CdS nanostructure comparing to the other samples. The UV–Vis spectrum demonstrated a high absorption coefficient for CdS intersecting nanosheets which might be due to the high specific surface area and light trapping behavior of this sample. The photoluminescence study also showed an improvement in optical properties of optimized CdS nanostructures. In order to study the optoelectrical properties of CdS nanostructures, metal–semiconductor–metal photodetectors were fabricated with different CdS samples and their current–voltage characteristics were analyzed. The results indicated an enhancement in photosensitivity, responsivity, and speed of photodetectors based on optimized CdS nanostructures.     

Enhanced properties for visible-light-driven photocatalysis of Ag nanoparticle modified Bi2MoO6 nanoplates

The visible light driven Bi₂MoO₆ photocatalyst doped with different contents of Ag nanoparticles was successfully synthesized by a combination of hydrothermal and sonochemical methods. The as-synthesized samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning and transmission electron microscopy (SEM and TEM) and UV–visible spectroscopy to investigate crystalline structure, morphology, composition and photocatalytic properties. XRD patterns and TEM images of the samples revealed pure phase orthorhombic Bi₂MoO₆ nanoplates without any detection of Ag dopant due to its low concentration and very tiny particle size. TEM images showed that Ag nanoparticles with the size of 10–15 nm were dispersed randomly on the surface of Bi₂MoO₆. The XPS analysis of Ag/Bi₂MoO₆ nanocomposites revealed the presence of additional metallic Ag. Photocatalytic activities of the Ag/Bi₂MoO₆ nanocomposites were evaluated by determining the degradation of rhodamine B (RhB) under visible light radiation. In this research, the 10 wt% Ag/Bi₂MoO₆ nanocomposites showed the best photocatalytic activity. The results suggest that the dispersion of Ag nanoparticles on the surface of Bi₂MoO₆ significantly enhances its photocatalytic activity.     

Influence of propyl alcohol addition during processing of molybdenum trioxide powders: Observation of novel dual-wavelength excitation photochromism

The novel dual-wavelength excitation photochromic molybdenum trioxide (MoO₃) powders are fabricated successfully via the hydrothermal method by the addition of propyl alcohol. The samples were fully characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet–visible diffuse reflectance spectroscopy (UV–vis), and colorimetry. The characteristic spectrum of XRD demonstrates that the as-obtained products are highly pure. The results show that the flowerlike MoO₃ sample with the inducer of propyl alcohol has better photochromic properties, which was analyzed by colorimetry. It is shown that both of the samples exhibit a strong adsorption band between 250 and 400 nm in the UV range. Moreover, the UV–vis spectra shows that MoO₃ synthesized with added propyl alcohol absorbs light not only between 250 and 400 nm but also displays an additional band between 500 and 800 nm, demonstrating novel dual-wavelength excitation photochromic properties.     

Evaluation of particle recovery from microalgae

Coccoliths are micro-structured biomineral particles found in cell protective covering layers of coccolithophore species. They are mainly composed of CaCO₃ and their individual crystal entities are arranged in such a way that they construct complex and unique structures. This complexity is found down to the individual particle level and appears to have promising properties to offer. This study focuses on the essential step prior to any kind of implementation, which is the recovery of the material. It summarizes cleaning protocols found in literature, compares them for the first time for the same freshly cultivated material and addresses challenges that still need to be overcome. Further, it highlight the advantages and disadvantages of the best cleaning protocols, suggests optimizations with promising results and uses size distribution measurements to analyse the recovery efficiency. To that end, further characterization techniques, new for coccoliths, are introduced and used to improve our current knowledge of the particles behaviour.     

Steel slag waste combined with melamine pyrophosphate as a flame retardant for rigid polyurethane foams

To explore the potential application of industrial waste, steel slag powder in combination with melamine pyrophosphate (MPP) was adopted to improve the flame retardancy of rigid polyurethane foam (RPUF). The incorporation of steel slag slightly reduced the thermal conductivity of the resulting flame-retardant RPUF samples. The addition of MPP and/or steel slag did not significantly alter the thermal stability in terms of T_-10% and T_max but did obviously increase the T_-50% value, suggesting the improved thermal resistance of the residues. The coaddition of MPP and steel slag into RPUF resulted in higher LOI values and lower peak heat release rates than the samples incorporating either MPP or steel slag alone. The superior flame retardancy could be attributed to MPP promoting char formation, which then acted as a barrier at the beginning of RPUF thermal decomposition; simultaneously, the thermally stable inorganics in the steel slag powder strengthened the thermal resistance of this char layer.     

拉曼光谱技术在农产品药物残留检测中的应用

近年来,农产品药物残留超标引发了一系列食品安全问题,为了保障国家食品安全、保护消费者健康,需要对农产品中的药物残留进行定性定量检测。表面增强拉曼散射技术 (Surface-enhanced Raman scattering , SERS) 是一种极具吸引力的工具,可用于高效检测农药残留。本文介绍了表面增强拉曼光谱检测技术的概况,简介了拉曼增强基底,分析了表面增强拉曼光谱技术在药物标准溶液、农产品(肉类、水产品、果蔬和其他部分农产品等)药物残留检测领域中的研究现状,并针对当前农产品药物残留检测的发展趋势进行前景展望。     

Challenges and solutions of optical-based nondestructive quality inspection for robotic fruit and vegetable grading systems: A technical review

BackgroundOptical techniques, including computer vision, spectral imaging, near-infrared technology and other emerging imaging and spectroscopy techniques, have been rapidly developing and widely applied in fruit and vegetable grading systems for nondestructive quality inspecting and grading over the past decades. However, automatic detection of quality and grading is still difficult due to some still existing challenges, which are the key of blocking their commercialization in robotic fruit and vegetable grading systems. The challenges include the following aspects: the influence of physical and biological variability, whole surface detection, discrimination between defects and stems/calyxes, unobvious defect detection, robustness of the features and algorithms, as well as rapid optical detection system development. These challenges can reduce the fruit or vegetable quality inspection accuracy, thus greatly reducing automatic level of the quality inspecting and grading machines.Scope and approachAs agricultural engineers with about eight years of technical experience in fruit grading systems, we believe the ultimate goal of each scientific research should seek its task in serving the engineering. So, we have made many attempts to solve the challenges and increase the automation of the grading machines.Key findings and conclusionsThe review gives a detailed summary about the challenges and solutions of optical-based nondestructive quality inspection for fruit or vegetable grading systems from the perspective of engineering. Particular attention has been paid to the techniques that can improve the automation degree of the grading robot in this review. The advantages and disadvantages of the solutions are compared and discussed. Additionally, the remaining engineering challenges and future trends are also discussed.     

Design of data feature-driven 1D/2D convolutional neural networks classifier for recycling black plastic wastes through laser spectroscopy

In this study, two types of convolutional neural network (CNN) classifiers are designed to handle the problem of classifying black plastic wastes. In particular, the black plastic wastes have the property of absorbing laser light coming from spectrometer. Therefore, the classification of black plastic wastes remains still a challenging problem compared to classifying other colored plastic wastes using existing spectroscopy (i.e., NIR). When it comes the classification problem of black plastic wastes, effective classification techniques by the laser spectroscopy of Fourier Transform-Infrared Radiation (FT-IR) with Attenuated Total Reflectance (ATR) and Raman to analyze the classification problem of black plastic wastes are introduced. Due to the strong ability of extracting spatial features and remarkable performance in image classification, 1D and 2D CNN through data features are designed as classifiers. The technique of chemical peak points selection is considered to reduce data redundancy. Furthermore, through the selection of data features based on the extracted 1D data with peak points is introduced. Experimental results demonstrate that 2DCNN classifier designed with the help of 2D data feature selection as well as 1DCNN classifier shows the best performance compared with other reported methods for classifying black plastic wastes.