Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.     

The Structure of A Turbulent Jet in A Crossflow-Effect of Jet-Crossflow Velocity

A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined jets without excess streamwise momentum are considered. The numerical results of the Standard two-equation k-ε model show that the turbulent structure can be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R> 4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallel with the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20-60. The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated, vvith distinct double concentr     

Effect of Sea Level Variation on Tidal Characteristic Values for the East China Sea

1 .IntroductionTheglobalairtemperatureroseabout 0 .5～ 0 .6°Coverthepast 2 0thcentury ,andtheglobalmeansealevelincreasedbyabout2 0cmduringtheperiod .Theregionalmeansealevelriseswiththerisingglobalmeansealevel.Zuoetal.( 1 997)indicatedthatthemeanrisingrateofabsolutemeansealevelalongtheChinacoastontheassumptionofunifiedisostaticdatumis 2mm a .Woodworth( 1 999)analyzedsealevelspanning 1 76 8tothepresentinLiverpool,andobtainedaseculartrendforheperiodupto 1 880of0 .39± 0 .1 7mm a ,andatrendfort…     

Hilbert Transferin Applied to Separation of Waves

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

Effect of the Twin Jetties as A Regulating Structure at the Tao-er Estuary

The phase one project of the twin jetties at the Tao-er Estuary yields no effect on the flow, and there is a large area of deposition. A numerical model is employed to simulate the flow field, and the scouring and silting in the channel be-tween the two jetties are analyzed. The results show that the effective tidal flux between the two jetties is reduced due to the notch located at the heel of the east jetty, and the effect of contraction-flush is not obvious. As for the regulation of this kind of estuary under the tide action, the capability of tidal flux should be fully used.     

Numerical Simulation of Non-Linear Wave Propagation in Waters of Mildly Varying Topography with Complicated Boundary

In this paper, the characteristics of different forms of mild slope equations for non-linear wave are analyzed, and new non-linear theoretic models for wave propagation are presented, with non-linear terms added to the mild slope equations for non-stationary linear waves and dissipative effects considered. Numerical simulation models are developed of non-linear wave propagation for waters of mildly varying topography with complicated boundary, and the effects are studied of different non-linear corrections on calculation results of extended mild slope equations. Systematical numerical simulation tests show that the present models can effectively reflect non-linear effects.     

鄂尔多斯坳陷湖盆缓坡型三角洲前缘沉积微相分带及成因分析——以定边-安边地区延长组长6油组为例

运用沉积相分析理论对鄂尔多斯盆地定边-安边地区晚三叠世延长组坳陷湖盆缓坡型三角洲前缘沉积微相组合进行系统研究,共识别出其组合形式有:水下分流河道叠加组合、河口坝叠加组合、水下分流河道与河口坝叠加组合以及河口坝与远砂坝、席状砂的叠加组合等4大类9种类型。并深入研究三角洲前缘沉积微相组合的时空分布规律,以三角洲前缘坡折带为界,将三角洲前缘分为"台型前缘"、"坡型前缘"和"盆型前缘"三部分,各部分有独特的沉积微相组合形式。高分辨率层序地层学的基准面旋回原理和沉积物体积分配原理表明:短期基准面的规律性变化影响着储层砂体的成因类型、叠加组合形式和空间分布规律,据此建立坳陷湖盆三角洲前缘不同沉积微相组合的成因分布模式。