Comparison of total ozone column observations from space-borne Ozone Monitoring Instrument with ground-based Dobson Ozone Spectrophotometer measurements at an urban location in Indo-Gangetic Basin

This article presents a comparison analysis of OMIT (Ozone Monitoring Instrument retrieved overpass total ozone column (TOC)), and DOST (Dobson Ozone Spectrophotometer observed TOC) over Delhi during a period from October 2004 to June 2011. Megacity Delhi, located in Indo-Gangetic Basin, is an important site for comparison of ground-based and satellite retrieved TOCs due to significant anthropogenic emissions of ozone precursors, large shift in seasons, and large-scale crop residue burning in the region. DOST and OMIT data show an overall bias of 3.07% and significant correlation with coefficient of determination R² = 0.73. Large seasonal fluctuations in the biases and correlations have been observed ranging from 2.46% (winter) to 3.82% (spring), and R² = 0.84 (winter) to R² = 0.09 (summer), respectively. The large biases are attributed to changes in temperature, cloud cover, pollutants emissions from urban area, and crop-residue burning events. We also find notable variations in correlations between the datasets due to the varying burden of absorbing aerosols from open field crop-residue burning. The R² has changed from 0.67 (for aerosol optical depth, AOD 1.5–3.5) to 0.77 (for AOD 0–0.99). The dependence of the bias on solar zenith angle, cloud fraction, and satellite distance is also discussed. A simple linear regression analysis is applied to check the linkage between DOST and OMIT. The influence of atmospheric air temperature and relative humidity on OMIT at different pressure levels between 1000 and 20 hPa has been discussed.     

Controlling the material removal and roughness of Inconel 718 in laser machining

Nickel alloys including Inconel 718 are considered as challenging materials for machining. Laser beam machining could be a promising choice to deal with such materials for simple to complex machining features. The machining accuracy is mainly dependent on the rate of material removal per laser scan. Because of the involvement of many laser parameters and complexity of the machining mechanism it is not always simple to achieve machining with desired accuracy. Actual machining depth extremely varies from very low to aggressively high values with reference to the designed depth. Thus, a research is needed to be carried out to control the process parameters to get actual material removal rate (MRR_act) equals to the theoretical material removal rate (MRR_th) with minimum surface roughness (SR) of the machined surfaces. In this study, five important laser parameters have been used to investigate their effects on MRR and SR. Statistical analysis are performed to identify the significant parameters with their strength of effects. Mathematical models have been developed and validated to predict the machining responses. Optimal set of laser parameters have also been proposed and confirmed to achieve the actual MRR close to the designed MRR (MRR_% = 100.1%) with minimum surface roughness (R_a = 2.67 µm).     

Inhibition of FLT3: A Prototype for Molecular Targeted Therapy in Acute Myeloid Leukemia

Modern therapy of acute myeloid leukemia (AML) began in 1973 with the first report of the successful combination of daunorubicin and cytarabine, which led to complete remission in approximately 45% of patients. Accurate AML diagnosis was dependent on morphology, aided initially only by cytochemistry. Unlike acute lymphoblastic leukemia (ALL), immunophenotyping offered little in the diagnosis of AML, at least during the 1970s and 1980s. The advent of reliable cytogenetics changed the entire prognostic outlook of AML. With karyotypic analysis, different groups of AML could be classified and stratified for various therapies. Unique mutational profiling was a major advance in further categorizing AML patients, aided by the immunophenotypic identification of antigenic markers on the cells. All these advances were occurring as the understanding of the importance of the tumor burden—known as minimal residual disease (MRD)—became crucial for the management of AML patients. The efficacy of MRD has rapidly progressed in the past decade, from a specificity of 10⁻³ with immunophenotyping to 10⁻⁴ with polymerase chain reaction (PCR), which is only appropriate for some patients with AML, and finally to 10⁻⁵ or even 10⁻⁶ cells with the extraordinary sensitivity of next-generation sequencing (NGS). All of these advances have promoted the concept of personalized medicine, which has led to the advent of targeted agents that can accurately be used for specific diagnostic subtypes. Responses can be predicted and measured accurately. Such targeted agents have now become a cornerstone in the management of AML, increasing efficacy and dramatically reducing toxicity. The focus of this review is on one of the most well-studied targeted agents in AML: the FMS-like tyrosine kinase 3 (FLT3) inhibitors, which have impacted the prognostication and therapeutics of AML. This review selectively discusses the FLT3 inhibitors in detail, as a model for the other burgeoning targeted agents that have already been approved, as well as those that are currently in development.     

Comparative photocatalytic performance and therapeutic applications of zinc oxide (ZnO) and neodymium-doped zinc oxide (Nd–ZnO) nanocatalysts against Acid Yellow-3 dye: kinetic and thermodynamic study of the reaction and effect of various parameters

Zinc oxide (ZnO) nanoparticles (NPs) were synthesized hydrothermally and doped with 4% Neodymium (Nd). The produced NPs were characterized using UV–Vis spectroscopy, X-ray diffraction (XRD), Energy dispersive X-ray analysis, Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA) and Photoluminescence (PL) spectroscopy. With the addition of 4% Nd, the bandgap reduced from 3.20 to 3.00 eV which confirmed successful doping with Nd which also evident from FTIR study. The XRD study showed hexagonal structure of the synthesized material, while SEM study confirmed that Nd-doped ZnO (Nd–ZnO) NPs are well dispersed as compare to ZnO. TGA study revealed that synthesized NPs were much stable to temperature and only 11.3% and 7.2% the total loss occurred during heating range (40–600 °C) in case of ZnO and Nd–ZnO NPs, respectively. The PL intensity of the visible peaks of ZnO reduced after doping with Nd. The degradation of Acid yellow-3 over both the catalysts followed first-order kinetics. The activation energy calculated for the photodegradation reaction was 43.8 and 33.7 kJ/mol using pure ZnO and Nd–ZnO NPs, respectively. About 91% and 80% dye was degraded at the time interval of 160 min using Nd–ZnO and ZnO NPs, respectively. High percent degradation of dye was found at low concentration (10 ppm) and at optimal dosage (0.035 g) of the catalyst. The rate of Acid yellow-3 dye degradation was found to increase with increase in temperature (up to 50 °C) and pH(8) of the medium. The recyclability study showed that both pure ZnO and Nd–ZnO NPs could be reused for the degradation of the given dye. With the addition of H₂O₂ up to 5 µL, the rate of reaction increased clearly indicating the effect of OH^· generation during photocatalysis. When compared with Nd–ZnO NPs at low concentrations, ZnO NPs at higher concentrations were found to be less hazardous. Both the NPs showed best antibacterial activities against Staphylococcus aureus. The hemolytic study indicated that at low concentration, pure ZnO was non-hemolytic as compared to Nd–ZnO.

     

Towards Ensuring Reliability of Vehicular Ad Hoc Networks Using a Relay Selection Techniques and D2D Communications in 5G Networks

Wireless Personal Communications - Benefiting from unlimited power supply, vehicular ad hoc networks (VANETs), in a 5G platform, can deal superiorly with the challenges of providing high...     

A solar still augmented with a flat-plate collector

A single-stage, basin-type solar still and a conventional flat-plate collector were connected together in order to studythe effect of augmentation on the still under local conditions. The still inlet was connected to a locally made, fin-tube collector such that its outlet was fed to the still basin instead of the common storage tank. Measurements of various temperatures, solar intensities and distilled water productions were taken for several days at various operating conditions. Several modes of operation were studied: still connected to collector for a 24-h period; still connected only during sunlight hours from 8 am to 5 pm, and still operating alone for a 24-h period. These tests were performed using tap water and saline water as a feed. It was found that the mass of distilled water production using augmentation was increased by 231% in the case of tap water as a feed and by 52% in the case of salt water as a feed.     

Temperature variation in high slump drilled shaft concrete and its effect on slump loss

Drilled shaft refers to a deep foundation system where a single large diameter pier is used to replace a whole group of piles. High slump self-compacting concrete is used in drilled shafts due to its high fluidity and less proneness to segregation. The Florida Department of Transportation (FDOT) specifications require that such concrete should have a slump between 7 and 9 in. when placed and should maintain a slump of 4 in. or more throughout the concrete placement time. Furthermore, the mix for the slump loss test should be prepared at a temperature consistent with the highest ambient or initial concrete temperature (whichever is greater) expected during actual concrete placement. It is possible that the temperature of concrete inside the drilled shaft is lower than the ambient or initial concrete temperature due to the presence of ground water. If that is the case, slump loss would be less than the loss determined at the highest ambient or the initial concrete temperature, making the FDOT requirement unrealistic. However, it should be experimentally verified. This experimental study was conducted with the objective to establish profiles of concrete temperature in time from placement to hardening along depth as well as across width of the drilled shaft. Based on the gathered data, it was found that no significant temperature differential existed along the depth and across the width of the drilled shaft during the initial setting of concrete. The temperature of concrete inside the drilled shaft was same as initial concrete temperature before placement at all locations. This finding leads to the conclusion that concrete temperature inside drilled shaft is not affected by ambient temperature and/or the underground temperature conditions.     

Electromechanical properties of ternary BiFeO<Subscript>3</Subscript>−0.35BaTiO<Subscript>3</Subscript>–BiGaO<Subscript>3</Subscript> piezoelectric ceramics

In the present work, composition dependent crystal structure, ferroelectric, piezoelectric, and temperature dependent dielectric properties of the BiGaO₃-modified (1–x)(0.65Bi_1.05FeO₃–0.35BaTiO₃) (BFBT35–xBG, where x?=?0.00–0.03) lead-free ceramics were systematically investigated by solid-state reaction method, followed by water quenching process. The substitution of BG successfully diffuses into the lattice of the BFBT ceramics, without changing the pseudo-cubic structure of the samples. The scanning electron microscopy (SEM) results revealed that the average grain size was increased with BG-content in BFBT system. The BFBT–xBG ceramics showed a maximum in permittivity (?_max) at temperatures (T_max) above 500 °C in the compositional range of 0.00?≤?x?≤?0.03. The electro-strain is measured to be 0.125% (d^*₃₃ ~ 250 pm/V) under unipolar fields (5 kV/mm) for BFBT–0.01BG ceramics. The same composition (x?=?0.01), large static piezoelectric constant (d₃₃ ~ 165 pC/N) and electromechanical coupling factor (k_p ~ 25%) were obtained. The above investigated characterizations suggests that BFBT–BG material is favorable for piezoelectric and high temperature applications.     

Ultrastructural features of bone marrow cells from patients with acquired sideroblastic anemia

The ultrastructural findings of the bone marrow cells from 15 patients with acquired sideroblastic anemia are presented. The red cell precursors from all patients showed the presence of electron-dense material in the mitochondria, representing most probably iron deposits. A great number of these mitochondria were completely destroyed. The erythropoietic precursors from one of the patients showed markedly elongated mitochondria that measured up to 3 microm. In addition numerous cytoplasmic vacuoles were observed. The red cell precursors from 60% of the patients showed signs of dyserythropoiesis, such as incomplete nuclear division and nuclear distortion. The polymorphonuclears from 47% of the patients presented nuclear abnormalities expressed as nuclear bridges, appendices, and blebs. In addition, phagocytosis of red blood cells was observed. The results of the study underline the advantages of the transmission electron microscope examination in visualization of intricate alterations in hematopoietic cells that cannot be detected with a light microscope.     

Mannose based polymeric nanoparticles for lectin separation

The aim of this work is to synthesize the original, new polymeric nanoparticles for concanavalin A (Con A) purification. Nanoparticles were synthesized by surfactant free emulsion polymerization. In the polymerization prosedure, 1-O-(2′-hydroxy-3′-acryloyloxypropyl)-2,3:5,6-di-O-isopropylidene-α-D-mannofuranose (Man-OPA) was used as co-monomer and 2-hydroxyethylmethacrylate (HEMA) was used as a monomer. Man-OPA was characterized by Fourier Transform Infrared Spectroscopy (FTIR), nuclear magnetic resonance and elemental analysis techniques. Poly(HEMA-Man-OPA) nanoparticles were characterized by scanning electron microscopy, FTIR and Zeta Sizer. In adsorption?desorption experiments, maximum Con A adsorption capacity of poly(HEMA-Man-OPA) nanoparticles was found 630.6 mg/g nanoparticle (pH 7.5, 1.0 mg/mL). Adsorption?desorption experiments were repeated in four times. According to results, these nanoparticles could be used several times without significant decrease in Con A adsorption capacity.