Methods and mechanisms for uniformly refining deformed mixed and coarse grains inside a solution-treated Ni-based superalloy by two-stage heat treatment

The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatment experiments include an aging annealing treatment(AT)and a subsequent recrystallization annealing treatment(RT).The object of AT is to precipitate some δ phases and consume part of storage energy to inhibit the grain growth during RT,while the RT is to refine mixed and coarse grains by recrystallization.It can be found that the recrystallization grains will quickly grow up to a large size when the AT time is too low or the RT temperature is too high,while the deformed coarse grains cannot be eliminated when the AT time is too long or the RT temperature is too low.In addition,the mixed microstructure composed of some abnormal coarse recrystallization grains(ACRGs)and a large number of fine grains can be observed in the annealed specimen when the AT time is 3 h and RT tem-perature is 980℃.The phenomenon attributes to the uneven distribution of δ phase resulted from the heterogeneous deformation energy when the AT time is too short.In the regions with a large number of δ phases,the recrystallization nucleation rate is promoted and the growth of grains is limited,which results in fine grains.However,in the regions with few δ phases,the recrystallization grains around grain boundaries can easily grow up,and the new recrystallization nucleus is difficult to form inside grain,which leads to ACRGs.Thus,in order to obtain uniform and fine annealed microstructure,it is a prereq-uisite to precipitate even-distributed δ phase by choosing a suitable AT time,such as 12 h.Moreover,a relative high RT temperature is also needed to promote the recrystallization nucleation around δ phase.The optimal annealing parameters range for uniformly refining mixed crystal can be summarized as:900℃×12 h+990℃×(40-60 min)and 900℃×12 h+1000℃×(10-15 min).     

Reduced texaphyrin: A ratiometric optical sensor for heavy metals in aqueous solution

We report here a water-soluble metal cation sensor system based on the as-prepared or reduced form of an expanded porphyrin, texaphyrin. Upon metal complexation, a change in the redox state of the ligand occurs that is accompanied by a color change from red to green. Although long employed for synthesis in organic media, we have now found that this complexation-driven redox behavior may be used to achieve the naked eye detectable colorimetric sensing of several number of less-common metal ions in aqueous media. Exposure to In(III), Hg(II), Cd(II), Mn(II), Bi(III), Co(II), and Pb(II) cations leads to a colorimetric response within 10 min. This process is selective for Hg(II) under conditions of competitive analysis. Furthermore, among the subset of response-producing cations, In(III) proved unique in giving rise to a ratiometric change in the ligand-based fluorescence features, including an overall increase in intensity. The cation selectivity observed in aqueous media stands in contrast to what is seen in organic solvents, where a wide range of texaphyrin metal complexes may be prepared. The formation of metal cation complexes under the present aqueous conditions was confirmed by reversed phase high-performance liquid chromatography, ultra-violet-visible absorption and fluorescence spectroscopies, and high-resolution mass spectrometry.     

空间的力量 新奥胡斯大学医院

正新奥胡斯大学医院是丹麦第一个超大型的医院案例,也是一个具有"康复医疗"概念的、超现代的国际先锋作品。医院的建筑设计通过系统运用"信息和循证"的工作方法,践行了"康复建筑"的综合理念。其"信息和循证"的方法是利用对现存建筑的研究和评估,以提供最有效的信息来创建最佳的康复建筑。从单人病房的设计、日光和光线的利用,以及景观和花园空间的设计,旨在尽量满足病人的需求,提升     

A boronic acid-based fluorescent hydrogel for monosaccharide detection

A boronic acid-based anthracene fluorescent probe was functionalised with an acrylamide unit to incorporate into a hydrogel system for monosaccharide detection. In solution, the fluorescent probe displayed a strong fluorescence turn-on response upon exposure to fructose, and an expected trend in apparent binding constants, as judged by a fluorescence response where D-fructose>D-galactose>D-mannose>D-glucose. The hydrogel incorporating the boronic acid monomer demonstrated the ability to detect monosaccharides by fluorescence with the same overall trend as the monomer in solution with the addition of D-fructose resulting in a 10-fold enhancement (≤0.25 mol/L).     

AA7075高强铝合金热冲压流变行为本构模型对比研究

在热冲压过程中,AA7075高强铝合金板料经充分固溶后移入室温模具进行冲压成形并淬火。为表征AA7075铝合金在热冲压工艺中的变形行为,在温度200~480℃、应变速率0.01~10s-1范围内进行了高温拉伸试验。基于Arrhenius类型本构模型、Johnson-Cook模型以及Zerilli-Armstrong模型提出了多种修正本构模型,并应用实验所获流变曲线进行了拟合。提出的修正模型通过将模型参数表示为应变、应变速率及温度相关的多项式函数耦合了应变、应变速率及温度对流变应力的影响,并通过均方误差(MSE)以及相关系数R值对模型流变应力预测准确性进行了评价。结果表明,修正的Johnson-Cook模型能够更加准确的预测AA7075高温流变行为。     

Behavior of ZrO2-C Refractories in Thin-strip Casting of Steel

Zirconia graphite refractory is used as a core-nozzle in the thin-strip casting of steel. Post-mortem analysis of used refractory was performed in an effort to establish the failure mechanism. Corrosion behavior was studied against molten steel with Mn O- SiO 2based liquid inclusions. Corrosion of these materials involves dissolution and oxidation of graphite in the matrix followed by penetration of liquid slag leading to degradation of ZrO 2particles. Thermodynamic equilibrium calculations were performed to study this corrosion mechanism.     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.67–xYxBa0.23Ca0.1MnO3 compounds（x=0.10 and x=0.15）

The critical properties of the mixed manganite La0.67–x Y x Ba0.23Ca0.1Mn O3 with x=0.10 and x=0.15 around the paramagnetic(PM)-ferromagnetic(FM) phase transition were investigated through various techniques. These involved modified Arrott plots, Kouvel-Fisher method and Widom scaling relation. Magnetic data, analyzed in the critical region, using the above methods, yielded the critical exponents for(x=0.10) La0.57Y0.10Ba0.23Ca0.1Mn O3(β=0.312±0.002 and γ=1.147±0.003 at T C=299.23±0.05 K). Moreover, the estimated critical exponents of(x=0.15) La0.52Y0.15Ba0.23Ca0.1Mn O3 were β=0.286±0.004 and γ=0.943±0.002 at T C=289.53±0.06 K. The critical exponents’ values were close to the theoretical values of 3D-Ising model and tricritical mean-field model. These results suggested that the present composition should be close to a tricritical point in the La0.67–x Y x Ba0.23Ca0.1Mn O3 phase diagram. Expressing the field dependence as ΔS M∝H n allowed us to establish a relationship between the exponent n and the critical exponents of the material and to propose a phenomenological universal curve for the field dependence of ΔS M.     

聚胺抗黏附剂在纺织品抗菌整理中的应用

尽管抗菌整理剂可赋予纺织品及其他商品良好的抗菌效果,但由于其可能会对公众健康和环境造成影响,而备受环境组织、立法机构和全球消费者关注。因此,采用新型抗菌技术——使用无争议的活性剂(如银盐、铜盐或某些有机杀虫剂),成为纺织企业重要的竞争优势。德国纺织研究中心西北公司(DTNW)与行业合作伙伴的研究项目"聚胺抗黏附剂",开发了一种能有效抑制纺织品上生物附着的蛋白质和细菌的,新型的不含杀虫剂的可行方法,并提供了有价值的信息。此外,通过改变聚胺抗黏附剂的组成,也可获得作为非浸出接触杀菌剂的涂层,该涂层可广泛应用于功能性聚合物。     

针织物的3D打印

3D打印属于叠加式制造方式,可创造出多种三维模型。3D打印的缺点之一是制造大型物体时耗时较长。因此,目前最先进的技术仅限于制造小型物体。3D打印与其他材料相结合有助于克服由印刷时间所造成的缺点。如使用传统技术制造的大型物体的特定位置,可由3D打印完成,以创建所需的功能。此前,将聚合物3D打印在机织物上的试验研究结果表明:印刷材料和机织物结构的不同,导致二者之间的黏附力差异较大。该结果也适用于针织物的3D打印。试验所用材料均为聚乳酸(PLA),因其与机织物的黏合力最强。熔融沉积成型(FDM)打印项目,研究了针织织物种类、材料、结构、织机机号等变化,对喷嘴的尺寸、打印高度、印刷床温度等的影响,并对结果进行了总结。同时,对针织物3D打印过程中必需进行的测试进行了展望。     

ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能（英文）

分析ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能。运用密实堆积和动态脆性指数模型从理论上确定合金的成分。采用铜模吸铸法在氩气保护下制备圆柱形和圆锥形铸锭。用X射线衍射表征圆锥形铸锭以便确定非晶结构。结果表明:两种合金的临界非晶直径为3 mm。用差示扫描量热法(DSC)分析其热行为,加热速率分别为0.5、0.67和0.83 K/s。γ参数、过冷液相区ΔT_x和约化玻璃转变温度T_(rg)等这些实验所得的参数均表明其具有高的非晶形成能力。非晶成分显示其脆性指数为40。合金的压缩试验采用的应变速率为0.016 s~(-1),得到弹性模量约为83 GPa,总应变约为5%,屈服强度为1.6 GPa,硬度为4 GPa。运用密实堆积和动态脆性指数模拟可以预测ZrCuAlNi系合金的非晶形成成分。