Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

大型水电工程前期准备延期的影响类型分析

讨论了成本考虑不足与水电工程项目施工前准备阶段延期的负面影响,以及发展中国家不能及时有效地交付项目与稀有资源浪费间的冲突。建议项目员工、开发商、政府官员和国际金融机构重视延期成本,找到成本与效益的平衡点。     

ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能（英文）

分析ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能。运用密实堆积和动态脆性指数模型从理论上确定合金的成分。采用铜模吸铸法在氩气保护下制备圆柱形和圆锥形铸锭。用X射线衍射表征圆锥形铸锭以便确定非晶结构。结果表明:两种合金的临界非晶直径为3 mm。用差示扫描量热法(DSC)分析其热行为,加热速率分别为0.5、0.67和0.83 K/s。γ参数、过冷液相区ΔT_x和约化玻璃转变温度T_(rg)等这些实验所得的参数均表明其具有高的非晶形成能力。非晶成分显示其脆性指数为40。合金的压缩试验采用的应变速率为0.016 s~(-1),得到弹性模量约为83 GPa,总应变约为5%,屈服强度为1.6 GPa,硬度为4 GPa。运用密实堆积和动态脆性指数模拟可以预测ZrCuAlNi系合金的非晶形成成分。     

由刨花金属短纤维制备技术用金属纱线

目前,德国纺织机械和高性能材料技术研究所(ITM)正对刨花金属短纤维纺制纱线的工艺过程进行广泛的调查研究。为顺利纺纱,必须考虑这类纤维的高耐磨性、高脆性和高刚性等特性,以及它们较高的塑性变形和粘滑运动倾向。基于传统成纱工艺,开发出以刨花金属短纤维为原料,经拉伸断裂、牵伸和纺纱过程制备纯金属纱线的纺纱工艺链。基于目前的研究,由刨花金属短纤维制备纯金属纱线的可行性已得以证实。所得金属纤维在高性能、低成本技术应用方面具有较高的潜力。     

Effect of the addition of rare earths on the activity of alumina supported copper cobaltite in CO oxidation,CH4 oxidationand NO decomposition

The effect of the addition of small amounts of rare earths(Ln=La, Ce, Nd and Gd) to alumina supported copper-cobalt spinel oxide on the catalysts efficiency in CO and CH4 oxidation and in NO decomposition was investigated. Samples of Ln/Cu Co/Al catalyst were prepared and characterized by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), atomic absorption spectroscopy(AAS), scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS), H2-temperature-programmed reduction(H2-TPR), electron paramagnetic resonance(EPR) spectroscopy and low temperature nitrogen adsorption. The results showed that the addition of rare earths changed the surface state of the alumina supported copper-cobalt spinel catalyst. As a result, partial reduction of copper species was observed as well as migration of these species between the surface and the bulk. The Ln/Cu Co/Al catalysts behaved differently in oxidation and reduction processes. In oxidation processes where oxide structure was important, Ce/Cu Co/Al and Nd/Cu Co/Al were the most active catalysts. The catalyst Ce/Cu Co/Al was the most active in the oxidation reactions because of the availability and favorable surface distribution of the redox couples Cu+/Cu2+ and Ce3+/Ce4+. In NO decompostion, Ln-modified catalysts significantly improved the selectivity of the process to N2.     

Critical parameters near the ferromagnetic-paramagnetic phase transition in La0.67–xYxBa0.23Ca0.1MnO3 compounds（x=0.10 and x=0.15）

The critical properties of the mixed manganite La0.67–x Y x Ba0.23Ca0.1Mn O3 with x=0.10 and x=0.15 around the paramagnetic(PM)-ferromagnetic(FM) phase transition were investigated through various techniques. These involved modified Arrott plots, Kouvel-Fisher method and Widom scaling relation. Magnetic data, analyzed in the critical region, using the above methods, yielded the critical exponents for(x=0.10) La0.57Y0.10Ba0.23Ca0.1Mn O3(β=0.312±0.002 and γ=1.147±0.003 at T C=299.23±0.05 K). Moreover, the estimated critical exponents of(x=0.15) La0.52Y0.15Ba0.23Ca0.1Mn O3 were β=0.286±0.004 and γ=0.943±0.002 at T C=289.53±0.06 K. The critical exponents’ values were close to the theoretical values of 3D-Ising model and tricritical mean-field model. These results suggested that the present composition should be close to a tricritical point in the La0.67–x Y x Ba0.23Ca0.1Mn O3 phase diagram. Expressing the field dependence as ΔS M∝H n allowed us to establish a relationship between the exponent n and the critical exponents of the material and to propose a phenomenological universal curve for the field dependence of ΔS M.     

铁素体渗氮工艺模拟

纯铁的莱勒图被广泛用于选择合金钢的渗氮工艺。本文首次采用计算热力学来确定AISI 4140钢的莱勒图。研究表明，AISI 4140钢的莱勒图与纯铁的存在明显差异。对AISI 4140钢进行了渗氮试验，目的是验证计算热力学的预测结果。扫描电镜结果显示化合物层中存在两种相，利用透射电镜对化合物层与扩散层界面的研究结果证实了γ′-Fe4N和ε-Fe2－3（C，N）相的共存。这些试验结果与用计算热力学建立的AISI 4140钢莱勒图高度吻合。     

表面粗糙和带槽的湿式离合器接合的有限元模型

已经开发了一个有限元模型,研究表面粗糙和带槽纸质可渗透的湿式离合器的接合特性。采用有限元方法(Galerkin)离散修正雷诺和力平衡方程式,采用等参量方程式解所描述的有关内何学。通过Patir和Cheng(1978)的通用流量模型模拟表面粗糙度的影响。在表面粗糙状况下,采用Greenwond和William son(1966)方法计算负荷分配,采用开发的有限元模型研究所加负荷的影响,以及湿式离合器摩擦材料的渗透率和槽出入口尺寸的接合特性(即转矩、油压、接合时间和油膜厚度)。研究结果表明,所加负荷、摩擦材料渗透率和槽宽度对接合特性的影响显著。高的配合面压力增大了峰值和减少了接合时间但显著增大了峰值转矩,宽油槽减少峰值转矩和增加了接合时间。对于本模型油槽深度对接合特性的影响不太明显。     

缺乏地质封存条件地区开展CCUS项目集群化建设的可行性研究:以江西省为例

碳捕集、利用与封存（CCUS）技术是我国实现碳达峰和碳中和目标的关键技术。良好的 源汇匹配条件是CCUS项目部署的重要先决条件。然而我国存在一些缺乏地质封存条件的地区，虽然区域内拥有较多工业排放源，但缺少近距离的潜在封存地，影响了企业的投资决策。CCUS项目的集群化建设可以通过共用CO2运输和封存设备，降低项目的整体成本，集群化建设能否推动缺乏地质封存条件地区CCUS项目的部署，需要进一步研究。以江西省为例，选取南昌市和萍乡市的7个公开披露碳排放信息的企业，分别开展年捕集量为 100万t的碳捕集项目，通过管网优化并选取江汉盆地为潜在封存地，建立成本分析模型 并计算单位减排成本。结果显示，虽然集群项目的运输距离长达513 km，但最终的CO2 减排成本仅为473.04元/t，而且还存在进一步下降的可能。在缺乏地质封存条件的地区开展CCUS项目的集群化建设，可以成为利用CCUS技术助力碳中和的一个重要方式。     

一种用于故障隔离的参数区间包络线计算方法

基于参数区间的故障隔离方法的核心工具是区间判断阈值曲线,其计算一直是制约该方法发展的问题。参数区间动态轨迹包络线作为区间判断阈值曲线具有能够适用于多重参数故障隔离等优点,但包络线计算中的包裹效应问题在该领域内一直未能得到很好解决。介绍一种基于上、下函数的包络线计算方法,有别于区间算法计算的包络线随着迭代的进行而迅速变得肥大的可能性,采用该方法的仿真实验表明其计算的包络线的包裹效应得到很大程度上的减轻,可有效用于故障隔离的区间判断。