Combination of interference alignment and beamforming in cellular networks

In this paper, we propose two joint transmit-receive iterative algorithms without the cooperation between different base stations based on the idea of interference alignment (IA) to improve the throughput of relay backhaul links in cellular networks for the case of imperfect channel knowledge,which can be implemented with small changes to existing TD-LTE standards. Unlike the previous interference alignment algorithms’ only reducing the sum interference to the other receivers at the transmitter or the sum received Multi-user interference (MUI) at the receiver, our algorithm shapes the transmission of each data stream at transmitters in order not only to minimize interference to the other users, but also to minimize the interference between different streams objected to the same user, suppressing the MUI and Multi-stream interference (MSI) at receivers. The proposed algorithm I is to maximize the SINR at receivers. But the complexity is relatively high. Algorithm II only needs linear operations and sacrifices a little performance for much lower complexity compared to the Maximize SINR iterative algorithm which needs the inversion operation of matrix. It is also proved that the algorithm converges monotonically. The simulation results show that the techniques have considerable performance gain compared with the previous algorithms. Further research about power allocation is also discussed.     

Degradation mechanism of lacquered tinplate in energy drink by in-situ EIS and EN

The corrosion process of phenolic epoxy coated tinplate in energy drink was investigated by in-situ electrochemical impedance spectroscopy(EIS) and electrochemical noise(EN) techniques. The experimental results indicate that the degradation process of novolac epoxy coated tinplate in energy drink can be divided into three main stages: organic coating wetted by the beverage; corrosion initiation beneath the organic coating; and corrosion extension process. It was proposed that the tin coating and carbon steel were mainly corroded by organic acids in energy drink through the pores of the organic coating. After the tin coating was corroded, the carbon steel started to corrode due to its higher electrochemical activity and became to be the dominated corrosion reaction.     

基于VRML的多用户环境研究和虚拟场景的创建

在讨论虚拟社区和基于VRML的多用户环境的基础上,结合Java和VRML给出了虚拟社区中场景建立、3D替身的导入以及EAI应用的方法。     

利用FPGA实现MMC2107与SDRAM接口设计

介绍基于现场可编程门阵列(FPGA)，利用VHDL语言设计实现MMC2107与SDRAM接口电路。中包括MMC2107组成结构、SDRAM存储接口结构和SDRAM控制状态机的设计。     

港航基建工程管理信息系统的开发

本文介绍了浙江省港航基建工程管理系统的系统组成、系统分析与设计及系统实现。重点介绍了为提高系统的可用性、操作直观性和易维护性所采取的关键技术措施。     

磁性微球制备方法

在总结近年来国内外有关磁性微球研究成果的基础上,对磁性微球进行了分类,着重对高分子磁性微球的几种主要制备方法和工艺过程进行了概述。     

干粉煤气化装置配套变换装置中的腐蚀

简述了干粉煤气化装置配套变换装置中的腐蚀种类和腐蚀机理,并对相应的选材要求进行了说明。     

无人值守中压配电站智能防盗及防误联动系统的研究

通过对苏州配网现存问题的分析和研究,利用物联网技术和现代通信技术,提出了针对城市配电网的配电站智能防盗及防误系统的解决方案,介绍了该方案的组成、功能和相关产品。     

电缆测井高速遥传系统中比特分配与星座映射的实现

通过在现有的硬件平台提高电缆的传输速率,优化系统硬件平台内部资源分配。采用"注水"算法进行信道比特及能量联合分配。该方法与子信道能量均匀分配方式相比,链路层传输速率提高9.13%。设计了一种OFDM系统中星座映射的新方法,与原有方法相比,新方法大大节约了硬件存储资源。     

基于拓扑优化的4 m 望远镜底座结构设计

为满足4 m望远镜底座结构高刚度和轻量化的需求,研究了考虑结构变形和模态约束下的拓扑优化问题。首先,基于连续体结构拓扑优化的思想,以单元虚拟密度为设计变量,以位移变形和一阶频率及质量为优化约束,应变能最小为优化目标,建立了底座设计的拓扑优化数学模型,并详细推导目标函数及约束条件的灵敏度;然后,对底座结构应用拓扑优化设计,并以所得的理想概念构型为基础,进行底座结构的详细设计;最后,采用有限元法对优化模型进行静刚度和动刚度的分析与校核。设计结果表明,底座质量从27.66 t减至22.15 t;最大变形量由0.0377 mm减小为0.014 mm;一阶频率从217.1 Hz提高至247.45 Hz;在减小质量的同时,有效提高了底座结构的静刚度和动刚度,验证了拓扑优化方法的有效性。该方法将对4 m望远镜跟踪架的其他部件设计提供帮助。