On-Site Fabrication of Crystalline Cerium Oxide Films and Patterns by Ink-Jet Deposition Method at Moderate Temperatures

Crystalline CeO₂ films and patterns have been successfully fabricated in a "single-step process" at moderate temperature. In this process, the combination of the ink-jet technique and depositing the precursor on a hot substrate (≤300°C) gave crystalline CeO₂ without further heat treatment. X-ray diffraction analysis revealed that the phase formed was crystallized ceria with nanosized (<10 nm) crystallites. The film thickness was several hundred nanometers and the pattern width was about 150 μm. Scanning electron microscopy analysis showed that the films and patterns were free of cracks and adhered to the substrate. This is the first report about the direct patterning of crystalline CeO₂ without postfiring or posttreatments like masking, etching, etc.     

The effect of silicon on the adhesion of noble metals

The effect of silicon on the adhesion of noble metals has been studied using a twist-compression bonding test and an ultrahigh vacuum test. The specimen surfaces were analysed using ion microprobe mass analysis and electron spectroscopy for chemical analysis. It was found that silicon, whether introduced on the surface as an impurity or present as an alloy component, was effective in preventing adhesion in air because of the formation of silicon oxide. The oxidation rate of silicon and metal-silicon alloy systems is qualitatively discussed considering changes in adhesion coefficient and contact resistance.Twist-compression bonding tests of noble-metal alloys containing an active additive such as silicon were found to be affected by the surrounding atmosphere.     

Orientation of nanowires consisting of poly(3-hexylthiophene) using strong magnetic field

Nanowires consisting of regioregular poly(3-hexylthiophene) (P3HT) as a conducting polymer were prepared using p-xylene. Magnetic processing of the nanowires was carried out using two superconducting magnets with horizontal (B_max = 8 T) and vertical (B_max = 10 T) directions. The formation of the nanowires was confirmed by atomic force microscopy (AFM) measurement. The results from the AFM images and the polarized absorption spectra on glass plates indicated that the nanowires partly oriented themselves with their long axes, which are parallel to the π–π stacking direction, being perpendicular to the magnetic field. The magnetic orientation is most likely ascribed to anisotropy in the magnetic susceptibilities of the ordered P3HT in the nanowires.     

Construction and field measurement of high-speed railway test embankment built on Indian expansive soil “Black Cotton Soil”

The railway embankment applied to high-speed railways is required to have high performance in terms of strength and deformation characteristics. Especially in the case of railway embankments that support slab tracks, the allowable settlement is very small. There are two technical challenges in constructing high-speed rail embankments to support slab tracks in India. The first challenge is dealing with problematic black cotton soil (BCS), which is widely distributed in India but very unusual soil in Japan. The second challenge is posed by the strict deformation requirement in the construction of the embankments. In this study, a 6 m-high test embankment was constructed on BCS in India. The deformation of the embankment and changes in water content were measured over a period of 18 months. In the construction of the test embankment, two different BCS countermeasures were applied. The results of the tests on this embankment were compared with those from an embankment without countermeasures. Complicated deformation behaviors, including settlement and the uplift of embankment, were observed in the section without countermeasure. However, in the embankment with cement-mixed gravelly soil (CGS) slab improvement with geosynthetics, the much lower amplitude of embankment deformation is evidence of the effectiveness of this countermeasure. The cohesive non-swelling soil (CNS) layer applied immediately below the embankment to reduce the water content fluctuation of BCS was not effective enough for use for high-speed railway embankment. Besides determining the technical challenges for the BCS countermeasures, the results of this study confirmed that a high-performance embankment can be constructed with Indian embankment material by performing sufficient compaction management.     

Hydrostatic Pressure Influences HIF-2 Alpha Expression in Chondrocytes

Hypoxia-inducible factor (HIF)-2α is considered to play a major role in the progression of osteoarthritis. Recently, it was reported that pressure amplitude influences HIF-2α expression in murine endothelial cells. We examined whether hydrostatic pressure is involved in expression of HIF-2α in articular chondrocytes. Chondrocytes were cultured and stimulated by inflammation or hydrostatic pressure of 0, 5, 10, or 50 MPa. After stimulation, heat shock protein (HSP) 70, HIF-2α, nuclear factor kappa B (NF-κB), matrix metalloproteinase (MMP)-13, MMP-3, and vascular endothelial growth factor (VEGF) gene expression were evaluated. The levels of all gene expression were increased by inflammatory stress. When chondrocytes were exposed to a hydrostatic pressure of 5 MPa, HIF-2α, MMP-13, and MMP-3 gene expression increased significantly although those of HSP70 and NF-κB were not significantly different from the control group. In contrast, HIF-2α gene expression did not increase under a hydrostatic pressure of 50 MPa although HSP70 and NF-κB expression increased significantly compared to control. We considered that hydrostatic pressure of 5 MPa could regulate HIF-2α independent of NF-κB, because the level of HIF-2α gene expression increased significantly without upregulation of NF-κB expression at 5 MPa. Hydrostatic pressure may influence cartilage degeneration, inducing MMP-13 and MMP-3 expression through HIF-2α.     

Real‐time histological imaging of kidneys stained with food dyes using multiphoton microscopy

We have developed a real‐time imaging technique for diagnosis of kidney diseases which is composed of two steps, staining renal cells safely with food dyes and optical sectioning of living renal tissue to obtain histological images by multiphoton microscopy (MPM). Here, we demonstrated that the MPM imaging with food dyes, including erythrosine and indigo carmine, could be used as fluorescent agents to visualize renal functions and structures such as glomerular bloodstreams, glomerular filtration, and morphology of glomeruli and renal tubules. We also showed that the kidneys of IgA nephropathy model‐mice stained with the food dyes presented histopathological characteristics different from those observed in normal kidneys. The use of the food dyes enhances the quality of tissue images obtained by MPM and offers the potential to contribute to a clinical real‐time diagnosis of kidney diseases. Microsc. Res. Tech. 78:847–858, 2015. © 2015 Wiley Periodicals, Inc.     

采用无偏振片反射式LCD及超低功耗驱动技术制造移动显示器件

我们通过对材料和制备条件的精细化处理,生产出一种在低刷新频率下无闪烁和图像迟滞现象的反射式显示器。该显示器的功耗非常低,且可在宽温度范围内工作,是未来移动显示器件的潜力平台。     

Purification and characterization of a protease from Pseudomonas aeruginosa grown in cutting oil

The Pseudomonas aeruginosa san-ai strain was isolated from water-soluble cutting oil used for cooling and lubrication during industrial metal-working processes. This strain, which is grown in a high alkaline (pH 10) mixture of surfactants and mineral oil, produces an extracellular proteolytic enzyme. We have purified and characterized this 18 kDa protease. The P. aeruginosa san-ai protease functions optimally at pH 9.0 and 60 degrees C. Additionally, it is a Zn-containing metalloenzyme, and its monomeric structure contains at least one disulfide bond. Because the enzyme is stable in the presence of organic solvents, it is suitable for peptide synthesis. Furthermore, the P. aeruginosa san-ai protease could be used in an intelligent drug delivery system (DDS) designed for applications in the metal industry for prevention of putrefaction of cutting oil.     

Constant-gap spectrometer design for the electron/ion collider ELISe

For the study of electron-scattering off radioactive nuclei, the ELISe spectrometer will be constructed as a part of the Facility of Antiprotons and Ion Research (FAIR) in Darmstadt. A conceptional design of a spectrometer with a “clam-shell” gap was presented before. Here, we will present an improved design with a pre-deflector with a constant gap. Such a pre-deflector is not only simpler to construct but also provides larger angle acceptances in the forward-angle range compared to those with the “clam-shell” design.