Rate and Computational Studies for Pd-NHC-Catalyzed Amination with Primary Alkylamines and Secondary Anilines: Rationalizing Selectivity for Monoarylation versus Diarylation with NHC Ligands

The relative rates of arylation of primary alkylamines with different Pd-NHC catalysts have been measured, as have the relative rates of arylation of the secondary aniline product in an attempt to understand the key ligand design features necessary to have high selectivity for the monoarylated amine product. As the substituents on the N-aryl ring of the NHC increase in size, selectivity for monoarylation increases and this is further enhanced by chlorinating the back of the NHC ring. Computations have been performed on the catalytic cycle of this transformation in order to understand the selectivity obtained with the different catalysts.     

Superbase‐catalyzed domino 3H‐pyrroles synthesis from ketoximes and acetylene: DFT study vs experiment

Elimination of vinyl alcohol from 5‐vinyloxypyrrolines in the presence of superbases (final step of domino 3H‐pyrroles synthesis from ketoximes and acetylene) is studied computationally at different levels of theory in DMSO solution (PCM). The sequences of transformations starting from nucleophilic addition of hydroxide ion to carbon‐carbon or carbon‐nitrogen double bonds are proposed as possible mechanisms. Unusual reactivity of 2,5‐dimethylphenyl substituted 5‐vinyloxypyrroline is explained within these mechanisms.     

Development and validation of an LC/MS/MS method for simultaneous determination of shionone and epi‐friedelinol in rat plasma for pharmacokinetic study after oral administration of Aster tataricus extract

A rapid and sensitive liquid chromatography tandem mass spectrometry (LC/MS/MS) method was developed and validated using spinasterol as the internal standard (IS) for the simultaneous determination of shionone and epi‐friedelinol in rat plasma. Plasma samples were pretreated using liquid–liquid extraction with ethyl ether. Chromatographic separation was achieved on a C₁₈ column (100 × 2.1 mm, 5 μm) with an isocratic elution consisting of acetonitrile–0.1% formic acid water (75:25, v/v) at a flow rate of 0.30 mL/min. Detection was performed under the selected reaction monitoring scan using an electrospray ionization in the positive ion mode. The mass transitions were as follows: m/z 427.4 → 95.1 for shionone, m/z 411.4 → 205.2 for epi‐friedelinol and m/z 395.3 → 105.2 for IS. All calibration curves exhibited good linearity (r > 0.995) over the concentration range for both components. The intra‐ and inter‐day precisions at three QC and lower limit of quantitation levels were both <10.21% in terms of relative standard deviation, and the accuracy ranged from ?7.13 to 8.02% in terms of relative error. The extraction recoveries of the compounds ranged from 82.07 to 89.81%. The developed method was successfully applied to the pharmacokinetic study of shionone and epi‐friedelinol after oral administration of Aster tataricus extract to rats. Copyright © 2015 John Wiley & Sons, Ltd.     

A simple LC‐MS method for determination of cyasterone in rat plasma: application to a pilot pharmacokinetic study

A simple, specific, and sensitive liquid chromatography–mass spectrometry (LC‐MS) method for determination of cyasterone in rat plasma was developed in our laboratory. Cucurbitacin B was used as an internal standard (IS). After protein precipitation with twofold volume of acetonitrile, the analyte and IS were separated on a Luna C₁₈ column (100 × 4.6 mm, i.d., 3.0 µm; Phenomenex) by isocratic elution with acetonitrile–water (80:20, v/v) as the mobile phase at a flow rate of 0.4 mL/min. An electrospray ionization source was applied and operated in the positive ion mode; selected ion monitoring scan mode was used for quantification, and the target ions m/z 543.3 for cyasterone and m/z 581.3 for IS were chosen. Good linearity was observed in the concentration range of 0.40–400 ng/mL for cyasterone in rat plasma. Intra‐day and inter‐day precision were both <7.4%. This method was proved to be suitable for pharmacokinetic studies after oral (5.0 mg/kg) or intravenous (0.5 mg/kg) administration of cyasterone in rats. Copyright © 2015 John Wiley & Sons, Ltd.     

Importance of verifying queue model assumptions before planning with simulation software

This case study uses empirical data gathered at an Australian refinery to verify the assumptions for queue distributions before using special-purpose software to plan the off-road-truck hauling of titanium dioxide to a refinery (n = 773). Easy-to-use spreadsheet software is utilized to verify assumptions for queue models. Managers are able to make decisions based on economic implications of queue models to avoid making costly planning mistakes. Analysts can use nonparametric hypothesis-testing techniques to verify distribution assumptions for optimization without having to write hard-to-maintain and complex algebraic linear equations or nonlinear search routines.     

The Triplet State in Pyrene

Both emission and excitation spectra of phosphorescence and delayed fluorescence of pyrene single crystals have been investigated between 2 K and 300 K using cw dye laser excitation. The experiments prove that the lowest triplet state is excitonic in nature in the high and low temperature crystalline phases. No evidence for triplet excimer emission could be found. The so-called regular broad band triplet excimer emission was spectrally resolved at low temperature and identified as trap emission. On the basis of polarized high resolution excitation spectra of undoped normal and perdeuterated pyrene (supplemented by Zeeman spectra at helium temperature) and the concentration dependent phosphorescence excitation spectra of isotopically mixed crystals the triplet state symmetry and the excitonic Davydov splitting of the low temperature crystalline phase was determined. The resonance pair interaction between the dimer molecules was found to be an order of magnitude smaller than predicted from calculations reported so far.     

Toroid type high-pressure device: history and prospects

The Toroid type high-pressure device and its predecessor, the Chechevitsa (lentil) type high-pressure device, are known to be used efficiently for the synthesis of new materials in recent decades. It was through the Chechevitsa device the first ultradense modification of silica, ‘stishovite’, was obtained. Both devices were essential for the industrial production of superhard materials in the USSR and other socialist countries. In 1980s, almost half of the world synthetic diamond and c-BN products were manufactured by these devices. However, the application of the Toroid device for examining the structure and physical properties of highly compressed substances has been considerably less appreciated. Meanwhile, the device has some unique features that have made possible 35-years of an extensive investigation of physical properties of substances at pressures up to 150 kbar, including electron transport and thermodynamic properties, elastic characteristics, viscosity, thermo-conductivity and other physical properties. Also, the device has been widely employed for structural X-ray and neutron diffraction studies of many materials. But it is not until recently that the convenience of the Toroid device for physical studies has been fully recognized. Through this recognition, the Toroid type device is today becoming increasingly popular among the researchers in the field of high pressures around the world.     

Numerical study on combustion of H2—O2 in a supersonic reactive expansion in a nozzle

A study on expansion flow inside a nozzle considering full mechanism chemistry of hydrogen and oxygen was carried out. In this study, a full implicit scheme for turbulent reactive flow was obtained by combining the second order TVD scheme of Yee and Harten (1987, Implicit TVD schemes for hyperbolic conservation laws in curvilinear coordinates. American Institute of Aeronautics and Astronautics Journal, 25(2), 266–274) with the efficient implicit lower-upper scheme of Shuen and Yoon (1989, Numerical study of chemically reacting flows using a lower-upper symmetric successive overrelaxation scheme. American Institute of Aeronautics and Astronautics Journal, 27(12), 1752–1756). The species equations, Navier–Stokes equations and turbulence model were implemented in the numerical scheme and solved in conjunction with full detailed finite rate chemistry. The numerical scheme is verified by comparison with experimental results of a converging–diverging nozzle. Effects of inlet pressure, temperature and fuel-oxidant mass ratio on nozzle flow field were studied. Variation of chemical species under different conditions was investigated by considering a chemical mechanism. Results show that increasing inlet pressure increases the rate of reactions due to increasing the concentration of reactants. For lower inlet pressure the radical H increases slightly in the diverging part of the nozzle, while for higher pressures it decreases along the nozzle. Inlet fuel–oxidant mass ratio affects the variation of all species with a greater effect for a near stoichiometric ratio. It was also shown that a higher inlet temperature provides a more enhanced reaction zone in the diverging part of the nozzle.     

Turbulence modelling and role of compressibility on oil spilling from a damaged double hull tank

The viscosity plays an important role, and a multiphase solver is necessary to numerically simulate the oil spilling from a damaged double hull tank (DHT). However, it is uncertain whether turbulence modelling is necessary, which turbulence model is suitable; and what the role of compressibility of the fluids is. This paper presents experimental and numerical investigations to address these issues for various cases representing different scenarios of the oil spilling, including grounding and collision. In the numerical investigations, various approaches to model the turbulence, including the large eddy simulation (LES), direct numerical simulation and the Reynolds average Navier–Stokes equation (RANS) with different turbulence models, are employed. Based on the investigations, it is suggested that the effective Reynolds numbers corresponding to both oil outflow and water inflow shall be considered when classifying the significance of the turbulence and selecting the appropriate turbulence models. This is confirmed by new lab tests considering the axial offset between the internal and the external holes on two hulls of the DHT. The investigations conclude for numerically simulating oil spilling from a damaged DHT that when the effective Re is smaller the RANS approaches should not be used and LES modelling should be employed; while when the effective Reynolds numbers is large, the RANS models may be used as they can give similar results to LES in terms of the height of the mixture in the ballast tank and discharge but costing much less CPU time. The investigation on the role of the compressibility of the fluid reveals that the compressibility of the fluid may be considerable in a small temporal‐spatial scale but plays an insignificant role on macroscopic process of the oil spilling. Copyright © 2016 John Wiley & Sons, Ltd.     

Rapid LC‐MS/MS determination and pharmacokinetic application of linarin in rat plasma

A sensitive, selective and robust liquid chromatography tandem mass spectrometry (LC‐MS/MS) method was developed for the rapid determination of linarin in rat plasma. Separation of the analyte and warfarin as internal standard (IS) from 100 μL rat plasma was carried out by simple protein precipitation treatment. Chromatographic separation of the analyte was performed on a Diamonsil® C₁₈ column (150 × 4.6 mm, 5 µm) using isocratic mobile phase consisting of methanol–0.5% formic acid (80:20, v/v). The flow rate was 0.6 mL/min and the total run time was not more than 4.0 min. The method was validated over a wide dynamic concentration range of 1.00–1000 ng/mL for linarin. The precision and accuracy values for linarin met the acceptance criteria according to US Food and Drug Administration guidelines. Linarin was stable in the stability studies including a long‐term test (?80°C for 43 days), a short‐term test (ambient for 2 h and autosampler for 8 h) and three freeze–thaw cycles (?80–25°C). The developed assay method was applied to the pharmacokinetic study in rats after a single intramuscular administration of 713 µg/kg linarin. Copyright © 2012 John Wiley & Sons, Ltd.