Al2O3掺杂BaTi0.85Sn0.15O3陶瓷的制备及性能表征

通过传统固相二次烧结法来制备x wt% Al₂O₃（x=0、1.0、1.5）/BaTi_0.85Sn_0.15O₃（BTS）陶瓷。研究了掺杂不同含量Al₂O₃对BTS陶瓷的微观结构、介电性能及挠曲电性能的影响。结果表明,掺杂Al₂O₃的BTS陶瓷不改变陶瓷的晶体结构,仍为标准钙钛矿结构晶型;Al₂O₃的掺入能够有效降低晶粒尺寸,具有明显的细晶作用。随着Al₂O₃含量的增大,Al₂O₃/BTS陶瓷的介电常数减小,介电损耗得到明显改善,居里峰逐渐宽化且向温度高的方向偏移。Al₂O₃/BTS陶瓷的挠曲电系数随着Al₂O₃含量的增加和测试环境温度的升高均减小。此外,Al₂O₃/BTS陶瓷的挠曲电系数和介电常数之间存在一种近线性关系,但当温度非常接近于居里温度时,这种线性关系减弱。     

机械球磨制备纳米W03粉末的研究

采用机械球磨湿法工艺制备了纳米级WO3粉末。研究了球磨时间、球料比、固液比等球磨参数对粉末粒度的影响：球磨时间和球料比对粉末粒度影响很大，但过久延长球磨时间或增大球料比并不能起到进一步细化的作用，反而会增加WC杂质的引入量；过高或过低的固液比都不利于WO3粉末的细化。为得到纳米级且纯度较高的WO3粉末，降低WC的含量，经反复实验得到最佳工艺条件为：球料比l：l，固液比1：0．5，球磨时间48h.     

Enthalpy and heat capacity of LiAlO2 between 298 and 1700 K by drop calorimetry

The enthalpy of γ-LiAlO₂ was measured between 403 and 1673 K by isothermal drop calorimetry. The smoothed enthalpy curve between 298 and 1700 K results in H⁰(T) − H⁰(298 K)=−37 396 + 93.143 · T + 0.00557 · T² + 2 725 221 · T⁻¹ J/mol. The standard deviation is 2.2%. The heat capacity was derived by differentiation of the enthalpy curve. The value extrapolated to 298 K is C_p,298=(65.8 ± 2.0) J/K mol.     

Space-efficient recognition of sparse self-reducible languages

Mahaney and others have shown that sparse self-reducible sets have time-efficient algorithms, and have concluded that it is unlikely that NP has sparse complete sets. Mahaney's work, intuition, and a 1978 conjecture of Hartmanis notwithstanding, nothing has been known about the density of complete sets for feasible classes until now. This paper shows that sparse self-reducible sets have space-efficient algorithms, and in many cases, even have time-space-efficient algorithms. We conclude that NL, NC ^k , AC ^k , LOG(DCFL), LOG(CFL), and P lack complete (or even Turing-hard) sets of low density unless implausible complexity class inclusions hold. In particular, if NL (respectively P, _k , or NP) has a polylog-sparse logspace-hard set, then NLSC (respectively PSC, _k , or PHSC), and if P has subpolynomially sparse logspace-hard sets, then PPSPACE.     

On the bounded-real and positive-real conditions for affine nonlinear state-delayed systems and applications to stability

In this paper, bounded-real conditions for affine nonlinear state-delayed systems are derived using the concept of dissipativeness. Necessary and sufficient conditions for the system to be dissipative and to have finite L₂-gain also referred to as the bounded-real condition are given. The implications on the stability of the system and feedback interconnections of such systems are also considered. Finally, an equivalent of the positive-real lemma is derived and its implications on stability of the system and feedback interconnections of such systems are similarly discussed.     

On pseudo-fuzzy linear mappings

In this paper we study a more general class of linear maps on fuzzy subsets of vector spaces than those on fuzzy subspaces. We obtain a version of the fundamental theorem of homomorphisms which applies to these pseudo-fuzzy linear maps. In the case of fuzzy subspaces, the results become those for fuzzy linear maps. We introduce the notion of magnification of pseudo-fuzzy linear mappings. It is shown that this notion behaves well with respect to the fundamental theorem and with respect to the composition of mapping. We note that the class of distribution functions of random variables naturally produces pseudo-fuzzy linear mappings, which are not fuzzy linear mappings. We observe that pseudo-fuzzy linear mappings are examples of gain relations. We consider general properties of these relations as well as many other examples. From these results additional properties of pseudo-fuzzy linear mappings are obtained.     

TS-03全固态PDM中波发射机开关机控制电路工作原理及常见故障分析

在现阶段,中波广播的传输发射普遍使用的是全固态PDM中波发射机。在中波广播事业的发展中,发射机的不可替代性决定了其地位和作用,因此对发射机的运行及维护相关知识的了解至关重要。本文基于TS-03全固态PDM中波发射机展开论述,探讨其开关机控制电路工作原理,分析发射机常见故障及检修思路,以供参考。     

G02(G03)代码在数控车床编程中的正确应用

当采用数控编程 G代码编制数控车床加工程序时 ,容易出现 G0 2 (G0 3)代码使用不当而造成编程错误。本文论述了如何正确理解 G0 2 (G0 3)代码的定义 ,从而保证正确使用 G0 2 (G0 3)代码编制数控加工程序。