A faster divide-and-conquer algorithm for constructing delaunay triangulations

An easily implemented modification to the divide-and-conquer algorithm for computing the Delaunay triangulation ofn sites in the plane is presented. The change reduces its (n logn) expected running time toO(n log logn) for a large class of distributions that includes the uniform distribution in the unit square. Experimental evidence presented demonstrates that the modified algorithm performs very well forn2¹⁶, the range of the experiments. It is conjectured that the average number of edges it creates—a good measure of its efficiency—is no more than twice optimal forn less than seven trillion. The improvement is shown to extend to the computation of the Delaunay triangulation in theL _p metric for 1<p.This research was supported by National Science Foundation Grants DCR-8352081 and DCR-8416190.     

管线用钢氢致裂纹(HIC)影响因素分析

研究了管线用钢的化学成分和金相组织对钢的氢致裂纹(HIC)性能的影响。研究认为,带状组织和马氏体含量对HIC性能有很大影响,S含量及Cep对HIC有不同程度影响。含有少量Cu、Ni的钢更适合在酸性环境下使用。     

浅析大型铸锻件质量体系

本文主要从质量体系的产生和发展、质量体系分析的资料、质量体系的环境分析及结构型式分析几个方面探讨分析了大型铸锻件的质量体系 ,可供大型铸锻件生产厂按 ISO90 0 0系列标准分析、设计、建立和完善大型铸锻件质量体系时参考。     

基于下垂控制模式的独立微电网小干扰稳定分析

从电力系统的运行原理出发,开展独立微电网系统运行稳定性研究对于促进分布式发电技术的发展具有重要意义。针对独立微电网系统运行稳定性问题,以李雅普若夫判据和特征值分析法为基础,对基于下垂控制模式的独立微电网系统的小扰动问题展开分析。首先,构建基于下垂控制模式的独立微电网系统数学建模,并基于线性化理论进行小扰动线性化分析,得到系统小扰动线性化状态矩阵;其次,基于李雅普若夫判据理论,对系统小扰动线性化状态矩阵的特征值进行分析,并逐一改变系统各个参数取值范围得到状态矩阵特征值变化的根轨迹;最后,基于状态矩阵特征值变化根轨迹确定系统各参数初步优化结果,并对比各参数优化前后的系统状态矩阵特征值分布情况,理论分析及实验验证表明初步优化后的系统运行可靠性增强。该研究成果可为微电网控制参数的优化选取提供思路和方法。     

STA同步热分析在硫铝酸盐水泥生产中的应用

采用STA同步热分析仪研究了铝矾土、水泥生料、石膏、水化水泥等在加热过程中的热效应及重量变化特征,以及水泥石膏结晶水受温度及加热方式对水泥性能影响,水泥水化为水泥石过程中氢氧化钙的形成及分解机理。进而为指导工业生产硫铝酸盐水泥生料配料,回转窑煅烧工艺参数控制等提供理论依据。     

00Crl8Nil0N奥氏体不锈钢200 - 600℃高温疲劳性能的研究

试验用00Cr18Ni10N钢（/%:0.018C,0.41Si,1.68Mn,18.18Cr,10.38Ni,0.16N）经1t EAF-AOD-ESR冶炼,锻成Φ30 mm材和1 050℃固溶处理,进行了00Cr18Ni10N钢200～600℃光滑（K_t=1）、缺口（K_t=3）的轴向高周疲劳性能研究,绘制了疲劳S-N曲线、计算了疲劳极限,并对疲劳试样的典型断口进行了SEM观察。结果表明,光滑试样的疲劳极限随试验温度升高而降低,缺口试样的疲劳极限对试验温度变化不敏感。当应力集中系数由K_t=1提高到K_t=3时,00Cr18Ni10N钢的200、400、600℃下10⁷周次条件疲劳极限分别从530、506、410 MPa,降低到323、370、392 MPa。表明在高温下00Cr18Ni10N钢存在疲劳极限对应力集中敏感,且应力集中敏感性随着试验温度的升高而降低。疲劳试样的断口形貌由疲劳源区、疲劳裂纹扩展区和瞬断区组成,疲劳起源于表面加工刀痕的不连续位置,呈韧性断裂特征。     

我国冶金分析定量检测仪器的发展趋势

为了了解我国分析仪器的发展,推动冶金分析领域定量检测技术的进步,文章以北京分析测试学术报告会暨展览会(BCEIA)在国内的展示成果为依托,选择电感耦合等离子体发射光谱(ICP-OES)、电感耦合等离子体质谱(ICP-MS)、X射线荧光光谱(XRF)、激光诱导击穿光谱(LIBS)等基础定量检测仪器为主要分析对象,归纳总结了这些仪器的发展过程、基本原理和主要结构。从分析检测人员的视角,讨论了该检测仪器的优势特点及应用效果;展望了定量分析检测技术的发展趋势;提出了以定量检测仪器为基础的新型高端科学仪器的发展前景。又以激光剥蚀电感耦合等离子体质谱(LA-ICP-MS)、辉光放电质谱(GD-MS)、电子探针X射线显微分析仪(EPMA)等拓展联用检测仪器为例,介绍了设备的主要特点及应用,最终总结出LA-ICP-MS为固体样品中微量元素分析的常用技术,GD-MS技术是痕量元素分析的重要手段,EPMA技术因具有与其他仪器结合包容性高的优点,虽然在使用过程中存在一定的缺陷,但已成为通用的分析手段。而我国定量分析检测技术正朝着现场化、专用化及标准化的方向发展。     

数控机床光栅尺部分故障实例分析

本文通过数控机床的故障实例，分析了光栅故障现象及原因和解决的办法。     

Thermal Analysis of Grinding

Thermal damage is one of the main limitations of the grinding process, so it is important to understand the factors which affect grinding temperatures. This paper presents an overview of analytical methods to calculate grinding temperatures and their effect on thermal damage. The general analytical approach consists of modeling the grinding zone as a heat source which moves along the workpiece surface. A critical factor for calculating grinding temperatures is the energy partition, which is the fraction of the grinding energy transported as heat to the workpiece at the grinding zone. For shallow cut grinding with conventional abrasive wheels, the energy partition is typically 60%-85%. However for creep-feed grinding with slow workspeeds and large depths of cut, the energy partition is only about 5%. Such low energy partitions are attributed to cooling by the fluid at the grinding zone. Heat conduction to the grains can also reduce the energy partition especially with CBN abrasives which have high thermal conductivity. For High Efficiency Deep Grinding (HEDG) using CBN wheels with large depths of cut and fast workspeeds, preheated material ahead of the grinding zone is removed together with the chips, thereby lowering the temperature on the finished surface. Analytical models have been developed which take all of these effects into account. Much more research is needed to better understand and quantify how grinding temperatures affect the surface integrity of the finished workpiece.     

热型连铸过程的一维稳态传热模型

根据热型连铸技术原理，建立了热型连铸凝固过程一维稳态温度场的物理、数学模型。通过数值计算，得出了铸型出口温度、冷却距离、拉铸速度和喷水冷却强度等工艺参数对铸坯固液界面位置的影响。计算结果与试验结果吻合。