Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

Flash Lamps as Ignition and Initiation Sources of the VS-2 Pyrotechnic Composition

In the present work it is found that the pyrotechnic composition VS-2 can be initiated with flash lamps IFC-500 and EVIS. VS-2 pyrotechnic composition contains 90% of mercury（Ⅱ） 5-hydrazinotetrazolate perchlorate and 10% of optically transparent copolymer of 2-methyl-5-vinyltetrazole and methacrylic acid （PVMT）. We have found that the flash lamps make it possible to initiate combustion of VS-2 composition with its transition to detonation both in cylindrical charges placed in brass caps of 5 mm diameter and 2 mm high， and film charges with 10 mm×80 mm in size and surface weights of 60 mg·cm^-2 and 90 mg·cm^-2， showing ignition delay times 10 μs and 3 μs， respectively. We also measured detonation velocities for VS-2 composition film charges， which were 4375-4505 m·s^-1 （of the charge being surface mass 60 mg·cm^-2） and 4221-4281 m·s^-1 （of the charge being surface mass 90 mg·cm^-2） and their blasting action on the aluminum plate. The depths of the normal shock wave imprints at the charge-barrier interface were 0.6-0.7 mm （for surface mass of the film charges 60 mg·cm^-2） and 1.2-1.3 mm （for surface mass of the film charges 90 mg·cm^-2）.     

关于COVID-19、膜脂质与公众健康（网络首发、推荐阅读）

冠状病毒具有一层脂质膜。虽然复制需要劫持宿主的RNA工具来合成病毒体蛋白，但必须将其包裹在脂质膜中，促其萌生以扩展感染。最近研究表明，某些必需脂肪酸可以抑制其复制活性。脂质膜通常被认为是水溶物的脂肪屏障，但它对细胞和亚细胞的功能是高度有序和组分特异性的，其对病毒外壳可能也有最佳的特异性。虽然复制中DNA、RNA和蛋白质组成不受饮食影响，但脂质膜受其影响。此外，自1960年代以来，人们就知道男性对这些必需脂肪酸和膜完整性不足的敏感性高于女性。有证据表明，花生四烯酸和二十二碳六烯酸具有抗病毒、免疫、抗炎、控制血压和消退素活性，因此，迫切需要考察它们在Covid-19预防和治疗中的地位，也需重新评估现行的膳食指导。当前，有关脑、神经、血管和免疫系统等富含膜系统对脂质需求还尚未被详细认识。毫无疑问，这些脂质在几百万年来塑造人类基因组方面具有重要意义，因此，如果这些膜脂质失衡将会使人类面临机体紊乱和感染风险，且男性比女性风险更大。     

寒区隧道冰害成因分析及冰柱生长发育试验研究

寒区隧道受多重因素影响容易发生渗水结冰现象，为研究该冰害形成原因和冰柱生长发育过程，将保健路隧道作为研究对象，利用现场监测和理论分析得出低温环境和水分入渗是导致冰害问题的主要原因。通过试验模拟冰柱生长发育过程，分析隧道、输电线路、桥梁等其他工程中相似的结冰现象，总结冰柱的生长形态和发育规律。结果表明:冰柱垂直生长速度远大于横向生长速度，后续水流沿着冰面呈规律性向下滴落，促成平均直径上大下小的生长形态；通过建立平衡方程，推算冰柱可能发育的最大长度，发现热通量、供水率是影响冰体尺寸的重要参数。依据上述现场调查和模拟试验所得结论，不仅可为隧道冰柱形成原因做出理论分析，也对类似工程实际具有指导意义，为隧道冰害防治提供新的研究思路。     

Feasibility study of large-scale mass customization 3D printing framework system with a case study on Nanjing Happy Valley East Gate

At present, the development and implementation of digital transformation are the keys to promoting high-quality industry development. The new digital fabrication method of robotic 3D printing is a research area being studied by many to tackle the issue of the declining productivity of traditional construction methods. Although many studies have been done, most of the current 3D printing projects are facing limitations in terms of scale. In order to bridge the gap, this article proposed a mass customization 3D printing framework system for large-scale projects. This article discusses how mass customization is made possible through the joint operation of the FUROBOT software and 3D printing hardware. By taking the east gate of Nanjing Happy Valley Plaza as a case study, the article demonstrates and studies the feasibility of the large-scale mass customization 3D printing framework system.     

Fe3O4-carbon spheres core–shell supported palladium nanoparticles: A robust and recyclable catalyst for suzuki coupling reaction

Suzuki-Miyaura (S-M) is regarded the most powerful way for synthesis biaryls, triaryls, or incorporating of substituted aryl moieties in organic preparation by the cross-coupling of aryl boronic acid with aryl halides using the Pd catalyst. This work reports the combining of the hydrothermal and microwave-assisted protocol to convert the glucose to magnetic carbon spheres (Fe₃O₄-CSPs) decorated with Pd nanoparticles (NPs) as the catalyst for Suzuki-Miyaura cross-coupling reactions. The physicochemical properties in the produced composite were examined using FESEM, HRTEM, nitrogen isotherms, Raman spectroscopy, FTIR, XPS, and XRD. The as-fabricated composite Pd/Fe₃O₄-CSPs is mostly spherical with a core–shell structure and possesses a great surface area of 253.2 m²·g^-1. Its catalytic performance demonstrates that the composite has excellent stability and high tolerance Suzuki-Miyaura cross-coupling reactions in 30 min at 80 ℃. Both activated and deactivated aryl halides provided excellent yield. The as-fabricated catalyst was recycled for up to four catalytic cycles without a substantial decline in performance. Moreover, this research offers a facile roadmap for synthesizing Pd/Fe₃O₄-CSPs composites and promoting the practical implementation of Pd/Fe₃O₄-CSPs catalysts for organic transformation processes.     

既有石结构民宅外走廊重建置换的加固分析

福建省既有石结构房屋保有量大，石结构房屋由石墙、石柱、石梁和石楼板这四种石构件堆砌组成，结构抗震性能极差。石结构房屋通常设有外走廊，外走廊相对于其他部位较为独立，在地震中和其他环境振动下极易倒塌。在既有石结构房屋未进行抗震加固前，为确保外走廊安全，提出拆除外走廊石构件，采用钢筋混凝土（ＲＣ）结构重建置换的加固方法。设计与分析表明:应当尽可能地增大ＲＣ构件的刚度，以减少地震作用下石结构房屋的侧向位移；ＲＣ构件与相邻的石构件应可靠连接。外走廊ＲＣ构件重建置换的加固方法可为类似石结构民宅加固提供参考。     

Advances in reduction of NOx and N2O1 emission formation in an oxy-fired fluidized bed boiler

Fossil fuel combustion is one of the major means to meet the mounting global energy demand. However, the increasing NO_x and N₂O emissions arising from fossil fuel combustion process have hazardous effects. Thus, mitigating these gases is vital to attain a sustainable environment. Interestingly, oxy-fuel combustion in fluidized bed for carbon capture and minimized NO_x emissions is strongly sustainable compare to the other approaches. It was assessed that NO_x formation and fuel-N conversion have significant limitation under oxy-fluidized bed compared to air mode and the mechanism of NO_x formation is still deficient and requires further development. In addition, this review paper discussed the potential of primary measure as low emission process with others supplementary techniques for feasible NO_x reduction. The influences of combustion mode, operating parameters, and reduction techniques such as flue gas recirculation, oxygen staging, biomass co-firing, catalyst, influence of fluidized bed design and structure, decoupling combustion and their merges are respectively evaluated. Findings show that significant minimization of NO_x emission can be achieved through combination of primary and secondary reduction techniques.     

Electron transfer mediator PCN secreted by aerobic marine Pseudomonas aeruginosa accelerates microbiologically influenced corrosion of TC4 titanium alloy

Titanium alloys possess excellent corrosion resistance in marine environments,thus the possibility of their corrosion caused by marine microorganisms is neglected.In this work,microbiologically influenced corrosion (MIC) of TC4 titanium alloy caused by marine Pseudomonas aeruginosa was investigated through electrochemical and surface characterizations during a 14-day immersion test.Results revealed that the unstable surface caused by P.aeruginosa resulted in exposure of Ti2O3 and severe pitting corrosion with maximum pit depth of 5.7 μm after 14 days of incubation.Phenazine-1-carboxy[ate (PCN),secreted by P.aeruginosa,promoted extracellular electron transfer (EET) and accelerated corrosion.Deletion of the phzH gene,which codes for the enzyme that catalyzes PCN production,from the P.aeruginosa genome,resulted in significantly decreased rates of corrosion.These results demonstrate that TC4 titanium alloy is not immune to marine MIC,and EET contributes to the corrosion of TC4 titanium alloy caused by P.aeruginosa.