Multiwall carbon-nanotube-doped ion conducting polymer electrolyte for electrochemical application

Electrical, structural and optical properties of a composite containing a polymer electrolyte (namely polyethylene oxide complexed with sodium iodide) and multiwall carbon nanotube (MWCNT) are reported. The films of these composites were ‘solution casted’ using the viscous solution of polyethylene oxide (PEO) complexed with sodium iodide (NaI) in desired ratios and characterised using various techniques. The conductivity versus composition plot in PEO:NaI shows conductivity maxima at 12?wt% NaI concentration while in MWCNTs doped polymer electrolyte it occurs at 40?wt% MWCNTs concentration. The surface morphology by scanning electron microscopy (SEM) shows the enhancement in amorphous reason by MWCNTs doping which is a well-known favourable condition for conductivity enhancement. The differential scanning calorimetry shows that dispersal of MWCNTs reduces the crystallinity of polymer electrolyte that is well-supported by our polarised optical micrographs and SEM measurements.     

Photoelectrochemical behaviour of mixed polycrystalline n-type CdS-CdSe electrodes

The spectral photoresponse and the current-voltage (I–V) characteristics of the illuminated n-CdS electrode in 1 M Na₂S, 1 M S and 1 M KOH electrolyte were measured. Both pressure-sintered and electro-deposited polycrystalline CdS electrodes were used in the study of their photoelectrochemical behaviour. The results indicate that the addition of a small amount of CdSe into the CdS electrode enhances the performance of the photoelectrochemical (PEC) cell.     

In vitro biocompatibility and antimicrobial activity of wet chemically prepared Ca10−xAgx(PO4)6(OH)2 (0.0 ≤ x ≤ 0.5) hydroxyapatites

Herein, we report the effect of silver ions on the physical, antimicrobial and cytocompatibility properties of wet chemically synthesized silver doped Ca_10?xAg_x(PO₄)₆(OH)₂ (0.0 ≤ x ≤ 0.5) hydroxyapatites (HAp). Silver ions containing HAp exhibit the comparable density, hardness and enhanced antimicrobial properties, in comparison to parent HAp. The optical absorption measurements confirm the presence of silver ions in the doped compositions, which are responsible for as increased antimicrobial property of doped HAp materials for x > 0.3. The cytotoxicity behavior of the doped HAp was evaluated using mouse fibroblast (L929) cell line. The important result has been that doped HAp (x > 0.3) exhibit statistically (significant) lower cell viability in comparison to undoped HAp. However, no difference in cellular functionality on doped HAp surfaces, in terms of cell adhesion and proliferation could be qualitatively observed in reference to undoped HAp. In order to explain the observed antimicrobial and cell viability properties, the in vitro release of Ag⁺ ions has been quantified using Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES) and solubility was measured by weight loss in acetate buffer solution.     

Solar-based photoreduction of methyl orange using zeolite supported photocatalytic materials

A new class of novel photocatalysts has been prepared by supporting TiO₂ on the zeolite matrix by various routes of synthesis. Different transition metals like cobalt, nickel, and ruthenium have been incorporated in these photocatalysts, alongwith molybdenum based heteropolyacid (HPA) to improve the photocatalytic activity of these materials. Photoreduction of methyl orange under solar radiation was compared with photoreduction in presence of artificial visible light illumination to evaluate their photocatalytic activity. The quantity of methyl orange photoreduced by the cobalt containing photocatalyst was about 2.40 mg/g of TiO₂ under the influence of sunlight as compared to 4.111 mg/g of TiO₂ under artificial visible light illumination. However, the efficiency of the photocatalyst is high as compared to P25 TiO₂ under solar light (0.508 mg/g of TiO₂). The high photocatalytic activity of these materials is due to the synergistic effect of incorporation of transition metals in combination with TiO₂ and HPA supported by the zeolite matrix. These materials are being evaluated for photocatalytic water splitting.     

Analytical modeling of subthreshold current and subthreshold swing of Gaussiandoped strained-Si-on-insulator MOSFETs

This paper presents the analytical modeling of subthreshold current and subthreshold swing of short- channel fully-depleted （FD） strained-Si-on-insulator （SSOI） MOSFETs having vertical Gaussian-like doping pro- file in the channel. The subthreshold current and subthreshold swing have been derived using the parabolic approx- imation method. In addition to the effect of strain on silicon layer, various other device parameters such as channel length （L）, gate-oxide thickness （tox）, strained-Si channel thickness （ts_Si）, peak doping concentration （Np）, project range （Rp） and straggle （op） of the Gaussian profile have been considered while predicting the device characteris- tics. The present work may help to overcome the degradation in subthreshold characteristics with strain engineering. These subthreshold current and swing models provide valuable information for strained-Si MOSFET design. Ac- curacy of the proposed models is verified using the commercially available ATLASTM, a two-dimensional （2D） device simulator from SILVACO.     

Arsenic speciation of solvent-extracted leachate from new and weathered CCA-treated wood

For the past 60 yr, chromate-copper-arsenate (CCA) has been used to pressure-treat millions of cubic meters of wood in the United States for the construction of many outdoor structures. Leaching of arsenic from these structures is a possible health concern as there exists the potential for soil and groundwater contamination. While previous studies have focused on total arsenic concentrations leaching from CCA-treated wood, information pertaining to the speciation of arsenic leached is limited. Since arsenic toxicity is dependent upon speciation, the objective of this study was to identify and quantify arsenic species leaching from new and weathered CCA-treated wood and CCA-treated wood ash. Solvent-extraction experiments were carried out by subjecting the treated wood and the ash to solvents of varying pH values, solvents defined in the EPA's Synthetic Precipitation Leaching Procedure (SPLP) and Toxicity Characteristic Leaching Procedure (TCLP), rainwater, deionized water, and seawater. The generated leachates were analyzed for inorganic As(III) and As(V) and the organoarsenic species, monomethylarsonic acid (MMAA) and dimethylarsinic acid (DMAA), using high-performance liquid chromatography followed by hydride generation and atomic fluorescence spectrometry (HPLC-HG-AFS). Only the inorganic species were detected in any of the wood leachates; no organoarsenic species were found. Inorganic As(V) was the major detectable species leaching from both new and weathered wood. The weathered wood leached relatively more overall arsenic and was attributed to increased inorganic As(III) leaching. The greater presence of As(III) in the weathered wood samples as compared to the new wood samples may be due to natural chemical and biological transformations during the weathering process. CCA-treated wood ash leached more arsenic than unburned wood using the SPLP and TCLP, and ash samples leached more inorganic As(III) than the unburned counterparts. Increased leaching was due to higher concentrations of arsenic within the ash and to the conversion of some As(V) to As(III) during combustion.     

Diurnal variations in circulating estradiol, testosterone, melatonin and harderian gland porphyrin concentration in Indian palm squirrel, Funambulus pennanti

A two-peak cyclicity in the plasma level of melatonin, estradiol/testosterone and Harderian porphyrin was noted in F. pennanti. An inverse relationship of Harderian porphyrin with plasma melatonin and a direct relation of it with plasma estradiol/testoserone level were also observed, suggesting that the variation of Harderian, porphyrin concentration may be under the control of both, circulating melatonin and gonadal steroids.     

A Bubble Propagation Model for Pipeline Performance

Pipelining is a very commonly used implementation technique whereby multiple operations are overlapped in their successive phases of execution. An identifiable phase of an operation execution constitutes a pipe stage. Ideally, the time required to complete any of the phases does not exceed 1 clock cycle. In practice, quite often one or more of the pipeline stages take longer than 1 cycle to process the data. Such a stage is considered stalled or frozen, and during this period, instead of transmitting some intermediate result to the following stage, the stalled stage is said to be transmitting bubbles. This paper proposes an analytical model for predicting pipeline performance based on reception, generation, and transmission of these bubbles. The model proposed is shown to be an effective tool for estimating overall performance of small pipelines (5 to 6 stages deep) using the delay distributions of individual stages. The proposed model is an order of magnitude faster than the corresponding simulations. It provides the complete delay distribution (instead of just the average) of the overall performance. Also, the model is considerably less computationally complex than alternative exact analytical approaches such as the discrete-time Markov model.     

Toxoplasma gondii recombinant antigens H4 and H11: use in ELISAs for detection of toxoplasmosis in swine

The prevalence of elevated blood lead (PbB) levels in rural and semi-urban areas of Kwazulu/Natal (KZN) as well as the risk factors for elevation of PbB among children in informal settlements are examined. The study involved over 1200 children in two age groups: 3-5 and 8-10 years old. Average PbB level in Besters, an informal settlement in the Durban metropolitan region, was 10 micrograms/dl with 5% of the children showing PbB level of greater than 25 micrograms/dl. By comparison, average PbB value in Vulamehlo, a rural area located 90-120 km from Durban, was 3.8 micrograms/dl and 2% of the PbB was greater than 10 micrograms/dl. The results show that many children in KZN are at risk of being lead poisoned. Household factors that were significantly associated with PbB levels in children included distance from tarred roads, overcrowding, hygienic habits in the household and the burning of solid wastes for heating or cooking. Lack of significant association with child risk behaviors is attributed to the over-riding influence of high levels of contaminated dusts both indoor and outdoor. With recent introduction of unleaded gasoline in South Africa, a number of unique socio-ecological factors are expected to slow the change in PbB levels of children in some townships.