General Aspects and Optimization of Enantioselective Biocatalysis in Organic Solvents: The Use of Lipases [New Synthetic Methods (76)]

Enantioselective biocatalysis in nonaqueous media is becoming increasingly important in preparative synthetic chemistry. This article discusses (1) the general catalytic properties of enzymes in nonaqueous environments, (2) the basic principles that govern lipase-catalyzed enantioselective esterification and transesterification reactions in organic media for the preparation of optically active acids and alcohols, (3) the determination of kinetic and thermodynamic parameters, and (4) the quantitative analysis of published data.     

Rheological properties of polyacrylates used as synthetic road binders

Most adhesives and binders, including bitumen for asphalt mixture production, are presently produced from petrochemicals after the refining of crude oil. The fact that crude oil reserves are a finite resource means that in the future, it may become necessary to produce these materials from alternative and probably renewable sources. Suitable resources of this kind may include polysaccharides, plant oils and proteins. This paper deals with the synthesis of polymer binders from monomers that could, in future, be derived from renewable resources. These binders consist of polyethyl acrylate (PEA) of different molecular weight, polymethyl acrylate (PMA) and polybutyl acrylate (PBA), which were synthesised from ethyl acrylate, methyl acrylate and butyl acrylate, respectively, by atom transfer radical polymerisation. The rheological properties of these binders were determined by means of oscillatory testing using a dynamic shear rheometer and combinations of stress/strain, temperature and frequency sweeps. The results indicate that PEA can be produced to have rheological properties similar to that of ‘soft’ 100/150 penetration grade bitumen, PMA with similar rheological properties to that of ‘hard’ 10/20 penetration grade bitumen, while PBA, due to its highly viscous nature and low dynamic moduli, cannot be used on its own as a binder. The synthetic polymers were found to be thermo-rheologically simple, and the shift factors, used to produce the dynamic moduli master curves, were found to fit an Arrhenius function.     

合成氨煤气炉DCS数据建模与统计分析

利用相关系数阵的条件数研究影响煤气炉上部温度的各影响因素之间的复共线性,利用对数回归方法建立煤气炉上部温度与各影响因素之间的线性回归模型。经检验回归方程与回归系数均具有良好的显著性.所建模型对改善炉况,保持生产过程持续稳定具有现实指导意义。     

A version of Stöber synthesis enabling the facile prediction of silica nanospheres size for the fabrication of opal photonic crystals

A sol-gel synthesis procedure based on the method proposed by Stöber et al. (J Colloid Interface Sci 26:302–315, 1968) has been adopted for the one-step preparation of mono-dispersed silica nanospheres. An excellent control of the particle diameter over a wide range is obtained by varying the amount of silicon alkoxide only, while the concentration of all other components is kept fixed: this allows the fabrication of artificial opals with a finely tuned and precisely predictable lattice parameter.     

Synthesis and Crystal Structure of Mercury(II) Metal Crown Ether with N‐Heterocyclic Carbene Linkage

The mercury(II) metal crown ether ( 2a ) was obtained in high yield by reaction of the carbene precursor 1,2‐bis[N‐(1‐naphthylmethylene)imidazoliumethoxy]benzene dihexafluorophosphate ( 1 ) and Hg(OAc)₂. Addition of NaI to the acetone solution of 2a resulted in precipitation of pale yellow solid 2b . The structures of 2a and 2b were determined by single‐crystal X‐ray diffractometry. Both molecules display a helical conformation with a torsional cycle. The mercury atom in complex 2a is tricoordinated by two intramolecular carbene carbon atoms and an acetate oxygen atom. The mercury atom in complex 2b is tetracoordinated by two intramolecular carbene carbon atoms and two cis‐iodine atoms.     

高分子共混物中氢键的作用Ⅱ.氢键对高分子共混物性能的影响以及引入方法

高分子共混物中氢键的存在能促进共混组分具有更好的可混和性.因此,研究高分子共混物中的氢键对高分子的共混改性具有重要的理论和实用价值.本文是<高分子共混物中氢键的Ⅰ.氢键的特征描述以及影响因素>的下篇,将继续介绍高分子共混物中氢键的作用,主要包括氢键对高分子共混物性能的影响以及主要的引入氢键的方法.特别地,本文通过将高分子共混物分为合成高分子与合成高分子共混物,合成高分子与天然高分子共混物以及合成高分子与其它物质共混物,总结了氢键存在对共混物性能的影响.     

Environmental biodegradation of synthetic polymers I. Test methodologies and procedures

Biodegradation of synthetic polymers is an important property that is used in many applications. Evaluation of the extent of biodegradation has used different methods in recent years. For each environmental compartment, different approaches have to be made in order to obtain valuable data on biodegradability.This review describes validated and accepted methods based on standardized biodegradation tests, analytical tests, enzymatic tests or tests of physical properties to evaluate the biodegradability of synthetic polymers for different types of environmental compartments (e.g., soil, compost or aqueous media).Part II of this review will subsequently report on the environmental biodegradation of different groups of synthetic polymers.     

Selective recognition of ovalbumin using a molecularly imprinted polymer

Micro-contact imprinting has been used to form thin-film molecular imprints of ovalbumin (OVA) in polymers supported on glass slides. Thermocalorimetric data was used to optimise the choice of functional monomer and cross-linker to maximise selectivity and minimise non-specific recognition.A polymer comprising polyethyleneglycol 400 dimethacrylate (95 vol.%) and methacrylic acid (5 vol.%) showed both maximum recognition for OVA when made as a molecularly imprinted polymer (MIP), and minimal recognition when made as a non-imprinted, i.e. control polymer. OVA rebinding to the molecularly imprinted polymer, from a buffered 2 µM OVA solution, was 1.55 × 10^{− 11} mol cm^{− 2}, while the control polymer showed 10-fold less re-binding, i.e. 0.154 × 10^{− 11} mol cm^{− 2}.Experiments in which human serum albumin (HSA), conalbumin, ovomucoid or lysozyme, were re-bound to the polymers, either as single proteins or in competition with OVA, showed them to have low affinity for the polymer formulation used. Of the competing proteins examined, in non-competitive binding experiments, HSA showed the greatest affinity 0.45 × 10^{− 11} mol cm^{− 2} for the OVA imprinted polymer. In two protein competition experiments, i.e. with OVA and a competing protein present at equal concentrations (2 µM), OVA binding to the OVA imprinted polymer was in all cases significantly greater than that of the competitor.     

Determination of synthetic polycyclic musks in water by microwave-assisted headspace solid-phase microextraction and gas chromatography-mass spectrometry

This paper describes a rapid and solvent-free method, microwave-assisted headspace solid-phase microextraction (MA-HS-SPME), for the extraction of six commonly used synthetic polycyclic musks: galaxolide (HHCB), tonalide (AHTN), celestolide (ADBI), traseolide (ATII), cashmeran (DPMI) and phantolide (AHMI) from water samples prior to their determination using gas chromatography-mass spectrometry (GC-MS). The effects of various extraction parameters for the quantitative extraction of these analytes by MA-HS-SPME were systematically investigated and optimized. The analytes in a 20-mL water sample (in a 40-mL sample-vial containing 4 g of NaCl) were efficiently extracted by a polydimethylsiloxane-divinylbenzene (PDMS-DVB) fiber placed in the headspace when the system was microwave irradiated at 180 W for less than 4 min. The limits of detection (LODs) ranged from 0.05 to 0.1 ng/L, and the limits of quantification (LOQs) were less than 0.2 ng/L. A preliminary analysis of wastewater samples revealed that HHCB and AHTN were the two most commonly detected synthetic polycyclic musks; using a standard addition method, their concentration were determined to range from 1.2 to 37.3 ng/L with relative standard deviation (RSD) ranging from 2 to 6%. The results obtained using this approach are better than those from the conventional oil-bath HS-SPME.     

Synthetic strategies to 2′-hydroxy-4′-methylsulfonylacetophenone,a key compound for the preparation of flavonoid derivatives

Different strategies for the synthesis of 2′-hydroxy-4′-methylsulfonylacetophenone are reported in the present paper. This compound is considered as a key synthon for the synthesis of new flavonoid derivatives designed as potential cyclooxygenase-2 inhibitors. The retrosynthetic approach via 3′-methylsulfonylacetophenone, which included three synthetic pathways, did not allow us to obtain the expected compound. However, a synthesis from 3-mercaptophenol led to the desired acetophenone in three steps: thiophenol methylation, Friedel–Crafts acetylation and oxidation of the sulphide to the corresponding sulfone. The desired compound, 2′-hydroxy-4′-methylsulfonylacetophenone, will be used as a synthon for the preparation of novel flavonoid derivatives, such as 2′-hydroxychalcones, flavanones, flavones, and flavonols.