Flash Lamps as Ignition and Initiation Sources of the VS-2 Pyrotechnic Composition

In the present work it is found that the pyrotechnic composition VS-2 can be initiated with flash lamps IFC-500 and EVIS. VS-2 pyrotechnic composition contains 90% of mercury（Ⅱ） 5-hydrazinotetrazolate perchlorate and 10% of optically transparent copolymer of 2-methyl-5-vinyltetrazole and methacrylic acid （PVMT）. We have found that the flash lamps make it possible to initiate combustion of VS-2 composition with its transition to detonation both in cylindrical charges placed in brass caps of 5 mm diameter and 2 mm high， and film charges with 10 mm×80 mm in size and surface weights of 60 mg·cm^-2 and 90 mg·cm^-2， showing ignition delay times 10 μs and 3 μs， respectively. We also measured detonation velocities for VS-2 composition film charges， which were 4375-4505 m·s^-1 （of the charge being surface mass 60 mg·cm^-2） and 4221-4281 m·s^-1 （of the charge being surface mass 90 mg·cm^-2） and their blasting action on the aluminum plate. The depths of the normal shock wave imprints at the charge-barrier interface were 0.6-0.7 mm （for surface mass of the film charges 60 mg·cm^-2） and 1.2-1.3 mm （for surface mass of the film charges 90 mg·cm^-2）.     

Advantages and disadvantages of nuclear reactions used in reactors or cyclotrons,in addition to a theoretical study based on photodisintegration on natural indium for 111Ag production

Production routes were recorded on available reactions for ¹¹¹Ag production from nuclear reactors or cyclotrons using a natural palladium target based on ¹¹⁰Pd（n, γ） and ¹¹⁰pd（d, n） reactions, respectively.^natCd（γ,x） based on ¹¹⁰Cd（γ, p） has also been studied as a prospective reaction for the production of ¹¹¹Ag. Unfortunately, these nuclear reactions are difficult to utilize because, in some cases, they reduce the specific activi...     

Fe3O4-carbon spheres core–shell supported palladium nanoparticles: A robust and recyclable catalyst for suzuki coupling reaction

Suzuki-Miyaura (S-M) is regarded the most powerful way for synthesis biaryls, triaryls, or incorporating of substituted aryl moieties in organic preparation by the cross-coupling of aryl boronic acid with aryl halides using the Pd catalyst. This work reports the combining of the hydrothermal and microwave-assisted protocol to convert the glucose to magnetic carbon spheres (Fe₃O₄-CSPs) decorated with Pd nanoparticles (NPs) as the catalyst for Suzuki-Miyaura cross-coupling reactions. The physicochemical properties in the produced composite were examined using FESEM, HRTEM, nitrogen isotherms, Raman spectroscopy, FTIR, XPS, and XRD. The as-fabricated composite Pd/Fe₃O₄-CSPs is mostly spherical with a core–shell structure and possesses a great surface area of 253.2 m²·g^-1. Its catalytic performance demonstrates that the composite has excellent stability and high tolerance Suzuki-Miyaura cross-coupling reactions in 30 min at 80 ℃. Both activated and deactivated aryl halides provided excellent yield. The as-fabricated catalyst was recycled for up to four catalytic cycles without a substantial decline in performance. Moreover, this research offers a facile roadmap for synthesizing Pd/Fe₃O₄-CSPs composites and promoting the practical implementation of Pd/Fe₃O₄-CSPs catalysts for organic transformation processes.     

Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

多伦多“波浪形”综合体

正近期,丹麦3XN建筑事务所赢得了多伦多东部湖湾区的(East Bayfront)一个新水滨综合体的建筑竞赛,该项目已通过第二期设计审查阶段,预计将于2018年底动工,并于2022年完工。建筑立面的设计灵感来自安大略湖的海浪,一层又一层的"波浪"是向外延伸的阳台,远远望去就像是绵延起伏的波浪。设计团队旨在创造一个迷人的城市海滨综合体,也将城市建筑融入周围环境之中。建筑综合体以两座"山峰"的形式逐渐向中央"山谷"降低,形成独特的建筑景观,并通过错位的布局,让每个单元的住户能获得最大的观景视野。"山谷"部分涵盖了共享设施,其中包括了社区空间、辽阔的户外露台以及游泳池。除了公寓以外,综合体内还设置了各种餐厅、咖啡厅以及商业空间。     

大型水电工程前期准备延期的影响类型分析

讨论了成本考虑不足与水电工程项目施工前准备阶段延期的负面影响,以及发展中国家不能及时有效地交付项目与稀有资源浪费间的冲突。建议项目员工、开发商、政府官员和国际金融机构重视延期成本,找到成本与效益的平衡点。     

宁夏红寺堡盆地隐伏古隆起成因机制及其对区域沙漠化的影响

目前对于青藏高原东北缘活动构造研究多集中于活动断裂带的活动性,而对夹持于其间的沉积盆地构造格架及活动性研究甚少。以夹持于烟筒山断裂与牛首山—罗山断裂之间的宁夏红寺堡盆地为研究对象,采用重力资料重处理解译、音频大地电磁测深(AMT)和地震勘探相结合,揭示红寺堡盆地隐伏构造特征,并进一步采用盆山一体化思路分析隐伏构造的成因机制及其对区域沙漠化的控制作用。结果表明:青藏高原在中新世末发生强烈的NE向推挤、扩展和隆升,红寺堡盆地由坳陷盆地转变为挠曲盆地; 在青藏高原NE向扩展的影响下,烟筒山断裂发生强烈的逆冲作用,古生代—中生代基底逆冲于古近系—新近系之上,受构造变形影响的最新地层为中新统彰恩堡组; 红寺堡盆地内的隐伏古隆起呈NW—SE向,与烟筒山构造带具有相同的构造动力学背景,受青藏高原NE向扩展影响形成于中新世末,并且至今仍具有活动性; 隐伏古隆起周缘断裂的活动破坏了地表稳定性、蓄水能力和地表植被,导致区域沙漠化呈现有规律的NW—SE向带状展布。该研究成果对于宁夏红寺堡盆地区域稳定性评价及沙漠化的综合治理具有现实指导意义。     

Protection and control of microgrids usingdynamic state estimation

High penetration of Converter Interfaced Generations (CIGs) presents challenges in both microgrid (μGrid) circuit and other system with CIG resources, such as wind farms and PV plants. Specifically, protection challenges are mainly brought by the insufficient separation between fault and load currents, especially for μGrids in islanded operation, and the short connection length in μGrids. In addition, CIG resources exhibit limited inertia and weak coupling to any rotating machinery, which can result in large transients during disturbances. To address the above challenges, this paper proposes a Dynamic State Estimation (DSE) based algorithm for protection and control of systems with substantial CIG resources such as a μGrid. It requires a high-fidelity dynamic model and time domain (sampled value) measurements. For μGrid circuit protection, the algorithm dependably and securely detects internal faults by checking the consistency between the circuit model and available measurements. For CIG control, the algorithm estimates the frequency at other parts of a μGrid using CIG local information only and then utilizes it to provide supplementary feedback control. Simulation results prove that DSE based protection algorithm detects internal faults faster, ignores external faults and has improved sensitivity towards high impedance faults when compared to conventional protection methods. DSE based CIG control scheme also minimizes output oscillation and transient during system disturbances.     

ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能（英文）

分析ZrCuAlNi系大块金属玻璃的非晶形成能力、热学和力学性能。运用密实堆积和动态脆性指数模型从理论上确定合金的成分。采用铜模吸铸法在氩气保护下制备圆柱形和圆锥形铸锭。用X射线衍射表征圆锥形铸锭以便确定非晶结构。结果表明:两种合金的临界非晶直径为3 mm。用差示扫描量热法(DSC)分析其热行为,加热速率分别为0.5、0.67和0.83 K/s。γ参数、过冷液相区ΔT_x和约化玻璃转变温度T_(rg)等这些实验所得的参数均表明其具有高的非晶形成能力。非晶成分显示其脆性指数为40。合金的压缩试验采用的应变速率为0.016 s~(-1),得到弹性模量约为83 GPa,总应变约为5%,屈服强度为1.6 GPa,硬度为4 GPa。运用密实堆积和动态脆性指数模拟可以预测ZrCuAlNi系合金的非晶形成成分。