Stable Aqueous Anode-Free Zinc Batteries Enabled by Interfacial Engineering

Anode-free zinc batteries (AFZBs) are proposed as promising energy storage systems due to their high energy density, inherent safety, low cost, and simplified fabrication process. However, rapid capacity fading caused by the side reactions between the in situ formed zinc metal anode and electrolyte hinders their practical applications. To address these issues, aqueous AFZBs enabled by electrolyte engineering to form a stable interphase are designed. By introducing a multifunctional zinc fluoride (ZnF₂) additive into the electrolyte, a stable F-rich interfacial layer is formed. This interfacial layer can not only regulate the growth orientation of zinc crystals, but also serve as an inert protection layer against side reactions such as H₂ generation. Based on these synergy effects, zinc deposition/dissolution with high reversibility (Coulombic efficiency > 99.87%) and stable cycling performance up to 600 h of are achieved in the electrolyte optimized by ZnF₂. With this electrolyte, the cycling life of AFZBs is significantly improved. The work may initiate the research of AFZBs and be useful for the design of high energy, high safety, and low-cost power sources.     

Surface Reconstruction Engineering with Synergistic Effect of Mixed-Salt Passivation Treatment toward Efficient and Stable Perovskite Solar Cells

Surface passivation treatment is a widely used strategy to resolve trap-mediated nonradiative recombination toward high-efficiency metal-halide perovskite photovoltaics. However, a lack of passivation with mixture treatment has been investigated, as well as an in-depth understanding of its passivation mechanism. Here, a systematic study on a mixed-salt passivation strategy of formamidinium bromide (FABr) coupled with different F-substituted alkyl lengths of ammonium iodide is demonstrated. It is obtained better device performance with decreasing chain length of the F-substituted alkyl ammonium iodide in the presence of FABr. Moreover, they unraveled a synergistic passivation mechanism of the mixed-salt treatment through surface reconstruction engineering, where FABr dominates the reformation of the perovskite surface via reacting with the excess PbI₂. Meanwhile, ammonium iodide passivates the perovskite grain boundaries both on the surface and top perovskite bulk through penetration. This synergistic passivation engineer results in a high-quality perovskite surface with fewer defects and suppressed ion migration, leading to a champion efficiency of 23.5% with mixed-salt treatment. In addition, the introduction of the moisture resisted F-substituted groups presents a more hydrophobic perovskite surface, thus enabling the decorated devices with excellent long-term stability under a high humid atmosphere as well as operational conditions.     

通信工程网络安全与对策探讨

分析研究目前通信工程网络安全问题,提出几点解决问题的对策,旨在为提升通信工程网络安全性提供一定的帮助,以此来促使通信工程网络系统安全性的提升。     

Stimuli-Responsive Nanocomposite Hydrogels for Biomedical Applications

The complex tissue-specific physiology that is orchestrated from the nano- to the macroscale, in conjugation with the dynamic biophysical/biochemical stimuli underlying biological processes, has inspired the design of sophisticated hydrogels and nanoparticle systems exhibiting stimuli-responsive features. Recently, hydrogels and nanoparticles have been combined in advanced nanocomposite hybrid platforms expanding their range of biomedical applications. The ease and flexibility of attaining modular nanocomposite hydrogel constructs by selecting different classes of nanomaterials/hydrogels, or tuning nanoparticle-hydrogel physicochemical interactions widely expands the range of attainable properties to levels beyond those of traditional platforms. This review showcases the intrinsic ability of hybrid constructs to react to external or internal/physiological stimuli in the scope of developing sophisticated and intelligent systems with application-oriented features. Moreover, nanoparticle-hydrogel platforms are overviewed in the context of encoding stimuli-responsive cascades that recapitulate signaling interplays present in native biosystems. Collectively, recent breakthroughs in the design of stimuli-responsive nanocomposite hydrogels improve their potential for operating as advanced systems in different biomedical applications that benefit from tailored single or multi-responsiveness.     

Effects of hydrogen plasma treatment on the physical and chemical properties of tin oxide thin films for ambipolar thin-film transistor applications

In this study, we investigated the physical and chemical properties of H₂ plasma-treated tin oxide (SnO_X) thin films, followed by their applications in ambipolar thin-film transistors (TFTs). Finely controlled H₂ implantation was carried out using a reactive-ion-etching system at a radio frequency power of 30 W and under various exposure times. H₂ plasma treatments induced changes in the chemical structures and surface morphologies of the SnO_X thin films, including a partial phase transformation of Sn and SnO to SnO₂. The defects originating from oxygen vacancies (O_Vacs) in the SnO_X thin films were passivated by H via the formation of Sn–H bonds, which decreased the density of subgap states in the SnO_X thin films. The H₂ plasma-treated SnO_X TFTs showed considerably improved ambipolarity and electrical performance. Complementary metal–oxide–semiconductor (CMOS) logic inverters comprising H₂-plasma-treated ambipolar SnO_X TFTs exhibited a maximum gain of 34.5 V/V at a supply voltage of 10 V. The results of this study present the meaningful investigation of H₂ plasma-treated ambipolar SnO_X TFTs that can be used to fabricate CMOS circuits for various applications.     

Ultracompact methane steam reforming reactor based on microwaves susceptible structured catalysts for distributed hydrogen production

Hydrogen is a potential green energy vector. Since the heating of the reforming processes commonly used for its production is obtained by burning hydrocarbons, it has a substantial CO₂ footprint. One of the most critical aspects in the methane steam reforming (MSR) reaction is the heat transfer to the catalytic volume, due to the high heat fluxes required to obtain high methane conversions. Consequently, the reactor has complex geometries, along with the heating medium being characterized by temperatures higher than 1000 °C; expensive construction materials and high reaction volumes are therefore needed, resulting in slow thermal transients. These aspects increase the costs (both operative and fixed) as well as cause a decrease in the whole process efficiency. The heat transfer limitations due to the endothermicity of methane steam reforming reaction could be effectively overcome by microwave (MW) heating. This heating technique, that depends only on the dielectric properties of the materials, can result in an efficient and faster method for transferring heat directly to the catalyst, thus generating the heat directly inside the catalytic volume. In this work, Ni-based catalysts, differing from each other by the Ni loading (7 and 15 wt% with respect to the washcoat) were prepared. The catalysts were characterized by means of several techniques and tested in the MW-assisted methane steam reforming reaction. Furthermore, the energy balance of the entire process was performed to calculate the energy efficiency, making a preliminary evaluation of its feasibility in distributed hydrogen production also possible. The results of the preliminary tests showed that the prepared structured catalysts are very susceptible to the MW radiation, and that in the presence of the MSR reaction, it is possible to make the system reach a temperature of 900 °C. In the same tests, the CH₄ conversion showed a good approach to the thermodynamic equilibrium values starting at temperatures of about 800 °C at a value of gas hourly space velocity (GHSV) of about 5000 h^?1. The energy efficiency of the lab-scale system, calculated as the ratio among the energy absorbed by the system and the energy supplied by the microwaves, was about 50%. Future studies will deal with the microwave reactor optimization, aiming at the increase of the energy efficiency of the system, as well as to obtain a higher CH₄ conversion at lower temperatures and increase the H₂ yield and selectivity.     

Human–Cyber–Physical Systems (HCPSs) in the Context of New-Generation Intelligent Manufacturing

An intelligent manufacturing system is a composite intelligent system comprising humans, cyber systems, and physical systems with the aim of achieving specific manufacturing goals at an optimized level. This kind of intelligent system is called a human–cyber–physical system (HCPS). In terms of technology, HCPSs can both reveal technological principles and form the technological architecture for intelligent manufacturing. It can be concluded that the essence of intelligent manufacturing is to design, construct, and apply HCPSs in various cases and at different levels. With advances in information technology, intelligent manufacturing has passed through the stages of digital manufacturing and digital-networked manufacturing, and is evolving toward new-generation intelligent manufacturing (NGIM). NGIM is characterized by the in-depth integration of new-generation artificial intelligence (AI) technology (i.e., enabling technology) with advanced manufacturing technology (i.e., root technology); it is the core driving force of the new industrial revolution. In this study, the evolutionary footprint of intelligent manufacturing is reviewed from the perspective of HCPSs, and the implications, characteristics, technical frame, and key technologies of HCPSs for NGIM are then discussed in depth. Finally, an outlook of the major challenges of HCPSs for NGIM is proposed.     

Optoregulated Drug Release from an Engineered Living Material: Self‐Replenishing Drug Depots for Long‐Term,Light‐Regulated Delivery

On‐demand and long‐term delivery of drugs are common requirements in many therapeutic applications, not easy to be solved with available smart polymers for drug encapsulation. This work presents a fundamentally different concept to address such scenarios using a self‐replenishing and optogenetically controlled living material. It consists of a hydrogel containing an active endotoxin‐free Escherichia coli strain. The bacteria are metabolically and optogenetically engineered to secrete the antimicrobial and antitumoral drug deoxyviolacein in a light‐regulated manner. The permeable hydrogel matrix sustains a viable and functional bacterial population and permits diffusion and delivery of the synthesized drug to the surrounding medium at quantities regulated by light dose. Using a focused light beam, the site for synthesis and delivery of the drug can be freely defined. The living material is shown to maintain considerable levels of drug production and release for at least 42 days. These results prove the potential and flexibility that living materials containing engineered bacteria can offer for advanced therapeutic applications.     

Virtual engineering of cyber-physical automation systems: The case of control logic

Mastering the fusion of information and communication technologies with physical systems to cyber-physical automation systems is of main concern to engineers in the industrial automation domain. The engineering of these systems is challenging as their distributed nature and the heterogeneity of stakeholders and tools involved in their engineering contradict the need for the simultaneous engineering of their cyber and physical parts over their life cycle. This paper presents a novel approach based on the virtual engineering method, which provides support for the simultaneous engineering of the cyber and physical parts of automation systems. The approach extends and integrates the life cycle centered view mandated by current conceptual architectures and the digital twin paradigm with an integrated, iterative engineering method. The benefits of the approach are highlighted in a case study related to the engineering of the control logic of a cyber physical automation system originating from the process engineering domain. We describe for the first time a modular domain ontology, which formally describes the cyber and physical part of the system. We present cyber services built on top of the ontology layer, which allow to automatically verify different control logic types and simultaneously verify cyber and physical parts of the system in an incremental manner.     

煤直接液化反应中分散相催化剂研究进展

煤直接液化工艺中催化剂作用十分重要,粒径小、分散性高的催化剂能够有效提升煤转化效率。将流动反应介质中小颗粒的固体催化剂命名为分散相催化剂,综述煤直接液化中常用的几种分散相催化剂,包括金属卤化物催化剂、过渡金属氧化物催化剂和铁系催化剂,提出可能的催化机理。