Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

Methods and mechanisms for uniformly refining deformed mixed and coarse grains inside a solution-treated Ni-based superalloy by two-stage heat treatment

The uniform refinement mechanisms and methods of deformed mixed and coarse grains inside a solution-treatment Ni-based superalloy during two-stage annealing treatment have been investigated.The two-stage heat treatment experiments include an aging annealing treatment(AT)and a subsequent recrystallization annealing treatment(RT).The object of AT is to precipitate some δ phases and consume part of storage energy to inhibit the grain growth during RT,while the RT is to refine mixed and coarse grains by recrystallization.It can be found that the recrystallization grains will quickly grow up to a large size when the AT time is too low or the RT temperature is too high,while the deformed coarse grains cannot be eliminated when the AT time is too long or the RT temperature is too low.In addition,the mixed microstructure composed of some abnormal coarse recrystallization grains(ACRGs)and a large number of fine grains can be observed in the annealed specimen when the AT time is 3 h and RT tem-perature is 980℃.The phenomenon attributes to the uneven distribution of δ phase resulted from the heterogeneous deformation energy when the AT time is too short.In the regions with a large number of δ phases,the recrystallization nucleation rate is promoted and the growth of grains is limited,which results in fine grains.However,in the regions with few δ phases,the recrystallization grains around grain boundaries can easily grow up,and the new recrystallization nucleus is difficult to form inside grain,which leads to ACRGs.Thus,in order to obtain uniform and fine annealed microstructure,it is a prereq-uisite to precipitate even-distributed δ phase by choosing a suitable AT time,such as 12 h.Moreover,a relative high RT temperature is also needed to promote the recrystallization nucleation around δ phase.The optimal annealing parameters range for uniformly refining mixed crystal can be summarized as:900℃×12 h+990℃×(40-60 min)and 900℃×12 h+1000℃×(10-15 min).     

寒区隧道冰害成因分析及冰柱生长发育试验研究

寒区隧道受多重因素影响容易发生渗水结冰现象，为研究该冰害形成原因和冰柱生长发育过程，将保健路隧道作为研究对象，利用现场监测和理论分析得出低温环境和水分入渗是导致冰害问题的主要原因。通过试验模拟冰柱生长发育过程，分析隧道、输电线路、桥梁等其他工程中相似的结冰现象，总结冰柱的生长形态和发育规律。结果表明:冰柱垂直生长速度远大于横向生长速度，后续水流沿着冰面呈规律性向下滴落，促成平均直径上大下小的生长形态；通过建立平衡方程，推算冰柱可能发育的最大长度，发现热通量、供水率是影响冰体尺寸的重要参数。依据上述现场调查和模拟试验所得结论，不仅可为隧道冰柱形成原因做出理论分析，也对类似工程实际具有指导意义，为隧道冰害防治提供新的研究思路。     

既有石结构民宅外走廊重建置换的加固分析

福建省既有石结构房屋保有量大，石结构房屋由石墙、石柱、石梁和石楼板这四种石构件堆砌组成，结构抗震性能极差。石结构房屋通常设有外走廊，外走廊相对于其他部位较为独立，在地震中和其他环境振动下极易倒塌。在既有石结构房屋未进行抗震加固前，为确保外走廊安全，提出拆除外走廊石构件，采用钢筋混凝土（ＲＣ）结构重建置换的加固方法。设计与分析表明:应当尽可能地增大ＲＣ构件的刚度，以减少地震作用下石结构房屋的侧向位移；ＲＣ构件与相邻的石构件应可靠连接。外走廊ＲＣ构件重建置换的加固方法可为类似石结构民宅加固提供参考。     

MC尼龙重载承压地板井下巷道铺设工艺研究

我国煤矿井下无轨运输混凝土路面铺设成本高，并且受开采应力、巷道底板地质条件等影响，其应用受到限制。重载车辆的频繁碾压极易使路面发生损坏，从而影响正常开采效率还带来高昂的维护费用。为解决这一问题，采用MC尼龙重载承压地板代替传统混凝土铺设路面，进行了MC尼龙重载承压地板井下巷道铺设的工艺研究。通过对承压板井下铺设方案的制定、承压地板型式的研发、地板的整体连接及稳定性研发等，实现了高效的作业效率，更为安全、清洁的作业环境以及更低的成本，进而达到了“以塑代混凝土”的实际示范意义。该铺设工艺为井下无轨运输的采区路面、工作面搬家通道、临时路面以及其他应急路面、硐室地板的应用提供了良好的方案借鉴。     

Reduced texaphyrin: A ratiometric optical sensor for heavy metals in aqueous solution

We report here a water-soluble metal cation sensor system based on the as-prepared or reduced form of an expanded porphyrin, texaphyrin. Upon metal complexation, a change in the redox state of the ligand occurs that is accompanied by a color change from red to green. Although long employed for synthesis in organic media, we have now found that this complexation-driven redox behavior may be used to achieve the naked eye detectable colorimetric sensing of several number of less-common metal ions in aqueous media. Exposure to In(III), Hg(II), Cd(II), Mn(II), Bi(III), Co(II), and Pb(II) cations leads to a colorimetric response within 10 min. This process is selective for Hg(II) under conditions of competitive analysis. Furthermore, among the subset of response-producing cations, In(III) proved unique in giving rise to a ratiometric change in the ligand-based fluorescence features, including an overall increase in intensity. The cation selectivity observed in aqueous media stands in contrast to what is seen in organic solvents, where a wide range of texaphyrin metal complexes may be prepared. The formation of metal cation complexes under the present aqueous conditions was confirmed by reversed phase high-performance liquid chromatography, ultra-violet-visible absorption and fluorescence spectroscopies, and high-resolution mass spectrometry.     

以金属氧化物为原料改进燃烧法合成γ-LiAlO_2（英文）

提出一种合成γ-LiAlO_2的替代解决方案—改进燃烧法直接合成γ-LiAlO_2,并将其用于相对简单的反应体系中,原料为非氧化性化合物如Al_2O_3和LiOH,燃料为尿素。采用1:1、1.5:1和2:1的非化学计量Li/Al摩尔比,在900和1000°C下反应5 min,制备LiAlO_2,并对其组织和结构进行表征。考察Li/Al摩尔比对材料形貌和高γ射线辐照下材料稳定性的影响。结果表明,所得粉体的晶体结构为?-LiAlO_2和?-LiAlO_2,其取决于Li/Al摩尔比。因此,用该方法可以成功合成微砖状、多面体状和层状?-LiAlO_2,而无需任何后续处理。γ辐照结果表明,所得到的?-LiAlO_2不分解,只形成少量的Li_2CO_3;由此可以确定,辐照会导致固结,不利于氚的有效提取;结果证明,用燃烧法生产高纯度?-LiAlO_2不需要硝酸盐前驱体。     

空间的力量 新奥胡斯大学医院

正新奥胡斯大学医院是丹麦第一个超大型的医院案例,也是一个具有"康复医疗"概念的、超现代的国际先锋作品。医院的建筑设计通过系统运用"信息和循证"的工作方法,践行了"康复建筑"的综合理念。其"信息和循证"的方法是利用对现存建筑的研究和评估,以提供最有效的信息来创建最佳的康复建筑。从单人病房的设计、日光和光线的利用,以及景观和花园空间的设计,旨在尽量满足病人的需求,提升     

大型水电工程前期准备延期的影响类型分析

讨论了成本考虑不足与水电工程项目施工前准备阶段延期的负面影响,以及发展中国家不能及时有效地交付项目与稀有资源浪费间的冲突。建议项目员工、开发商、政府官员和国际金融机构重视延期成本,找到成本与效益的平衡点。     

A boronic acid-based fluorescent hydrogel for monosaccharide detection

A boronic acid-based anthracene fluorescent probe was functionalised with an acrylamide unit to incorporate into a hydrogel system for monosaccharide detection. In solution, the fluorescent probe displayed a strong fluorescence turn-on response upon exposure to fructose, and an expected trend in apparent binding constants, as judged by a fluorescence response where D-fructose>D-galactose>D-mannose>D-glucose. The hydrogel incorporating the boronic acid monomer demonstrated the ability to detect monosaccharides by fluorescence with the same overall trend as the monomer in solution with the addition of D-fructose resulting in a 10-fold enhancement (≤0.25 mol/L).