Location Privacy in Device-Dependent Location-Based Services: Challenges and Solution

With the evolution of location-based services (LBS), a new type of LBS has already gain a lot of attention and implementation, we name this kind of LBS as the Device-Dependent LBS (DLBS). In DLBS, the service provider (SP) will not only send the information according to the user’s location, more significant, he also provides a service device which will be carried by the user. DLBS has been successfully practised in some of the large cities around the world, for example, the shared bicycle in Beijing and London. In this paper, we, for the first time, blow the whistle of the new location privacy challenges caused by DLBS, since the service device is enabled to perform the localization without the permission of the user. To conquer these threats, we design a service architecture along with a credit system between DLBS provider and the user. The credit system tie together the DLBS device usability with the curious behaviour upon user’s location privacy, DLBS provider has to sacrifice their revenue in order to gain extra location information of their device. We make the simulation of our proposed scheme and the result convince its effectiveness.     

准噶尔盆地吉木萨尔凹陷陆相页岩油地质特征与聚集机理

综合利用岩心、测井、烃源岩热解、铸体薄片、场发射扫描电镜、激光共聚焦显微镜与高压压汞等分析测试的结果，对准噶尔盆地吉木萨尔凹陷芦草沟组陆相页岩油地质特征与聚集机理进行了研究。结果表明：吉木萨尔凹陷咸化湖盆型沉积地层富含有机质，是烃源岩层也是储层，页岩油藏具有“源储一体”的地质特征，存在粉砂岩类与泥岩类和白云岩类与泥岩类两类岩性组合类型。芦草沟组大面积整体含油、“甜点”富集且原油成熟度较低。页岩油赋存岩石的润湿性为亲油性，生烃增压是页岩油运聚的主要动力。微纳米孔喉、层理缝与构造裂缝形成页岩油的有利储集空间与渗流通道。页岩油整体为源内或近源聚集，并以游离态和吸附态赋存于芦草沟组“甜点”段与泥页岩层段中。     

CO2注入井封隔器早期密封失效机制研究

为了揭示CO_2注入井中性能优良的氢化丁腈橡胶封隔器早期密封失效的机制,根据失效井的特征分析以及CO_2的相态特点,提出实现恒定泄压速度的室内实验方法,并对不同CO_2泄压速度下橡胶表面进行形貌观测和力学性能测试分析。结果表明:随着泄压速度的增加,橡胶表面出现了小气泡、大气泡甚至气泡破裂等龟裂现象,橡胶的密封性能均明显变差;注气井突然泄压时,橡胶内部的气体在短时间内无法渗出,其在内外压差作用下会膨胀形成气泡甚至爆裂,这是造成CO_2注入井封隔器早期密封失效的主要原因。为了防止封隔器的早期密封失效,推荐现场井口泄压速度控制在5 MPa/h以内。     

Research on slag-resistance of ZrN-SiAlON-SiC-C composite refractory in different atmospheres

The ZrN-SiAlON composite powder was synthesized using low-grade zircon and bauxite by carbothermal reduction nitridation at first and then ZrN-SiAlON-SiC-C composite refractory were fabricated with the ZrN-SiAlON powder, SiC particles, and a small amount of Si powder as raw materials and sucrose as the binder. The slag resistance of these composites in O₂, N₂ and Ar atmosphere was investigated by X-ray diffraction, scanning electron microscopy, and energy dispersion spectra. The results show that the pores in the inside of ZrN-SiAlON-SiC-C composite refractory were enlarged in oxygen atmosphere due to oxidation, which leads to the decrease in slag resistance. In argon atmosphere, blast furnace slag destroyed the sintered body of zircon, corundum, and cristobalite with the formation of CaZrO₃, then infiltrated into and filled the pores inside the refractory to form a dense layer, which hindered the further erosion of the blast furnace slag. In the reducing atmosphere, the interfacial energy of the gas-liquid phases became larger due to the reactions between blast furnace slag liquid and the gas, resulting in a larger wetting angle which prevented the erosion.     

在轨维修后端模块接口机构的研究

在轨维修可以大大的延长空间科学仪器的使用寿命,节省大量的经济成本。为了实现空间望远镜后端模块的在轨操作和更换,设计了一套与之对应的接口机构,能够解决在轨快速定位与安装。根据321运动学定位准则,详细介绍了该接口机构的内部组成和工作原理;然后把该接口机构与后端模块进行组件级有限元仿真,仿真结果表明一阶模态远高于整机基频可以有效地避免发射时候的共振;设计了一套平面内的工装来模拟后端模块,利用等效质量法对整个机构进行重力卸载;搭建实验平台,利用激光跟踪仪来测量整个后端模块的重复定位安装精度,实验数据表明,X,Y,Z 3个方向的重复平移定位误差分别为±5.58μm,±3.24μm及±3.63μm,优于总体指标±10μm;热实验结果表明整个机构可以完全释放由于温度变化产生的形变,具有很高的热稳定性;使入射光线和靶面的相对位置持续稳定,保证了较高的成像质量。为其他空间在轨维护装置提供强有力的参考价值。     

Ultrafine porous boron nitride nanofiber-toughened WC composites

Porous fibers are widely used in catalysis chemistry and hydrogen storage but are rarely used in structural ceramics. In this study, spark plasma sintering was used to prepare an ultrafine porous boron nitride nanofiber-toughened WC composite for the first time. The obtained WC-0.05 wt% ultrafine porous boron nitride nanofiber composites exhibited better properties (ie, a 2.3% increase in hardness and a 19.6% increase in fracture toughness) compared to those of the pure WC specimen. The fiber porosity improved the second phase-WC matrix microstructural combination. The described approach is a novel preparation method for the WC composites. Furthermore, a new toughening mechanism, which is based on “pinning and stretching”, was determined. These findings suggest that porous boron nitride fibers can be considered to be second phases for toughening the WC composites.     

单自由度八杆仿生机构构型与尺度同步设计方法

单自由度八杆仿生机构杆长参数较多，是仿生机器人领域研究的难点之一。为提高设计效率，提出一种构型与尺度同步设计方法。在选定的运动链和机架的基础上，以不等式形式分步给出运动可行性及外形约束条件，使得上一步的杆长可作为下一步求解的已知值。通过该过程，在得到八杆仿生机构构型的同时，快速得到所有杆长的初步可行域。循环上述过程，逐步缩小约束条件的范围，可使得八杆机构的杆长快速接近目标值。在此基础上，分类讨论了连杆搭接顺序、约束条件及基本运动链的差异对求解难度及构型结果的影响。利用所提出的单自由度八杆仿生机构的设计方法，在对初始条件进行合理选取的前提下，可在初步得到构型的同时将杆长限定在较小范围内，实现了构型与尺度的同步设计。该方法还可应用于其他单自由度机构的设计当中，具有较好的借鉴意义。     

Mechanism of methanol decomposition on the Pd/WC(0001) surface unveiled by first-principles calculations

In this study, the decomposition of methanol into the CO and H species on the Pd/tungsten carbide (WC)(0001) surface is systematically investigated using periodic density functional theory (DFT) calculations. The possible reaction pathways and intermediates are determined. The results reveal that saturated molecules, i.e., methanol and formaldehyde, adsorb weakly on the Pd/ WC(0001) surface. Both CO and H prefer three-fold sites, with adsorption energies of −1.51 and −2.67 eV, respectively. On the other hand, CH₃O stably binds at three-fold and bridge sites, with an adsorption energy of −2.58 eV. However, most of the other intermediates tend to adsorb to the surface with the carbon and oxygen atoms in their sp³ and hydroxyl-like configurations, respectively. Hence, the C atom of CH₂OH preferentially attaches to the top sites, CHOH and CH₂O adsorb at the bridge sites, while COH and CHO occupy the three-fold sites. The DFT calculations indicate that the rupture of the initial C–H bond promotes the decomposition of CH₃OH and CH₂OH, whereas in the case of CHOH, O–H bond scission is favored over the C–H bond rupture. Thus, the most probable methanol decomposition pathway on the Pd/WC(0001) surface is CH₃OH → CH₂OH → trans-CHOH → CHO → CO. The present study demonstrates that the synergistic effect of WC (as carrier) and Pd (as catalyst) alters the CH₃OH decomposition pathway and reduces the noble metal utilization.