Assessment of biogas potential hazards

Biogas produced from anaerobic fermentation of organic substances represents an alternative renewable energy source. Its utilization would contribute to substantial reduction of the solid waste volume in land-filling and incineration. Biogas so produced could be utilized on site or it could be injected into the natural gas distribution network. Microbiological and chemical compositions of different biogas types were determined in order to conduct qualitative and quantitative risk assessments of the potential health hazards associated with biogas use for cooking. Biogas types that could be allowed for injection in the natural gas pipelines were listed with recommendations, while outlining the European biogas injection policy. Results indicated that the injection of the processed biogas in the distribution network did not present any additional chemical or microbiological risk to consumers when compared to natural gas, provided that the biogas resulted from the fermentation of non-dangerous waste. However, since this study did not examine the microbiological and chemical composition of biogas originating from wastewater sludges and/or industrial wastes, the injection of this type of biogas into the gas distribution network should not be allowed unless a similar risk evaluation study is conducted for each case.     

Treatment of uncertain material interfaces in compressible flows

To treat uncertain interface position is an important issue for complex applications. In this paper, we address the characterization of randomly perturbed interfaces between fluids thanks to stochastic modeling and uncertainty quantification through the 2D Euler system. The perturbed interface is modeled as a random field and represented by a Karhunen–Loève expansion. The stochastic 2D Euler system is solved applying Polynomial Chaos theory through the Intrusive Polynomial Moment Method (IPMM). This stochastic resolution method is fully explained and studied (theoretically and numerically). Stochastic Richtmyer–Meshkov unstable flows are solved and presented for several configurations of the uncertain interface (different rugosities) between the fluids. The probability density functions of the mass density of the fluid in the vicinity of the interface are computed built and compared for the different simulations: the system exhibits strong sensitivity with respect to the stochastic initially leading modes.     

Centrifuge model tests of geotextile-reinforced soil embankments during an earthquake

The behavior of geotextile-reinforced embankments during an earthquake was investigated using centrifuge model tests, considering a variety of factors such as gradient of slope, water content of soil, geotextile spacing, and input shaking wave. The geotextile-reinforcement mechanism was revealed on the basis of the observations with comparison of the unreinforced embankment. The geotextile significantly decreases the deformation of the embankment and restricts sliding failure that occurs in the unreinforced embankment during an earthquake. The displacement exhibits an evidently irreversible accumulation with a fluctuation during the earthquake which is significantly dependent on the magnitude of input shaking. The peak strain of the geotextile exhibits a nearly triangular distribution in the vertical direction. The embankment can be divided into two zones, a restricting zone and restricted zone, where the soil and geotextile, respectively, play an active restriction role in the soil-geotextile interaction. The soil restricts the geotextile in the restricting zone, and this restriction is transferred to the restricted zone through the geotextile. The strain magnitude of the geotextile and the horizontal displacement of the geotextile-reinforced embankment decrease with increasing geotextile layers, with decreasing water content of the soil, with decreasing gradient of the slope, and with decreasing amplitude of the earthquake wave.     

Generalized Perpendicular Bisector and exhaustive discrete circle recognition

This paper presents a generalization of the notion of circumcenter as the intersection of perpendicular bisectors. We define Generalized Perpendicular Bisectors between two regions as an area where each point is the center of at least one circle crossing both regions. This allows us to determine all the possible discrete circle centers that cross a given set of pixels. The possible radii can then easily be determined. This exhaustive digital circle parameter computation is adapted to various types of circles/digitization schemes such as Naïve, Pythagorean and standard/supercover circles.     

Improvement of measurement techniques for damping induced by micro-sliding

This paper deals with the damping caused by friction in joints. A new test bench is presented and justified by comparisons made with devices described in the literature. The purpose of this academic bench is to measure the damping induced by partial slip and friction in a planar joint. Moreover, allows uncoupling normal static and dynamic tangential forces. A new method for so-called stopped-sine excitation was developed. It allows more precise monitoring of the evolution of the vibration frequency and damping of non-linear modes. This method is associated with piezoelectric exciters for greater efficiency when stopping excitation. A large number of experimental results are presented and discussed. They are used to characterize the damping induced by micro-sliding in the bonds.     

Controlled release antigen from the injection site--new model for a single-shot vaccination?

Continuously increasing number of available vaccines and a wide use of mass vaccination campaigns lead to the development of simpler methods of vaccine delivery. There is the WHO-sponsored project, including several scientific groups, which aims to reduce the number of repeated administrations of vaccines required for long-term protection and to obviate the need for booster immunization. Such a task may be achieved by the use of controlled-release parenteral systems. One such delivery system comprises microspheres constructed from biodegradable, biocompatible polymers based on poly lactic/glycolic acid. Recent developments of a single-shot tetanus toxoid, encapsulated in the biodegradable polymeric microspheres or microcapsules are reviewed. There are promising advances in the WHO-sponsored project. However, further efforts are needed to elaborate an affective late release of antigen and to obtain a strong booster effect in vaccinated animals.     

Frictional Response of PTFE Sliding Bearings at High Frequencies

Dynamic tests were done on polytetrafluoroethylene (PTFE) sliding bridge bearings to evaluate their frictional characteristics at frequencies above 1 Hz. High frequency seismic responses of PTFE bearings are expected to occur in bridge structures in eastern North America, where the estimated ground motion is well above 1 Hz. Three different PTFE-steel interfaces were tested at frequencies ranging from 0.02 Hz to 5 Hz, with displacement amplitudes of up to ±70 mm and under confining pressures ranging from 5 MPa to 45 MPa. The experimental results showed a significant initial transient frictional response at frequencies above 1 Hz before the dynamic, steady-state, frictional behavior was achieved. This transient response is characterized by an initial high static coefficient of friction that slowly decreases to a dynamic steady-state coefficient of friction after several response cycles. Modifications to an existing mathematical friction model are proposed to take into account this initial transient frictional response.     

The biological properties of Serratia marcescens bacteriophages]

Sixteen phages active against bacteria of the genus Serratia have been divided into 4 groups on the basis of the study of their biological properties. As a result, 5 typing phages have been selected, which permitted the typing of 77.3% of S. marcescens cultures under study, divided into 13 phage types.     

Activity of oxidation-reduction enzymes in endotheliocytes of the intestinal hemomicrocirculatory bed under normal conditions and in portal hypertension

An original quantitative examination of oxidation-reduction enzymes activity in endotheliocytes of hemomicroclrculatory vessels of jejunum and rectum submucosal base in normal state and in portal hypertension was performed by the authors. Comparative analysis of the activity of the enzymes studied revealed different metabolic processes intensity in these organs, dependent on current hemodynamic conditions. Cytochemical changes in hemomicrocirculatory bed are consistent with structural reorganizations that arise in the wall of vessels studied, consist of several phases and may be used as an assessment criterion for defining the portal hypertension stage.     

Analysis of ac-dc conversion for energy harvesting using an electrostrictive polymer P(VDF-TrFE-CFE)

Harvesting systems capable of transforming unused environmental energy into useful electrical energy have been extensively studied for the last two decades. The recent development of electrostrictive polymers has generated new opportunities for harvesting energy. The contribution of this study lies in the design and validation of electrostrictive polymer- based harvesters able to deliver dc output voltage to the load terminal, making the practical application of such material for self-powered devices much more realistic. Theoretical analysis supported by experimental investigations showed that an energy harvesting module with ac-to-dc conversion allows scavenging power up to 7 μW using a bias electric field of 10 V/μm and a transverse strain of 0.2%. This represents a power density of 280 μW/cm(3) at 100 Hz, which is much higher than the corresponding values of most piezo-based harvesters.