Diagnosis of faulty gears by modified AlexNet and improved grasshopper optimization algorithm (IGOA)

Journal of Mechanical Science and Technology - Gearbox is a significant part for the transmission of vehicles and various mechanical devices and is being utilized broadly in the industries despite...     

Structural and electrical properties of radio frequency magnetron sputtered tantalum oxide films: Influence of post-deposition annealing

The as-deposited and annealed radio frequency reactive magnetron sputtered tantalum oxide (Ta₂O₅) films were characterized by studying the chemical binding configuration, structural and electrical properties. X-ray photoelectron spectroscopy and X-ray diffraction analysis of the films elucidate that the film annealed at 673 K was stoichiometric with orthorhombic β-phase Ta₂O₅. The dielectric constant values of the tantalum oxide capacitors with the sandwich structure of Al/Ta₂O₅/Si were in the range from 14 to 26 depending on the post-deposition annealing temperature. The leakage current density was <20 nA cm^?2 at the gate bias voltage of 0.04 MV/cm for the annealed films. The electrical conduction mechanism observed in the films was Poole–Frenkel.     

Modulations in effective work function of platinum gate electrode in metal-oxide-semiconductor devices

Reduction in the accumulation capacitance value was more in Si metal-oxide-semiconductor devices than that of Ge metal-oxide-semiconductor devices after a thermal treatment irrespective of the annealing environment. Relatively, thermal treatment in oxygen environment improves the interface quality of HfO₂/Ge stacks considerably, when compared with HfO₂/Si stacks. Whereas, the forming gas annealing at a temperature of 400 °C was not so effective in improving the interface quality at HfO₂/Si stack. The presence of induced negatively charged hydrogen atom in Ge lessens the Fermi level pinning at HfO₂ and Ge interface.     

Studies on boundary lubrication properties of oxidised coconut and soy bean oils

Vegetable oils are a potential source of base oils for biodegradable lubricants, with limited oxidative stability. This study focuses on the effect of long‐term ageing and the influence of oxidation products on the boundary lubrication performance of coconut and soy bean oils, by subjecting them to accelerated ageing in a dark oven at elevated temperature. The samples were collected at regular intervals and analysed for the changes in viscosity, percentage of free fatty acid and peroxide number compared to fresh oil samples. The boundary lubrication properties of these samples were evaluated using a four‐ball tester. Increased wear observed with aged oil samples was linked to the destruction of triglyceride structure and formation of peroxides. The difference in the wear properties of soy bean oil to coconut oil was accounted by its high content of unsaturated fatty acids and its susceptibility to undergo oxidation. It was concluded that the coconut oil can perform as a better lubricant and has got a better storage life compared to soy bean oil. Copyright © 2009 John Wiley & Sons, Ltd.     

Co-simulation Based Finite State Machine for Telematic and Data Compression Microservices in IoT

Wireless Personal Communications - Despite the wide adoption of Internet of things (IoT) with several webs standards and cloud technologies; building of city wide IoT based smart city platform for...     

An Approach to End-to-End Audio Transmission Using Laser Communication

Wireless Personal Communications - Laser Communication is the most evolving arenas in the field of wireless communication. Presently, laser commutation is espoused in the satellite communication...     

Simultaneous plasticization and blending of isolate soy protein with poly[(butylene succinate)‐co‐adipate] by one‐step extrusion process

This article focuses on the preparation of isolated soy protein plasticized by a glycerol and water mixture/poly[(butylene succinate)‐co‐adipate] blends by an original single step extrusion process. Prepared blends were injection‐molded and characterized for their molecular interaction, morphology, rheological, thermal, dynamic mechanical, and mechanical properties. The comparison of these results with those obtained using a more regular two‐step compounding process validates the technical efficiency of this cost‐effective one‐step approach. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46442.     

FAIR: a hardware architecture for real-time 3-D image registration

Mutual information-based image registration, shown to be effective in registering a range of medical images, is a computationally expensive process, with a typical execution time on the order of minutes on a modern single-processor computer. Accelerated execution of this process promises to enhance efficiency and therefore promote routine use of image registration clinically. This paper presents details of a hardware architecture for real-time three-dimensional (3-D) image registration. Real-time performance can be achieved by setting up a network of processing units, each with three independent memory buses: one each for the two image memories and one for the mutual histogram memory. Memory access parallelization and pipelining, by design, allow each processing unit to be 25 times faster than a processor with the same bus speed, when calculating mutual information using partial volume interpolation. Our architecture provides superior per-processor performance at a lower cost compared to a parallel supercomputer.     

Linearity of summation of synaptic potentials underlying direction selectivity in simple cells of the cat visual cortex

Intracellular recordings from simple cells of the cat visual cortex were used to test linear models for the generation of selectivity for the direction of visual motion. Direction selectivity has been thought to arise in part from nonlinear processes, as suggested by previous experiments that were based on extracellular recordings of action potentials. In intracellular recordings, however, the fluctuations in membrane potential evoked by moving stimuli were accurately predicted by the linear summation of responses to stationary stimuli. Nonlinear mechanisms were not required.     

A twin unidirectional impulse turbine topology for OWC based wave energy plants

Experimental results from near shore bottom standing OWC based wave energy plants in Japan and India have now been available for about a decade. Historically the weakest link in the conversion efficiency of OWC based wave energy plants built so far has been the bidirectional turbine. This is possibly because a single turbine has been required to deliver power when the plant is exposed to random incident wave excitation varying by a factor of 10. A new topology that uses twin unidirectional turbines (which features a high efficiency spanning a broad range) is proposed. Using the Indian Wave Energy plant as a case study, it is shown that the power output from such a module considerably exceeds existing optimal configurations including those based on a fixed guide vane impulse turbine, linked guide vane impulse turbine or a Well's turbine. A wave to wire efficiency of the order of 50% over the incident range is shown to be feasible in a credible manner by showing the output at all stages of the conversion process. A frequency domain technique is used to compute the OWC efficiency and a time domain approach used for the power module with the turbine pressure being the pivotal variable.